Tender For Repair Of Steel Furniture Including Painting Polishing At Rajouri Under Aor Of Ge 862 Ews
Tender Value
32.29 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
21 days left
EMD
64600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Steel Furniture Including Painting Polishing At Rajouri Under Aor Of Ge 862 Ews
BOQ
| Sl. No. | Item Description |
| 1 | ALMIRAH LARGE STEEL, FD-67(M)/ 1031 |
| 2 | Removing the unserviceable door shutter carefully by unriveting the hinges, supply and fixing new door shutter made of 1 mm thick MS sheet of same size and shape duly fixed to almirah large steel with new 80mm long MS hinge, complete all as specified and directed and shown on drawing. |
| 3 | Removing the unserviceable lock from shutters of almirah large steel, supply and fixing new 6 lever lock with duplicate keys, complete all as specified and directed also shown on drawing.Make. Locks (Godrej/ Harrison/ Link). |
| 4 | Removing the unserviceable handle from the almirah steel large, supply and fixing new 130mm long chromium plated handle to steel shutters, complete all as specified and directed also shown on drawing |
| 5 | Removing the unserviceable/ damaged shelf carefully by removing the rivets and welding spots, supply and fixing new shelf made of 1mm thick MS sheet of same size and shape, complete all as specified and directed also shown on drawing. |
| 6 | Removing the unserviceable/ damaged bottom portion carefully by removing rivets and welding spots and supply and fixing new bottom made of 1mm thick MS sheet of same size and shape, complete all as specified and directed also shown on drawing. |
| 7 | Removing the unserviceable leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts. Supply and fixing new leg made of 1mm thick MS sheet to the existing place through welding and riveting, complete all as specified and directed also shown on drawing. |
| 8 | M&L for painting each almirah by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth, one coat of hammer tone paint as per existing shade shall be applied externally and internally to complete almirah. The painting to each article shall only be carried out by spray machine only. |
| 9 | ALMIRAH STEEL MEDIUM WITH SHELVES, FD-67(M)/ 1032 |
| 10 | Removing the unserviceable door shutter carefully by unriveting the hinges, S&F new door shutter made of 1mm thick MS sheet of same size and shape duly fixed to almirah large steel with new 80mm long MS hinge, complete all as specified and directed as shown on drawing. |
| 11 | Removing the unserviceable lock from shutters of almirah large steel, S&F new 6 lever lock with duplicate keys, complete all as specified and directed as shown on drawing.Make of Locks- Godrej/ Harrison/ Link. |
| 12 | Removing the unserviceable handle from the almirah steel large, supply and fixing new 130mm long chromium plated handle to steel shutters B16, complete all as specified and directed as shown on drawing. |
| 13 | Removing the unserviceable/ damaged shelf carefully by removing the rivets and welding spots, supply and fixing new shelf made of 1mm thick MS sheet of same size and shape, complete all as specified and directed as shown on drawing. |
| 14 | Removing the unserviceable/ damaged bottom portion carefully by removing rivets and welding spots and supply and fixing new bottom made of 1mm thick MS sheet of same size and shape, complete all as specified and directed as shown on drawing. |
| 15 | Removing the unserviceable leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts. Supply and fixing new leg made of 1mm thick MS sheet to the existing place through welding and riveting, complete all as specified and directed as shown on drawing. |
| 16 | M&L for painting each almirah by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth, one coat of hammer tone paint as per existing shade shall be applied externally and internally to complete almirah.The painting to each article shall only be carried out by spray machine only. |
| 17 | TABLE OFFICE OFFICER STEEL, FD-1003 |
| 18 | Removing the unserviceable top from officer's steel office table carefully, supply and fixing new top of size 1680mm x 870mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around duly fixed with adhesive and headless nails, complete all as specified and directed as shown on drawing. |
| 19 | Removing the existing unservicable/ rusted drawer complete from officer's steel office table, supply and fixing new drawer made of 1mm MS sheet as per size and dimension with 100mm long chrome plated handle fixed at front, complete all as specified and directed as shown on drawing. |
| 20 | Removing the unserviceable lock from drawers and shutters of table office officers steel, supply and fixing new 6 lever lock with duplicate keys, complete all as specified and directed as shown on drawing.Make of Locks:- Godrej/ Harrison/ Link |
| 21 | M&L for continous gas welding to all broken joints of table in length of 10 cm, complete all as specified and directed as shown on drawing. |
| 22 | Removing the old broken PVC shoes from the legs of table, Supply and fixing new PVC shoes of size 25mm x 25mm having metal washers fitted inside at bottom, complete all as specified and directed as shown on drawing. |
| 23 | M&L for painting each table office officer steel by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth, one coat of hammer tone paint as per existing shade shall be applied externally and internally to complete table. The painting to each article shall only be carried out by spray machine only, complete all as specified and directed as shown on drawing. |
| 24 | TABLE OFFICE CLERK STEEL, FD-84 (M)/ 1004 |
| 25 | Removing the unserviceable top from table office clerk steel carefully, supply and fixing new top of size 1200mm x 610mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails, complete all as specified and directed as shown on drawing. |
| 26 | Removing the existing unservicable/ rusted drawer complete from officer's steel office tablve, supply and fixing new drawer made of 1mm MS sheet as per size and dimension with 100mm long chrome plated handle fixed at front, complete all as specified and directed as shown on drawing. |
| 27 | Removing the unserviceable lock from drawers and shutters of clerk's office steel table, supply and fixing new 6 lever lock with duplicate keys, complete all as specified and directed as shown on drawing.Make of Locks:- Godrej/ Harrison/ Link. |
| 28 | M&L for continous gas welding to all broken joints of table in length of 10cm, complete all as specified and directed. |
| 29 | Removing the old broken PVC shoes from the legs of table, supply and fixing new PVC shoes of size 25mm x 25mm having metal washers fitted inside at bottom, complete all as specified and directed. |
| 30 | M&L for painting each table office clerk steel by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth, one coat of hammer tone paint as per existing shade shall be applied externally and internally to complete table.The painting to each article shall only be carried out by spray machine only, complete all as specified and directed. |
| 31 | TABLE STEEL 900X900X760MM, FD-1009 |
| 32 | Removing the unserviceable top from table steel carefully, supply and fixing new top of size 900mm x 900mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails, complete all as specified and directed. |
| 33 | Removing the unserviceable leg from the table steel carefully by cutting the welded ends with hand held machine and supply and fixing new leg made of MS square tube 25mm x 25mm of wall thickness 1.6mm by welding to the exact place and position, the welded surface shall also be grinded to make the spots and surface smooth, complete all as specified and directed. |
| 34 | Removing the unserviceable top rail from the table carefully by cutting the welded ends with hand held machine and supply and fix new rail made of MS square tube 25mm x 25mm of wall thickness 1.6mm by welding to the exact place and position, the welded surface shall also be grinded to make the spots and surface smooth, complete all as specified and directed. |
| 35 | S&F of new PVC shoe suitable to leg after removing the unserviceable shoe, complete all as specified and directed. |
| 36 | M&L for painting each table steel by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth, one coat of hammer tone paint as per existing shade shall be applied externally and internally to complete table, the painting to each article shall only be carried out by spray machine only, complete all as specified and directed. |
| 37 | LOCKER STEEL, FD-257/ 1029 |
| 38 | Removing the unserviceable/ damaged door shutter carefully by removing the hinges and supply and fixing new shutter made of 1mm thick MS sheet of same size and shape, complete all as specified and directed and shown on drawing. |
| 39 | Removing the unserviceable/ damaged shelf carefully by removing the rivets and welding spots and supply and fixing new shlef made of 1mm thick MS sheet of same size and shape, complete all as specified and directed and shown on drawing. |
| 40 | Removing the existing unserviceable rusted conduit pipe from the side flanges, supply and fixing new 20mm dia conduit pipe along with side flanges, complete all as specified and directed and shown on drawing. |
| 41 | Removing the unserviceable handle from the lockers steel and supply and fixing new 100mm long chromium plated steel handle of ISI marked with riveting to steel shutters, complete all as specified and directed and shown on drawing. |
| 42 | Removing the existing unserviceable hasp and staple from locker steel and supply and fixing new hasp and staple of size 75mm x 40mm of 3mm thickness with riveting to steel shutters, complete all as specified and directed and shown on drawing. |
| 43 | Removing the unserviceable leg from bottom of lockers carefully by unriveting and using hand held cutting machine without damaging the other parts. Supply and fixing new leg made of 1mm thick MS sheet to the existing place through welding and riveting, complete all as specified and directed and shown on drawing. |
| 44 | M&L for painting each locker steel by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth, one coat of hammer tone paint as per existing shade shall be applied externally and internally to complete locker. The painting to each article shall only be carried out by spray machine only, complete all as specified and directed and shown on drawing. |
| 45 | LOCKER STEEL, FD-257/ 1029 |
| 46 | M&L for painting shoe rack steel by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth, one coat of hammer tone paint as per existing shade shall be applied externally and internally to complete shoe rack. The painting to each article shall only be carried out by spray machine only, complete all as specified and directed. |
| 47 | GI Charpoy Plywood Type FD 220 |
| 48 | Removing and taking down of old unserviceabe plywood and unserviceabe broken components and tigtening the frame in original shape. Supply and fixing new plywood 12mm thick BWR phenol bounded on the charpoy duly fixed with nuts and bolts as per existing pattern, complete all as specified and directed and shown on drawing.Make:- Century/ Greenply/ Kitply/ Archid phenol bonded. |
| 49 | Removing of old damaged/ bend iron stiffeners size 900mm x 40mm x 6mm thick and S&F new stiffeners duly painted with black paint, complete all as specified and directed. |
| 50 | Removing of old damaged GI three way elbow and supply and fix GI 32mm threeway elbow ISI mark fixed as shown in drawing, complete all as specified and directed. |
| 51 | Removing old unserviceable damaged long rail and supply and fix new GI pipe medium grade 32mm dia long rail ISI mark make of GI pipe Jindal/ Surya/ Parlkash length of long rail as shown in drawing, complete all as specified and directed. |
| 52 | Obtain damaged old unserviceable long rail converted to short rail and fixed after threading both side, complete all as specified and directed and shown on drawing. |
| 53 | Removing old unserviceable damaged short rail and supply and fix new GI pipe medium grade 32mm dia ISI mark short rail make of GI pipe Jindal/ Surya/ Parlkash length of short rail, complete all as specified and directed and shown on drawing. |
| 54 | Obtain damaged old unserviceable short rail converted to legs and fixed after threading, complete all as specified and directed and shown on drawing. |
| 55 | S&F of new GI legs 32mm dia pipe ISI mark Make of GI Pipe medium grade Jindal/Surya/Parkash length of leg as shown in drawing and directed by Engr-in-Charge. |
| 56 | Removing of old unserviceable damaged checknut and supply new GI Checknut 32mm dia and fix, complete all as specified and directed and shown on drawing. |
| 57 | Charpoy Steel Hard Top Drg No FD/CWE-05/2014 |
| 58 | Replacement of existing unserviceable plywood top from charpoy steel hard top and supply and fixing plywood top by using 12mm thick 7 ply commercial BWR grade ISI mark of size 1850mm long and 850mm wide plywood shall be fixed with nuts bolts and washers, complete all as specified and directed. |
| 59 | M&L for prepartiion of old painted surface and applying one coat of black synthetic enameled paint to charpoy steel hard top including welding of broken parts duly painted, complete all as specified and directed. |
| 60 | S&F of new shoes for charpoy steel hard top as per drawing of superior quality, complete all as specified and directed. |
| 61 | CHAIR SCHOOL WITH HAND BOARD, FD/ E6/ MAP/ 05 |
| 62 | Removing the unserviceable / broken hand board of chair school with hand board and supply and fix new hand board made out of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade with 4mm teak wood edging all around the hand board, complete all as specified and directed and shown on drawing. |
| 63 | M&L for removing the unserviceable one piece PVC seat and back and supply and fix new one piece seat and back to chair school with hand board, complete all as specified and directed and shown on drawing.Make of one piece seat and back:- Nilkamal/ Supreme/ Cello/ AMKO/ Blow plast. |
| 64 | M&L for painting each chair by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth one coat of hammer tone paint as per existing shade shall be applied externally and internally to complete chair. The painting to each article shall only be carried out by spray machine only, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysAug 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender