Tender For Proposed Construction Of Compound Wall At S.F. No. 207/14A, Block No. 28, Koyambedu Town, Aminjikarai Taluk, Chennai.
Tender Value
41.24 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
1 days left
EMD
31000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Proposed Construction Of Compound Wall At S.F. No. 207/14A, Block No. 28, Koyambedu Town, Aminjikarai Taluk, Chennai.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing scrub jungle of 1.45 acres in the land in S.F. No. 207/14A, Block No. 28, Koyambedu Town, Aminjikarai Taluk, Chennai and as directed by the Departmental officers. |
| 2 | Labour charges for Drilling / Boring towards provide under reamed cast in situ pile of 300mm (4m intervals) dia to a depth of 0.00 to 4.50 m from the Existing Ground level with single bulb including cost of machinery, labour charges and other materials required etc., all complete complying with relevant standard specifications and as directed by the Departmental officers. (excluding reinforcement & concrete) |
| 3 | Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil sandy loam and ordinary soil including excavated earth etc., all complete complying with relevant standard specifications and as directed by the Departmental officers. |
| 4 | Supplying and filling in foundation and basement with Sand gravel mix in ratio of 1:3 in layers of not more than 15cm thickness thoroughly mixed, well watered, rammed with surface vibrator and consolidated etc., complete complying with relevant standard specifications and as directed by the Departmental officers. |
| 5 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 6 | Providing and laying in position, Standardised Concrete Mix M-30 Grade using In-situ Concrete batching plant/ Ready Mix Concrete (RMC) adopting weigh batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including Conveyance of concrete from batching plant to Work site, Electricity charges and other works & labour cost involved for concrete production, laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 7 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc., complete complying with standard specification and as directed by the departmental officers. (Payment for the centering shall be given after the concrete is laid.) |
| 8 | Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete complying with standard specification and as directed by the departmental officers. Steel Adjustable telescopic props shall be rovided as directed by the departmental Officers. (Payment for the centering shall be given after the concrete is laid.) |
| 9 | Brick work in Cement Mortar 1:6 using best quality Fly ash Brick of size 230x110x75mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers. |
| 10 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 11 | Supplying ,fabricating and placing in position of Mild steel/Ribbed Tor steel grills for reinforcement for all RCC works including the cost of binding wire, bending, tying, etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. |
| 12 | Painting New Plastered Wall Surface with One finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat including the cost of primer, brushes,emulsion paints scaffolding curing etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 13 | Supplying and fixing Mild Steel grill Gate as per the approved design including one coat of red oxide primer, necessary screws, plugs and labour charges for fixing in position etc., all complete complying with relevant standard specifications and as directed by the Departmental officers. |
| 14 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with One coats of best approved first quality and colour of synthetic enamel paint over the priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 15 | Supply and Fixing of Caution Name Board of Size (0.90 × 0.60m) using M.S. Sheet 18 gauge of size 1.00 m x 0.70 m of Total length to have a board size 0.90 x 0.60 m and fixing the 'L'angle legs 2 Nos. of 3.60m height each post of 50mm x 50mm x 6mm to a length of 3m of above ground level 2 Nos. for verticals including cost of MS sheet, MS angle and around four sides fixing with MS angle of 25mm x 25mm x 1/8 \\" thick 'L' angle and including painting the board with 1st class synthetic enamel paint two coats over one coat of primer including earth work excavation of size 0.45 x 0.45 x 0.60 m and CC 1:5:10 using 40mm HB stone jelly of size 0.45 x 0.45 x 0.60 m including fixing, erecting, lettering the same ad etc., complete and as directed by the departmental officers. |
| 16 | Sub Total |
| 17 | GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender