Tender For Repairs & Replacement Of Doors/Windows, Floor/Wall Tiles & Misc Works In Mutaga, North & Tilakwadi C Area Of Ats Belagavi Under Ge(Af) Sambra
Tender Value
24.99 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
21 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Belagavi → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs & Replacement Of Doors/Windows, Floor/Wall Tiles & Misc Works In Mutaga, North & Tilakwadi C Area Of Ats Belagavi Under Ge(Af) Sambra
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified & directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level), complete all as specified & directed. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) of any thickness and in any position and removing serviceable tiles to store and rubbish off the premises complete all as specified & directed. |
| 4 | Dismantling and breaking up drain pipes (salt glazed ware, AC, reinforced concrete, PVC or Cast iron) set in cement mortar of size 100mm/75mm fixed over wall or in floor including clamps etc., complete all as specified & directed. |
| 5 | Taking down cement rendering/plastering of any thickness and of any description including raking out joints, hacking for key, scrubbing down with water etc., over wall or ceiling surfaces complete all as specified & directed. |
| 6 | Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) including hold fasts from wall and making good in cement mortar 1:4 complete all as specified & directed. |
| 7 | Taking down chowkhats or frames exceeding 1.5 Sqm each but not exceeding 4 Sqm each with shutters (without taking off shutters from the frames) including hold fasts from wall and making good in cement mortar 1:4 complete all as specified & directed. |
| 8 | Taking down shutter of any description and material exceding 1.00 Sqm but not exceeding 2.00 Sqm each complete all as specified & directed. |
| 9 | S&F in repairs vitreous China wash hand basin, of size 550X400mm white in colour, and 32mm bore dia CP finish copper alloy waste fitting/coupling, including cutting for and pinning complete all as specified & directed. |
| 10 | M&L for two coats of white wash on old plasterd ceiling surfaces including necessary filling of voids with wall care putty complete all as specified & directed. |
| 11 | Dismantalling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work complete all as specified & directed |
| 12 | S&F Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturer's instructions (metal frame work paid separately) including two coats of oil bound distemper duly filled the voids with wall care putty including preparation of surfaces complete all as specified & directed |
| 13 | S&F Gl frame work (size of grid not exc. 605mmX605mm) for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 14 | S&F in repairs fancy type 15mm bore dia long body fancy type bib tap chromium plated cast copper alloy, screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete all as specified & directed. |
| 15 | S&F in repairs fancy type 15mm bore dia short body fancy type bib tap chromium plated cast copper alloy, screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete all as specified & directed. |
| 16 | S&F in repairs 15mm bore dia fancy angle stop valve, chromium plated, cast copper alloy, screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete all as specified & directed. |
| 17 | S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified & directed. |
| 18 | S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified & directed. |
| 19 | S&F in repairs 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float, and handle/push type, including 32mm bore dia PVC long/short flusing pipe and brackets complete all as specified & directed. |
| 20 | S&F in repairs fancy type square shape of minimum size 100mmX100mm swivel shower of cast stainless steel, including CP finish shower rod (long) and cup washer/wall flange for fixing with 15mm bore dia pipe/fittings complete all as specified & directed. |
| 21 | S&F in repairs tubular brass chromium plated Towel rail 20mm dia \\"D\\" type 60cm long between flanges complete all as specified & directed. |
| 22 | S&F in repairs CP finish soap dish cast stainless steel fixed to plugs complete all as specified & directed. |
| 23 | S&F in repairs 15mm bore dia, cast copper alloy CP finish wall mixer cast copper alloy, for mixing hot & cold water screwed down for water pipe/fittings complete all as specified & directed. |
| 24 | Taking down shutter of any description and material (Wooden,Aluminium/UPVC) from frame/chowkhat exceeding 1 Sqm but not exceeding 2 Sqm each and re-fixing in the same opening after necessary repairsing, ease and adjust, cutting, grinding, adjusting, including using new nails/screws complete all as specified & directed. Note:- Material required other than mentioned in this item for repairsing shall be paid under respective supply only item. |
| 25 | Taking down shutter of any description and material (Wooden,Aluminium/UPVC) from frame/chowkhat not exceeding 1 Sqm each and re-fixing in the same opening after necessary repairsing, ease and adjust, cutting, grinding, adjusting, including using new nails/screws complete all as specified & directed. Note:- Material required other than mentioned in this item for repairsing shall be paid under respective supply only item. |
| 26 | S&F in replacement stainless steel wire cloth 0.36mm dia of wire and average width of aperature 1.40mm and fixed in wooden/steel door/window shutters including new second class hard wood beading of required size to secure the wire cloth/mesh/welding/nut bolt complete all as specified & directed. |
| 27 | S&F 4mm thick sheet glass, ordinary quality, in squares, pane including taking down from wooden/steel/aluminium shutter of any description including using necessary size of second class hard wood beading to secure the glasss complete all as specified & directed. |
| 28 | Supply only 100mm medium weight mild steel butt hinges complete all as specified & directed. |
| 29 | Supply only 100mm medium weight stainless steel butt hinges including necessary stainless steel screws of reqd size complete all as specified & directed. |
| 30 | S&F 150mm long cast type anodised aluminium handle type complete all as specified & directed. |
| 31 | Supply only 150mm long cast type anodised aluminium handle type complete all as specified & directed. |
| 32 | S&F floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring and vulcanised rubber piece of cover plate 140mm length complete all as specified & directed. |
| 33 | Supply only floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring and vulcanised rubber piece of cover plate 140mm length complete all as specified & directed. |
| 34 | S&F in repairs for 250mm length of bolt, Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed. |
| 35 | S&F in repairs 200mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified & directed. |
| 36 | Supply only 200mm length of bolt, aluminium anodised barrel tower bolts of extruded section, complete all as specified & directed. |
| 37 | Supply only for 250mm length of bolt, Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed. |
| 38 | S&F factory made single extruded WPC (Wood Polymer Composite) solid one side decorated and other side plain flush door shutter of 30mm thickness comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge complete all as specified & directed. (Note: Stainless steel butt hinges and necessary S S screws shall be measured and paid separately) |
| 39 | S&F 17mm to18mm thick WPC board of approved make of one side prelam/rigidlam and other side plain colour fixed with screws, solvent cement/adhesive to make cup board/ cabinet shutters/drawer front/sides, partitions, shelves etc. including 1mm thick PVC lipping/beading fixed with solvet over edges of ply of required width and colour complete all as specified and directed. |
| 40 | S&F sleek soft hydraulic auto closing 3D (Big bend/middle bend/straight arm type) stainless steel finish hinges openable of 0 or 15 degree crank for cup board/ cabinet shutters (sample available in GE Office) complete all as specified and directed. |
| 41 | Supplying and laying of 25mm dia nominal size CPVC pipes SDR 11 including plain & brass threaded special fittings of same size or of reducer or enlarged size, fixed to wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of any description and their making good including taking down of existing tubing of any type complete all as specified & directed. |
| 42 | Supplying and laying of 20mm dia nominal size CPVC pipes SDR 11 including plain & brass threaded special fittings of same size or of reducer or enlarged size, fixed to wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of any description and their making good including taking down of existing tubing of any type complete all as specified & directed. |
| 43 | S&F 30mm thick factory made wire mesh solid WPC door shutter consisting of Density 650 Kg /Cum manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws.Other hardwares should be fixed with 19x6mm size steel screws etc.cComplete as per direction of Engineer-in -charge, manufacturer's specification & drawings. |
| 44 | S&F in repairs high grade plastic, bath room mirror cabinet of size 450mmX350mm & 3mm thick looking mirror of make Modifloat or equivalent fixed to wooden/PVC plugs with screws complete all as specified & directed. |
| 45 | S&F in repairs 600 mm x 450 mm bevelled edge mirror of selected quality glass ,mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated screws and washer complete all as specified & directed. |
| 46 | S&F in repairs Toilet paper holder with flat recessed type stainless steel material complete all as specified & directed. |
| 47 | S&F in repairs vitreous china wash down water closet pan, pedestal pattern white (excluding flushing cistern) including plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified & directed. |
| 48 | S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including necessary PCC bedding, connected to PVC/CI pipes complete all as specified & directed. |
| 49 | M&L for cleaning and removing of all scale and dirt etc., from tanks, and from mouth of circulating pipes etc. including using 50gm of bleaching powder per tank after disconnecting of outlet pipe and re-connecting in the same position, capacity of tank exc. 250 litres but not exc. 500 litres each and marked on tank with white synthetic enamel paint as \\" tank cleaned on ________\\" using stencil complete all as specified & directed by Engineer-in-Charge. |
| 50 | M&L for cleaning and removing of all scale and dirt etc., from tanks, and from mouth of circulating pipes etc. including using 70gm of bleaching powder per tank after disconnecting of outlet pipe and re-connecting in the same position, capacity of tank exc. 500 litres but not exc. 1000 litres each and marked on tank with white synthetic enamel paint as \\" tank cleaned on ________\\" using stencil complete all as specified & directed by Engineer-in-Charge. |
| 51 | S&F PVC water storage cover of 500/1000 liter capacity of any description and shape as per existing water storage tank including necessary locking facility complete all as specified & directed |
| 52 | S&F in repairs vitreous China half stall urinal of size 350mmX340mmX615mm, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement; fixing to flushing cistern, flush pipe, 40mm bore dia CP finish cast copper alloy waste fitting, CP finish urinal spreader complete all as specified & directed. |
| 53 | S&F in repairs 32/40mm dia PVC flexible waste pipe for wash hand basin, kitchen sink, urinal or similar work complete all as specified & directed. |
| 54 | S&F in repairs 32mm dia CP finish cast copper alloy waste fitting for wash hand basin, with long screwed shanks and fly nut and flange end, bedded in red lead cement complete all as specified & directed. |
| 55 | S&F in repairs CP finish cast copper alloy waste fitting of outlet 32mm dia for stainless steel kitchen sink, as per existing size and designs, with long screwed shanks and fly nut and flange end, bedded in red lead cement complete all as specified & directed. |
| 56 | M&L for pre-cast cement concrete block, (1:3:6), type C1 (using 20mm nominal size, crushed and graded stone aggregate) masonry with solid blocks and setting in cement mortar (1:6) having minimum compressive strength of 50 Kg per Sqcm including dismantling of existing masonary work complete all as specified & directed. |
| 57 | M&L for plain cement concrete, 25mm thick, (1:2:4), type B-0 (using 12.5mm nominal size crushed and graded stone aggregate) for levelling/to receive screed for laying floor finish, finished fair and even complete all as specified & directed. |
| 58 | M&L for plain cement concrete, 75mm thick, (1:2:4), type B-1 (using 20mm nominal size crushed and graded stone aggregate) for sub-base of floors & in pavings or of similar work finished fair and even complete all as specified & directed. |
| 59 | M&L for plain cement concrete, 75mm thick, (1:3:6), type C-1 (using 20mm nominal size crushed and graded stone aggregate) for plinth protection including filling of expansion joint with bituminous mixture finished fair and even complete all as specified & directed. |
| 60 | M&L for plain cement concrete, 75mm thick, (1:4:8), type D-1 (using 20mm nominal size crushed and graded stone aggregate) for sub-base of floors or of similar type of work finished fair and even complete all as specified & directed. |
| 61 | S&F in repairs white colour vitreous China floor mounted water closet 'P'/'S' trap (single piece) element rimless with integrated jet flush one piece including all accessoreis i.e seat cover, 1.5m flexible PVC pipe and CP finish, cast copper alloy 15mm bore dia health faucet, 15mm bore dia PVC connection pipe 450mm long, including two way bib cock 15 mm bore dia complete all as specified & directed.Make: Cera / Parryware / Jaguar / KEROVIT / Hindware / Johnson or equivalent make |
| 62 | M&L for plain cement concrete 1:2:4, type B-1 (using 20mm nominal size crushed and graded stone aggregate) as in coping, hold fast or of similar type of work including necessary form work complete in all respectas specified & directed. |
| 63 | M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified & directed. |
| 64 | M&L for coloured non-skid ceramic tiles 6-7mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exc 0.38 sqm in floor, set and jointed in neat cement slury and pointed in white cement with pigment to match the shade of tiles laid over and including cement screed bed or bedding layer of 15mm thick in cement mortar 1:4 complete all as specified & directed. Please Enable Macros to View BoQ information |
| 65 | M&L for coloured non-skid ceramic tiles 6-7mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exc 0.38 sqm in floor, set and jointed in neat cement slury and pointed in white cement with pigment to match the shade of tiles laid over and including cement screed bed or bedding layer of 15mm thick in cement mortar 1:4 complete all as specified & directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender