Tender For Annual Plan-Pallikal Grama Panchayath Azhinjlashery Padam Public Well Motor Installation And Drinkng Water Supply -S0513/26-General Electrical Work
Tender Value
1.24 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
6 days left
EMD
3110
Bank guarantee accepted
Document Fee
555
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Malappuram → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Plan-Pallikal Grama Panchayath Azhinjlashery Padam Public Well Motor Installation And Drinkng Water Supply -S0513/26-General Electrical Work
BOQ
| Sl. No. | Item Description |
| 1 | wiring |
| 2 | OD533713/2025-2026: Supply, conveyance installation testing and commissioning of 5 HP Horizondal open well submersible motor pump set 2880 rpm at rated voltage 3 phase 350/415V 50HZ AC supply at 16 30 Mts head range of model DH50HH 1 5 65 X 50 D.O.L Deccan, Ekki pumps delivery size 50 mm or nearest size having using leak proof materials as pipe connected one by one to the motor up to the bottom of the well as required with necessary supports on both sides of the motor including giving connection as per the direction at site. |
| 3 | OD533523/2025-2026:Supply threading, laying and joining of 50 mm or nerest size Submersible ColumnPipe for bore well submersible pump Approved make specials as delivery pipe usingrequired leak proofing materials etc. as required. |
| 4 | 1.17.22:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm |
| 5 | 90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm |
| 6 | 2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415volts, residual current circuit breaker (RCCB), having a sensitivity current 30milli Amperes in the existing MCB DB complete with connections, testing andcommissioning etc. as required.40 amps |
| 7 | OD533529/2025-2026:S & F Motor starters of the following ratings Submersible pump controllers with single phase and low voltage preventer for three phase 5 to 10 HP submersible motor pumps (DOL) and giving connections etc as required L&T make |
| 8 | 90.14.24.2:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.2 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Capacitor, Cylinderical Type, suitable for direct connection to motors. |
| 9 | OD533536/2025-2026: Supply and providing 50 mm or nearest size stainless steel Hose Collar with hose clip |
| 10 | OD533531/2025-2026:Supply and providing 50 mm or nearest size dia PVC union etc as required |
| 11 | OD533522/2025-2026: Supply and providing 50 mm or nearest size dia Gun Metal Non return valve (ISI) |
| 12 | OD533730/2025-2026:Supply and providing 50 mm dia Full way valve (ISI) |
| 13 | OD533732/2025-2026:Supply and providing 50 mm dia Flange set |
| 14 | OD533525/2025-2026:Supply and fixing flat iron clamps made from 2 nos. 50x6 mm flat iron clamp of 50 mm with suitable size bolt and nut for fixing delivery pipe on the top of the well as required |
| 15 | 90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm |
| 16 | 1.21.5:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.50 mm |
| 17 | OD533535/2025-2026:Supply and laying of 14 mm or nearest size Nylon rope |
| 18 | 90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) |
| 19 | 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board |
| 20 | 2.1.1:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N |
| 21 | 5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 22 | 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) |
| 23 | 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) |
| 24 | OD533729/2025-2026:Supply and providing 25x6mm brass nut and bolt etc. as required. |
| 25 | OD533725/2025-2026:Supply, conveyance installation of dust and vermin proof, 3 Phase Syntax Meter Board( GS-MB-6535-STD-NF] and to fix KSEB meters, fuse units, CT etc as required including fixing it on wall, making good the damages colour washing etc. as required |
| 26 | OD533727/2025-2026:Supplying and fixing 32 A, 2 Way neutral links mounted on DMC/SMC base with connections, in existing meter board |
| 27 | OD533728/2025-2026:Supplying and fixing 32A, HRC Fuse with HRC Fuse link with connections, in existing meter board |
| 28 | OD533734/2025-2026:Supply, threading ,laying and jointing of the 50 mm "B' class GI pipe with all required accessories in ground/clamping as assupport pipe etc as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender