Tender For Work Services For Certain Revenue And Minor Works At Af Stn Sirsa
Tender Value
22.72 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
5 days left
EMD
45440
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sirsa → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Work Services For Certain Revenue And Minor Works At Af Stn Sirsa
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE 'A' PART-I (MISC B/R & E/M SERVICES IN STN ARMOURY) |
| 2 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion alongwith PCC foundation and removal from site complete all as specified and directed.NOTE: Earthwork shall be measured seperately. |
| 3 | Dismantling fencing wire mesh, chain link fence, etc any type incl cover fillets, nuts & bolts and MS bars and removal from site complete all as specified and directed. |
| 4 | Dismantling barbed wire fencing, in any location complete and removal from site incl all safety gear and scaffoldings etc complete all as specified and directed. |
| 5 | Excavating in post holes (or similar holes) each n exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance outside MOD/AF land and making good surface complete all as specified and directed. |
| 6 | M&L cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in filling and mass concrete complete all as specified and directed. |
| 7 | M&L for mild steel angle posts, struts and similar primary members for chain link fencing, including cutting to length, drilling holes, notching, welding/bolting, erection in position, alignment and fixing complete, conforming to Fe-290 Gde E-165, all as specified and directed. |
| 8 | M&L preparing new or previously untreated Steel and Iron Surfaces in fencing, gates etc, of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a Red Oxide Primer complete all as specified and directed. |
| 9 | S&F galvanized 2 strand steel barbed wire fencing conforming to IS : 278, with 2.24 mm dia. barb wire conforming to IS : 280 with zinc coating as per IS : 4826, barbed with 2 mm dia. barbs at 75 mm spacing and straining and fixing to any type of standard rails/RCC fencing posts straining bolts, including securing or tying at crossing with and fixing of galvanized mild steel wire, staples or steel pins etc., complete all as specified and directed. (Note: - Each line of wire will be measured) |
| 10 | Demolition Cement Concrete (Reinforced) of slabs and similar work (reinforcement cut as required to facilitate demolition) and removing debris, etc. to Outside MOD Land, complete all as specified and directed. NOTE: Old reinforcement shall be measured under Sch of Credit. |
| 11 | M&L Reinforced Cement Concrete 1:2:4 type B0 (12.5mm graded stone aggregate) as in slabs supported on walls, beams and columsn in floors, roofs, landings, balconies, canopies, deck slabs and in Shelves etc complete all as specified and directed.(NOTE: MS reinforcement & Formwork shall be measured and paid seperately) |
| 12 | M&L for formwork to soffits of suspended slabs such as roof slabs, kitchen slabs, shelves, floor slabs, landings, chajja and similar work; not exceeding 200 mm thick (horizontal or sloping) for rough finished surfaces complete all as specified and directed. |
| 13 | M&L TMT Bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hoping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia or securing with Clips, complete all as specified and directed. |
| 14 | M&L cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in filling and mass concrete complete all as specified and directed. |
| 15 | Supply and laying machine pressed precast concrete interlocking paver block with grey cement and pigment of any shape and size as approved by GE conforming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed. (NOTE: Sand for cushioning level will be measured and paid seperately) |
| 16 | M&L for sand cushioning with clean river sand duly clear of residual, organic and deleterious materials spread evenly to uniform thickness over PCC Sub Base complete all as specified and directed. |
| 17 | Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., and removal of debris outside AF land complete all as specified and directed. |
| 18 | M&L for Brick Work with Fly-Ash Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and directed. |
| 19 | Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and directed. |
| 20 | M&L for Rendering 15mm thick in cement mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement complete all as specified & directed. |
| 21 | M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound (as per manufacturer's instructions) on external surfaces of brick/stone walls or concrete surfaces finished even and fair upto 4 storey height including necessary scaffloding complete all as specified and directed. Note : WPC shall be measured & paid seperately as \\"Supply only\\". |
| 22 | Supply only Liquid Water Proofing Compound, as approved, complete all as specified and directed. |
| 23 | M&L for preparing new/undecorated plastered surfaces of walls, applying 1.5 mm thick wall putty in two layers of 0.75 mm thickness each, including rubbing down with sand paper to obtain smooth and even surface, applying one coat of suitable primer and finishing with two coats of acrylic distemper of approved shade/tint, complete all as specified and directed by Engineer-in-Charge |
| 24 | M&L for applying two coats of Weather Proof Exterior Acrylic Emulsion Paint (having anti-dust & anti-fungal properties) [IN CAMOUFLAGE PATTERN] over a coat of suitable exterior primer of approved make for any building height including necessary scaffolding, safety and protective measures complete all as specified and directed. |
| 25 | M&L for Rendering 10mm thick in cement mortar 1:3 on Concrete Surfaces of Ceilings, soffits etc, Surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 26 | M&L for preparing newly Plastered surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and directed. |
| 27 | M&L for providing and fixing powder coated aluminium work (minimum powder coating thickness 50 microns) for frames of doors, windows, ventilators and fixed portions of partitions, using extruded built-up standard tubular sections, appropriate Z-sections and other sections of approved make conforming to IS 733 and IS 1285, fixed with dash fasteners of required dia and size, including filling gaps at junctions, i.e. at top, bottom and sides with EPDM rubber/neoprene gasket, aluminium sections smooth, straight, rust free, mitred and mechanically jointed wherever required, including cleat angles, aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 28 | M&L for providing and fixing powder coated aluminium work (minimum powder coating thickness 50 microns) for frames of doors, windows, ventilators and fixed portions of partitions, using extruded built-up standard tubular sections, appropriate Z-sections and other sections of approved make conforming to IS 733 and IS 1285, fixed with dash fasteners of required dia and size, including filling gaps at junctions, i.e. at top, bottom and sides with EPDM rubber/neoprene gasket, aluminium sections smooth, straight, rust free, mitred and mechanically jointed wherever required, including cleat angles, aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender