Tender For Repairs To Path, Drainage, Culverts, Hard Standing Boundary Wall Fencing, Drains, Fencing And Connecting Items In Otm Area Under Age B/R-I Under Ge K Tee.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
20 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Path, Drainage, Culverts, Hard Standing Boundary Wall Fencing, Drains, Fencing And Connecting Items In Otm Area Under Age B/R-I Under Ge K Tee.
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out Soft/loose soil complete all as specified and as directed. |
| 2 | All as per item No 2 above but depth exceeding 1.5m and not exc 3.0 m depth complete all as specified and as directed. |
| 3 | M & L for Hardcore of gauge n exc. 63 mm Broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 4 | S&F precast cement concrete type B0 1:2:4 (12.5 mm graded aggregate) louvers and jallies 35 mm thick (measured solid) set in CM 1:4 including all mouldings but excluding frame and fixed complete all as specified and as directed. |
| 5 | M&L for providing 40mm thick cement concrete 1:2:4 type B1 (using 20mm thick graded stone aggregate) as in floor, laid in panels and position to conform to design and finishing top surface even and smooth with using extra cement incl demolition of cement concrete complete all as specified and as directed. |
| 6 | S&F 3mm thick and 38mm wide glass dividing strips as in floors inserted in position, conform to design complete all as specified and as directed. |
| 7 | Demoltion of cement concrete (un reinforced ) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 8 | M&L for 40 mm thick sand /stone dust cushioning for precast concrete interlocking paver block etc complete all as specified and as directed. |
| 9 | M&L for machine pressed precast concrete interlocking paver block, rubber finished any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over 75mm thick PCC 1:4:8 type D2 etc complete all as specified and as directed. |
| 10 | M&L for machine pressed precast concrete interlocking paver block, rubber finished any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade etc over 100 mm thick PCC 1:4:8 type D2 complete all as specified and directed complete all as specified and as directed. |
| 11 | M&L Black granite (of any type) work (table rubbed and polished) 20 mm thick as in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admixture of pigment to match with shade of granite including half round moulding and making hole for gas pipe over 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 12 | M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete incl demolition of brick work built in cement mortar complete all as specified and as directed. |
| 13 | M&L for half brick thick brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:4 incl demoltion of brick work in cement mortar complete all as specified and as directed. |
| 14 | M&L for 15mm thick plaster in CM 1:6 on fair face of brick walls finished even and smooth without using extra cement complete all as specified and as directed. |
| 15 | M&L for preparation for new surfaces of wall applying two coat of cement base paint on wall over chalk whiting etc complete all as specified and as directed. |
| 16 | M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls finished even and smooth without using extra cement incl taking down cement plaster of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 17 | M&L for 15mm thick plaster in CM 1:4 on brick or concrete surface finished even and smooth without using extra cement over average 20 mm thick dubbing out on irregular face of brick or concrete surface in CM 1:4 incl taking down cement plaster of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 18 | M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 19 | M&L for RCC 1:2:4 type B1 (using 20mm graded stone agg) as in slab and shelves supported on walls incl demolition of reinforeced cement concrete of any description and in any position complete all as specified and as directed. |
| 20 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 21 | M&L form work to soffits of suspended slab such as roof slab and similar work n. exc 200mm thick (horizental or sloping) rough finished flat surface complete all as specified and as directed. |
| 22 | M&L for 75mm thick PCC 1:3:6 type C2 (Using 40mm graded stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and rough to receive tile etc incl demolition of cement concrete 75mm thick as in plinth protection/path complete all as specified and as directed. |
| 23 | M&L for rubber moulded chequered cement concrete tiles of size 30cm X 30cm X 20mm thick with grey cement and pigment set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor over 75mm thick PCC 1:4:8 type D2 and screed bed 15 mm thick CM1:4 incl demolition of 100mm thick PCC complete all as specified and as directed. |
| 24 | Taking down of PVC, pipes of any size or pattern including all fittings etc complete all as specified and directed. |
| 25 | S&F in repair PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed |
| 26 | S&F in repair 110mm bore PVC (SWR) junction single (single T) equal or unequal with oval access door 110mm dia, jointed with approved adhesive complete all as specified and directed |
| 27 | S&F in repair PVC (SWR) bend 110mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed |
| 28 | S&F in repair PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed |
| 29 | S&F in repair 75mm bore PVC (SWR) junction single (single T) equal or unequal with oval access door 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed |
| 30 | S&F in repair PVC (SWR) bend 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed |
| 31 | S&F in repair PVC (SWR) floor trap with grating including jointing with solvent cement to waste pipe in run lead with dia of outlet 75mm complete all as specified and as directed. |
| 32 | S&F stack clamp out of 50mm x 5mm flat iron and 16mm dia round iron stays incl bolts and nuts and securing ends of stays to wall and roof for 75mm dia bore pipe complete all as specified and directed. |
| 33 | S&F stack clamp out of 50mm x 5mm flat iron and 16mm dia round iron stays incl bolts and nuts and securing ends of stays to wall and roof for 100mm dia bore pipe complete all as specified and directed |
| 34 | M&L for brooming down surfaces of any description and applying one coat of white wash on old decorated surfaces of walls including preparation of old surfaces & filling cracks and holes etc complete all as specified and directed. |
| 35 | M&L for brooming down surfaces of any description and applying two coat of white wash on old decorated surfaces of walls including preparation of old surfaces & filling cracks and holes etc complete all as specified and directed. |
| 36 | M&L for preparation old steel and iron surface not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 37 | M&L for preparation of old steel surfaces of any description not exc 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 38 | M&L for Preparing Old/New painted surfaces of wall and applying one coat of cement base paint complete all as specified and directed. |
| 39 | Dismantling fencing wire mesh, any type complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 40 | Dismantling fencing wire mesh, any type complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender