Tender For Maintenance Work (Surface Dressing, Jungle Cleaning, Drain Cleaning, And Repairing And Other Miscellaneous Work) In Sector - 36 For Three Years, Greater Noida.
Tender Value
1.60 Crore
Estimated cost
Bid Submission
24 Jul 2026
2 days left
EMD
3.22 Lakhs
Bank guarantee accepted
Document Fee
2790
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gautam Buddha Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Work (Surface Dressing, Jungle Cleaning, Drain Cleaning, And Repairing And Other Miscellaneous Work) In Sector - 36 For Three Years, Greater Noida.
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing of the ground including removing vegetation and in equalities not exceeding 15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m (All kind of soil) DSR-18/2.28.1 |
| 2 | Cleaning jungle including up rooting of rank, vegetations grass, push, wood trees and samplings of grith upto 30 cms.measured at a height of 1 M. above ground level and removal of rubbish up to a distance of 50M. out side the removal of rubbish upto area cleared. SOR/259(i) Same as above but grass only SOR-20/259(a)/4.06 |
| 3 | Tractor with trolley including POL and driver SOR-20/SI.NO.19/Chapter-2 |
| 4 | Supply of labour SOR-20/SI.NO.12/Chapter-2 |
| 5 | Excavating holes more than 0.1 cum & up to 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil; as directed within a lead of 50 m and lift up to 1.5 m. All kind of soil (DSR-18/2.30.1) |
| 6 | Providing and fixing R.C.C direction board size 200x510x80mm make in one 1:1.5:3 including reinforcement and shuttering etc. all complete direction of Engineer-in-Charge |
| 7 | Cement concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (SOR-2020/281) |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade (SOR-20/647) |
| 9 | painting letters up to 2.5 cm. size including supply of all materials, labours & tools and plants etc. required for proper completion of the work. As in item 820 above but size above 8cm. but up to 15cm.SOR-20/822/21.07 |
| 10 | M-150 Brick Work 1:6 one cement & four Coarse sand of 2.20 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work. SOR-2020, item-305(a) |
| 11 | 12 mm cement plaster of mix |
| 12 | 1:6 (1 cement: 6 coarse sand) DSR-18/13.4.2 |
| 13 | Providing and fixing SFRC Cover over chamber. (without frame) 50mm thick. |
| 14 | Size: 600x600mm (Heavy duty) |
| 15 | Providing and fixing SFRC Cover over chamber. (with frame) 50mm thick. |
| 16 | Size: 600x600mm (Heavy duty) |
| 17 | Cement concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (SOR-2020/281) |
| 18 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 19 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (Sail Steel) (DSR-2018/10.25.2/AR) |
| 20 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer. |
| 21 | G.I. pipes. For gate cattle catcher DSR-18/10.26.2 |
| 22 | Excavation in foundation in ordinary soil (loam,clay or sand) icluding lift up to 1.50 m. and lead up to 30m. and including filling watering and ramming of excavated earth into the trenches or into the space of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in-charge upto a distance of 30m. from the foundation trenches ( where machine con not rech/move).SOR-251a |
| 23 | Depth from 0.0 to 1.5 M below G.L. |
| 24 | Supply of ISI marked RCC NP-2 pipes of following size including catting loading unloading at godown including all taxes and levies and rubber rings. |
| 25 | 300mm NP-2 dia. RCC Pipes |
| 26 | 350mm NP-2 dia RCC Pipes |
| 27 | 400mm NP-2 dia RCC Pipes |
| 28 | 450mm NP-2 dia RCC Pipes |
| 29 | 600mm NP-2 dia RCC Pipes |
| 30 | Providing and laying in position cement concrete 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) in concrete cradle under NP-2 pipe of folling diameter including centring shuttring but excluding excavation: |
| 31 | 300mm NP-2 dia. RCC Pipes |
| 32 | 350mm NP-2 dia RCC Pipes |
| 33 | 400mm NP-2 dia RCC Pipes |
| 34 | 450mm NP-2 dia RCC Pipes |
| 35 | 600mm NP-2 dia RCC Pipes |
| 36 | Laying of NP-2 RCC S&S pipes jointing with stuff mixture of cement mortar in the propertion of 1:2 (1 cement :2 coarse sand) including testing of jointed complete |
| 37 | 300mm NP-2 dia. RCC Pipes |
| 38 | 350mm NP-2 dia RCC Pipes |
| 39 | 400mm NP-2 dia RCC Pipes |
| 40 | 450mm NP-2 dia RCC Pipes |
| 41 | 600mm NP-2 dia RCC Pipes |
| 42 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement: 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : DSR-18/18.33.1 |
| 43 | With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 44 | Hiring of portable Re-cycle jetting calus section machinenmounted on mahindra volero maxi with hydraqulically operate mahindra de-silter upto depth of 15 water with driver for the area to gr.noida as direated by engineer in-chare for 8.50 hours per day overfine will be paid on pro rate basic processure 3000 PSI liters, rate as per (GNIDA) |
| 45 | Tractor with water tanker with cost water including POL SOR-20/SI.NO.27/Chapter 2 |
| 46 | Providing JCB with driver and including POL (AR/GNIDA) (SOR-20/S/NO. 31/Chapter 2) |
| 47 | Labour Cess and GST will be paid extra as per govt.orders Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender