Tender For 8539/E8 Provn Of Security Light From Ksp Pump House, Provn Of 50 X Ceiling Fans ,100 X Exhaust Fans, 01 X Adm Technical Store With Washroom, Toilet Block Of 167 Inf Bde C , Installation Of Lightning Arrester, Security Fencing At Dental Sec
Tender Value
39.04 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
20 days left
EMD
78100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for 8539/E8 Provn Of Security Light From Ksp Pump House, Provn Of 50 X Ceiling Fans ,100 X Exhaust Fans, 01 X Adm Technical Store With Washroom, Toilet Block Of 167 Inf Bde C , Installation Of Lightning Arrester, Security Fencing At Dental Section And Arboriculture & Rain Harvesting At Shahjahnpur Cantt Under Ge (East) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n exc 30 cm and averaging 15 cm and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 3 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m but n.exc 3.0 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 4 | Returning fillng in , including spreading , levelling , watering and well ramming in layers not exc 25cm complete all as specified and directed. |
| 5 | Removing excavated material n exc 50m and depositing where directed at a level n exc 1.50M above the starting point complete all as specified and directed. |
| 6 | M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in fdn, floors etc complete all as specified and directed. |
| 7 | M&L for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in foundation footing, Plinth, lintel / roof beam complete all as specified and directed. |
| 8 | M&L for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 9 | M&L for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and column in floors, roofs, landings, deck slabs complete all as specified and directed. |
| 10 | M&L for 10 mm dia TMT Bar and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. . |
| 11 | M&L for 6 to 8mm dia TMT Bar and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia as in spacers & biinders complete all as specified. |
| 12 | M&L for 6 to 10 mm dia TMT Bar and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia as in stirrups complete all as specified and directed. |
| 13 | Form work to sides of concerte, foundation, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to butter as specified and directed by GE. |
| 14 | S&F formwork to soffits of suspended slabs such as roof slabs, roof beam floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) as specified and directed. |
| 15 | S&F form work to sides of formwork to sides of pillars, posts, struts, piers, columns and stanchion and similar work vertical as specified and directed. |
| 16 | M&L for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in Chajjas complete all as specified and directed. |
| 17 | Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed. |
| 18 | M&L for fly ash Brick work with old size bricks having crushing strngth not less than 75kg/sqcm, straight or curved on plan bricks built in cement mortar 1:6 complete all as specified and directed. |
| 19 | M&L for 15mm thick rendering on brick work or concrete surface in CM 1:4 mixed with WPC @ 2% by weight of cement finishing the surface fair & even complete all as spfd and directed. Note:- WPC shall be measured and paid saperately. |
| 20 | M&L for rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces finished even and smooth without using extra cement complete all as specified and directed by GE. |
| 21 | M&L for rendering 10 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 22 | M&L for hard core broken brick gauge n exc 63mm, deposited spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed by GE. |
| 23 | M&L for 75 mm PCC 1:4:8 type D-2(40 mm graded stone aggregate ) as in sub base complete all as specified and directed by GE. |
| 24 | M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4 with WPC on roof surfaces complete all as specified and directed by GE. |
| 25 | M&L for nonskid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile complete all as specified and directed. |
| 26 | M & L for 300mm x 600 mm 7 to 8 mm thick glazed coloured ceramic tiles as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed. |
| 27 | M & L for machine cut kota stone slab flooring 20-25mm thick including 20 mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 28 | M & L for machine cut kota stone slab 20-25mm thick, as in riser of steps, skirting, dado and pillar including 10 mm thick cement plaster in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 29 | M&L for Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. |
| 30 | M & L for 7 to 8 mm thick glazed coloured ceramic tiles (square/ rectangular) with border , area of each tile area (300 x 450/300 x 600 mm size approved by GE), as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed. |
| 31 | Supply only liquid water proofing compound |
| 32 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate)as in plinth protection finished even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete with and including necessary form work etc complete all as specified and as directed by GE. |
| 33 | S & F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing MAKE-fenesta,rajshri plastiwood,madhu industries. As per approved by GE. |
| 34 | S&F for 30 mm thick Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. Please Enable Macros to View BoQ information |
| 35 | S&F for 30 mm thick Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender