Tender For Special Repairs To Road And Road Side Berm At Soc And Harris Barrack And Special Repair To Road And Road Furniture Within Military Wing And Technical Area Of 515 Abw Under Ge(South) Bangalore.
Tender Value
68 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
19 days left
EMD
1.27 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Road And Road Side Berm At Soc And Harris Barrack And Special Repair To Road And Road Furniture Within Military Wing And Technical Area Of 515 Abw Under Ge(South) Bangalore.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for repairs to pot holes of any depth not exc 1.00 sqm each in area including sweeping free from dust and mud or water, scoring the sunken surfaces in roads etc cutting around edges to at least 25mm in depth , making good by applying tack coat @ 5kg per 10 Sqm (using paving bitumen of VG-10 grade), putting in premixed bituminous macadam, well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30mm complete all as specified and as directed. |
| 2 | Material and Labour for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm and depth not exc 50 mm etc complete all as specified and as directed. |
| 3 | M & L for Applying evenly a priming/ tack coat with bituminous primer using paving bitumen of VG-10 grade @ 5 Kg. Per 10 Sq. Metres.complete all as specified and as directed. |
| 4 | M & L for labour for premix bituminous macadam(Design Mix) with minimum 40-60 TPH bach type HMP using crushed stone aggregates of specified grading, premixed with VG-30 bituminous binder @ 4% by weight of total mix and cement as a filler, transporting the hot mix to work site, laying with a hydrostatic paver finished to the required grade, level and alighnment, rolling with smooth wheeled, vibratory and tindem roller to achieve the dezire compaction as per MORTH specification clause no 505 complete in all respects, (consolidated thickness 75 mm or less) etc, complete all as specified and as directed. |
| 5 | M&L for Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and as directed. |
| 6 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed. |
| 7 | M&L Bituminous premix semi dense asphaltic concrete, 30 mm consolidated thickness with 5.5% binder content by weight of total mix by using Paving bitumen (VG-30 grade) as in semi dense asphaltik concrete mixed in hot mix plant, rolled with 8 to 10tonne power roller and compacted to required camber and gradient all as specified and as directed. |
| 8 | M& L for preparing bituminous surface of road and marking 2.5mm thick centre line,stop lines,dashes,arrows etc. and the like not exceeding 10 cm wide on roads pavements with hot applied thermoplastic road marking paint of approved colour confirming to BS-3262-1989 with reflectorizing glass beads on bituminous surface with special applicator machine fitted with pufill shoe glass beads dispenser pupane tank heater and profile shoe heater with heating arrangement upto 160 degree C driven by experienced operator all as per manufacturer instruction complete all as specified and as directed.Note:- 1. Unit rate quoted by the contractor include for provision of red signals to keep off trafic from work. cleaning road surface and working during odd hours when trafic is light. 2. The line marking shall stand out boldly and solidly without showing any signs of scrach marks or suefaces underneath, if necessary the surface shall be remarked after removal of existing treatment untill the desired result is obtained. |
| 9 | S&F in repair cat eye solar reflective type of metal body alloy of size 100 mm x 100 mm x 20 mm with PAMA striplens reflector of model no DA 972 fixed with and including MS stud of suitable size all as per manufacturers instructions and as directed. |
| 10 | S & F in repair Solar Cat eye aluminium alloy shall(100% water proofing design according to 65) of size 125 mm x125 mm x25 mm(Shank 65 mm) of high efficiency Mono rystafie solar panel 2.4 v/0.3 watt one NI-ed rechargeable battery(1.2v/1600MA) consisting of super bright LED with 10000 to 18000 mcd completed as per manufacturers instructions etc. complete all as specified and as directed. |
| 11 | Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 12 | M&L for Pre-cast cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in solid block masonry exceeding 10cm in width and set in cement mortar (1:6) all as specified and as directed. |
| 13 | M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed. |
| 14 | M&L for fabricating,cutting,welding and finishing of the roadside information board of size 900 x 600 mm using SS-304 stainless steel round pipes and 1 mm thick SS sheet with all operations such as cutting of pipes ,sheets,TIG/ argon-ARC welding of joints,grinding,smoothing of welds and polishing of surfaces and fixing on the ground with PCC founadtion complete all as specfied and as direected. After completion of fabrication the surface of board shall be cleaned,degrease and paint the SS sheet with primer and two coats of blue PU paint alongwith applying white reflective vinyl lettering of approved size and style.(Note: Necessary excavation,returning, filling ,PCC for foundation ,stainless steel pipes((supply only) will be measured and paid seperately under respecivies items here in after). |
| 15 | M&L for fabricating,cutting,welding and finishing of the roadside information board of size 1200 x 900 mm using SS-304 stainless steel round pipes and 1 mm thick SS sheet with all operations such as cutting of pipes ,sheets,TIG/ argon-ARC welding of joints,grinding,smoothing of welds and polishing of surfaces and fixing on the ground with PCC founadtion complete all as specfied and as direected. After completion of fabrication the surface of board shall be cleaned,degrease and paint the SS sheet with primer and two coats of blue PU paint alongwith applying white reflective vinyl lettering of approved size and style.(Note: Necessary excavation,returning, filling ,PCC for foundation ,stainless steel pipes((supply only) will be measured and paid seperately under respecivies items here in after). |
| 16 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as approved by GE and as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern and laying of inter locking paver blocks into the sand bedding layer filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc complete all as specified and as directed.( Note :- Sand bedding layer will be measured and and paid seperately) |
| 17 | Supply only Stainless steel tubes of any size of 304 grade complete all as specified and as directed. |
| 18 | Excavation in post holes (or similar holes) each not exc 0.50 cum in soft/loose soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing of surplus soil to a distance not exc 50 meters and making good surface complete all as specified and directed. |
| 19 | Removing excavated material (soils) not exc. 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 20 | M&L for Plain Cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate in foundations, filling and mass concrete all as specified and as directed. |
| 21 | Supplying and fixing of polycarbonate 600mm dia road side safety convex mirror, outdoor type, 130-160 degree view, 50mtr supported by 50mm dia, 2mm thick MS pipe, and unbreakable frame all as per relevant IS code and as approved including excavation, PCC (1:3:6) in foundation, curing etc complete all as specified and as directed. |
| 22 | M & L for 75 mm thick PCC (1:4:8) type D-2 using 40 mm graded crushed stone aggregate as in sub base of floor etc all as specified and as directed. |
| 23 | M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) including finished even and smooth without using extra cement complete all as specified and as directed. |
| 24 | M& L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3(1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specfied and as directed. |
| 25 | M&L for Hardcore of broken stone or boulders of gauge not exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface all as specified and as directed |
| 26 | M&L for PCC (1:2:4), type B1 using 20 mm graded crushed stone aggregates as in cills, steps, seismic and other similar bands, plinth courses, string ourses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, back filling of pressed steel door frames complete all as spefcified and as directed |
| 27 | supplying and fixing Retroreflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved. Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A.The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete all as specfied and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender