Tender For Upgradation Works Of 3 Vip Rooms In Private Wards, Aiims Raipur.
Tender Value
42.91 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
13 days left
EMD
86000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raipur → Chhattisgarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Works Of 3 Vip Rooms In Private Wards, Aiims Raipur.
BOQ
| Sl. No. | Item Description |
| 1 | Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : |
| 2 | Cement mortar 1:6 (1 cement : 6 Coarse sand) |
| 3 | Providing and fixing 15-18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black, Cherry/Ruby red |
| 4 | Area of slab over 0.50 sqm |
| 5 | Providing and fixing 15-18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias, skirtings and similar locations of required size, approved shade, colour and texture laid with epoxy resin based adhesive, joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, cleaning, moulding and polishing to edges to give high gloss finish etc. complete at all levels: Granite stone slab colour black, Cherry/Ruby red and any size: Area of slab upto 0.50 sqm |
| 6 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. |
| 7 | 40 mm |
| 8 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 9 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 10 | 250x16 mm |
| 11 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 12 | 200x10 mm |
| 13 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 14 | Twin rubber stopper |
| 15 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete |
| 16 | Double strip (horizontal type) |
| 17 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. |
| 18 | 1.0 mm thick |
| 19 | Providing and fixing factory made uPVC glazed/ wiremesh windows/ doors compising of lead free uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles having minimum wall thickness of minimum 1.70 mm for series R1 and R2 profiles and 2.10 mm for series R3 and R4 profiles confirming to EN: 12608 in any shape colour and design duly reinforced with galvanized mild steel section made of required shape and size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimention appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel scews etc. Profile of frame, sash and mullion (if required) shall be mitred cut and fusion welded/ mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjucent finished wall shall be filled with weather froof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing confirming to CPWD Specification and direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh/ Glazing of plain/ toughened/ laminated/ double glass unit with/ without high performance coatings as per design requirements and confirming to IS: 3548 and IS: 16231 shall be paid separately. |
| 20 | Two track two panels sliding window with aluminium channel for roller track, woolpile, nylon rollers with SS 304 body.Using R4 series with frame (64 mm and above) x (45 mm and above) & sash (44 mm and above) x (55 mm and above) with zink alloy (zamak) powder coated handle on every pannel along with multi-point locking system (height above 1.8 metre) |
| 21 | Two track four panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on three panels along with multi-point locking system, adjustable nylon rollers with SS 304 bodyUsing R4 series with frame (64 mm & above) x (45 mm & above) & sash (44 mm & above) x (85 mm & above). (Height above 2.5 metre) |
| 22 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. |
| 23 | 100mm |
| 24 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer in- Charge.(Payment of providing and fixing auto closing hinges shall be paid separately) |
| 25 | Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. |
| 26 | 200mm |
| 27 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. |
| 28 | Providing and laying fluted and non-fluted Vitrified tiles ( as per direction of Engineer-in Charge) in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). |
| 29 | Size of Tile 1000x1000 mm |
| 30 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). |
| 31 | Size of Tile 1000x1000 mm |
| 32 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI |
| 33 | slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with Galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. |
| 34 | 12 mm cement plaster of mix : |
| 35 | 1:6 (1 cement: 6 fine sand) |
| 36 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 37 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour |
| 38 | Old work (one or more coats) |
| 39 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge |
| 40 | In cement mortar |
| 41 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : |
| 42 | Of area 3 sq. metres and below |
| 43 | Dismantling tile work in floors and walls laid in cement mortar including stacking material within 50 metres lead. |
| 44 | For thickness of tiles 10 mm to 25 mm |
| 45 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 46 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 47 | Flat back wash basin of size 550x400 mm |
| 48 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 49 | 50 mm nominal dia Pipes |
| 50 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with onen step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls as original etc. |
| 51 | 20 mm nominal dia Pipes |
| 52 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 53 | 25 to 40 mm nominal bore |
| 54 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 55 | 20 mm nominal bore |
| 56 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length |
| 57 | 15 mm nominal bore |
| 58 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 59 | 15 mm nominal bore |
| 60 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 61 | 15mm nominal bore |
| 62 | Providing and fixing PTMT grating of approved quality and colour. Circular type |
| 63 | 100 mm nominal dia |
| 64 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. |
| 65 | With stainless steel cover plate minimum 1.25 mmthickness |
| 66 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 67 | Providing and fixing concealed hinge of approved quality for 19-20mm thick door with stainless steel screws complete : |
| 68 | Providing and fixing decorative PVC wall paneling of minimum 10 mm thickness over the existing wall, fixed with aluminium channel/tube frame, including edge banding, groove pattern or any other approved pattern as required, complete with necessary screws, fasteners, fixing arrangements, hardware, and finishing. The work also includes making good the surrounding surfaces and all incidental works, complete in all respects as per the direction of the Engineer-in-Charge.The brand to be used shall be Clubtree/ Pare/ Delby or Equivalent and shall be approved by Engineer-in Charge |
| 69 | Providing and fixing 8 mm thick laminated wooden flooring conforming to EN 13329:2006, with plank size not less than 1200 mm × 190 mm, having Unilin / tongue and groove locking arrangement, with 0.2 mm thick top abrasive / cushion layer over high density fibreboard (HDF) core board, laid over prepared base including necessary underlay, complete in all respects as directed by the Engineer-in-Charge.The brand to be used shall be Ego Brand or equivalent having density >= 800 kgper cum, Moisture content 6%, Thickness 8mm+-3mm. The brand to be used shall be approved by Engineer-in Charge |
| 70 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting,of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete(Models as per approved makes) as per direction of Engineer-in-Charge.The brand to be used shall be Cera (CADMOS) or equivalent and shall be approved by Engineer-in Charge. |
| 71 | Supplying and fixing premium zebra blinds made of dual-layer woven polyester fabric with alternating horizontal sheer and opaque bands, including powder-coated head rail, bottom bar, side channels, control mechanism (chain / roller system), and all necessary mounting hardware, complete in all respects as directed by the Engineer-in-Charge.The brand to be used shall be Marvel or equivalent and shall be approved by Engineer-in Charge. |
| 72 | Providing and fixing complete set of bathroom fittings comprising 15 mm dia CP brass single lever telephonic wall mixer with shower, hand shower and 15 mm dia CP brass single hole basin mixer of approved make (CERA – Model No. F1099403 Wall Mixer, F1099101 Pillar Cock, F7030308AB Hand Shower, F7010117AB Shower or equivalent), including cutting, necessary fittings, brackets, painting of brackets, and making good the walls complete as directed by the Engineer-in-Charge. |
| 73 | Providing and fixing oval / Rounded shaped decorative mirror of superior glass of required size 400 mm × 900 mm, and thickness not less than 5mm with plastic moulded frame of approved make and shade, including 6 mm thick hardboard backing, fixing to wall with necessary C.P. brass screws, rawl plugs, etc., complete in all respects as directed by the Engineer-in-Charge.The brand to be used shall be Saint Gobain or equivalent and shall be approved by Engineer-in Charge. |
| 74 | Providing and fixing C.P. brass toilet paper holder of approved make and quality, complete with C.P. brass screws, washers, wall plugs, etc., including drilling holes in wall and making good the same, complete in all respects as directed by the Engineer-in-Charge.The brand to be used shall be Aquarium (R-1008) or equivalent and shall be approved by Engineer-in Charge. |
| 75 | Providing and fixing C.P. brass decorative type towel holder set consisting of towel holder, soap tray with dispenser, tumbler holder, and robe hook, including all necessary screws, fittings, and accessories required for proper installation. The item shall be of approved make and fixed as per the instructions of the Engineer-in-Charge, complete in all respects.The brand to be used shall be Aquarium (R-1008) or equivalent and shall be approved by Engineer-in Charge. |
| 76 | Providing and fixing SS 304 stainless steel linear/piano type shower drain channel of size 100 mm width × 500 mm length, including removable grating, trap connection, frame, and all required fittings, complete in all respects as per approved make and direction of Engineer-in-Charge.The brand to be used shall be Dorein (SD102) or equivalent and shall be approved by Engineer-in Charge. |
| 77 | Supplying and placing of constructed Decorative Sofa made from commercial plywood of required thickness with heavy tension webbing springs. Seating and back padded with high-resilience polyurethane foam of density 30–40 kg/m³. Sofa to be fully upholstered. Understructure to consist of MS chrome-plated legs with protective shoes at the bottom to prevent scratches on the floor. Complete in all respects.as per instruction of Engineer in charge.The brand to be used shall be Saraf, furnitech or equivalent and shall be approved by Engineer-in Charge. |
| 78 | 3-seater L-shaped sofa (lenght not less than 2.44 metre or 8 feet) |
| 79 | 1 seater Sofa |
| 80 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit & accessories as required. |
| 81 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 82 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 83 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 84 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 85 | 5/6 A switch |
| 86 | 15/16 A switch |
| 87 | 3 pin 5/6 A socket outlet |
| 88 | 6 pin 15/16 A socket outlet |
| 89 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 90 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 91 | 3Module |
| 92 | 6Module |
| 93 | 8 Module |
| 94 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 95 | Single pole |
| 96 | Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal ( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req |
| 97 | 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min |
| 98 | LED Down lighter (COB Type) (System lumen efficacy ≥120 lm/Watt ) Supplying, installation, Testing & Commissioning of LED Recessed / surface / designer wall lamp Down lighter (Round / square/ Rectangular) COB Type of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), life time of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. \\"complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).Powder coated die cast /Extruded aluminium Body including trim with Aluminium Reflector. |
| 99 | 12-15w |
| 100 | Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends,CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).CRCA Sheet Body (Thickness ≥ 0.50 mm) |
| 101 | 40 watt Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender