Tender For Advertized Rate List /Bill Of Quantity For Repair/ Renovation Of District Veterinary Poly Clinic At Animal Husbandry Complex Baramulla (Under Nabard)
Tender Value
42.67 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
6 days left
EMD
85340
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Advertized Rate List /Bill Of Quantity For Repair/ Renovation Of District Veterinary Poly Clinic At Animal Husbandry Complex Baramulla (Under Nabard)
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing of old existing partition walls, Floor tiles, wall tiles deteriated counters including disposal of the unserviceable materials |
| 2 | Wooden walls |
| 3 | Almunium Doors |
| 4 | Brick Walls |
| 5 | Concrete Counters |
| 6 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete, Size of tile 600x600 mm |
| 7 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 50 mm thick with 20mm nominal size stone aggregate |
| 8 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 9 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) including making cornice at the top of pillar all carriages (65KMS lead) upto the site of work complete Job. |
| 10 | 12mm Cement plaster of mix in 1 : 4 ( 1 cement : 4 coarse sand) including all carriages with scafolding etc complete job. |
| 11 | Providing & applying cement based wall primer (ready made) of approved quality and manufacture two or more coats and preaparing of walls by way of brushing/ sand papering including all labour carraiges complete. |
| 12 | Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work |
| 13 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) including all carriages. |
| 14 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work |
| 15 | Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length including cost of required number of hold fasrs ( imported KD wood) |
| 16 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, including p/f of panelling of prelaminate Board for doors and 4mm glass panes for window panes including all almunium fittings and fixtures all complete as per direction of Engineer-in-charge.imcluding cost of priming coat and two or more coats of synthetic enamel complete job(Imported KD Wood) |
| 17 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge uding cost of priming coat and two or more coats of synthetic enamel complete job:(Imported KD Wood) |
| 18 | Providing and fixing glass panes(4mm thick) including cost of beading nails with putty and glazing clips including painting of beading to matching shade all carriage complete job |
| 19 | Labour fo repair/easing of Doors windows & ventilator frames/shutters in position including any new material required for fixing, any hardware fitting required included complete job |
| 20 | Windows/ Doors |
| 21 | Ventilators |
| 22 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. (internal work Concealed) |
| 23 | Providing and fixing PVC Pipe 100mm dia incld all fiitngs/fixtures |
| 24 | Providing and fixing PVC Pipe 75mm dia incld all fiitngs/fixtures |
| 25 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 26 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points etc of approved make conforming to IS: 8931 |
| 27 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole sink mixer pillar tap of approved quality and make, weighing not less than 1.970 kg |
| 28 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. |
| 29 | Providing and fixing 100 mm sand cast iron grating for gully trap. |
| 30 | Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 31 | Providing and fixing 15 mm nominal bore C.P. health faucet of approved make/brand(jaguar/Jhonson) with hand shower, tube and wall hook compete job |
| 32 | Providing and fixing wash basin including cost of pedestal with C.I. brackets, including 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 33 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.1. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: |
| 34 | Providing and placing on terrrace (at all floor levels) polyethene water storage tank ISI:12701 marked triple layer indicating the BIS License No with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and base support for tank (Sintex, Electroplat, Star, Lotus or equivalent having valid ISI license) |
| 35 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms. |
| 36 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing |
| 37 | Providing and Fixing of stainless steel soap case |
| 38 | Providing and fixing of water heating geysers of approved brand & quality ( Classic, Sharp,Usha)or eqviuallent) with all necessary fittings and fixtures complete Job. 50 Ltr capacity including all costs and cariages complete |
| 39 | Earth work in Trench excavation in all kinds of soil by al means over areas (exceeding 30 cm in depth, 1.5 m width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge |
| 40 | Providing & laying of dry stone soling (hand packed) with hand ramming, dressing ,watering incld. carriage of material from source to site of work complete |
| 41 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) including all carriages. |
| 42 | Supply and filling of khak bajree in 15 cm layers incld sorting ,spreading to templete ,watering ,dresssing ,ramming and consolidation to the required gradient and camber with 8-10 tonne capacity Power road roller incld. all carriages complete |
| 43 | Providing and laying Anti Skid floor tiles in footpath etc (400mmx400mm) for outdoor having weight carrying capacity of 8T laid on 20mm thick cement mortar 1:4 (1 cement:4 coarse sand) including grouting the joints with white cement and matching pigments etc. |
| 44 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:2:4 (1Cement: 2 coarse sand: 4 grade stone aggregate 20mm nominal size) including all carriages. |
| 45 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages. |
| 46 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels, Thermo-Mechanically Treated bars of grade Fe-500D or more, including all carriages. |
| 47 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm |
| 48 | Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc . including all carriages. |
| 49 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab over 0.5 sqm) including all carriages. |
| 50 | Providing and Fixing WARDROBES (60 cm deep) including 16-18mm thick Plywood All around, including Shelves and 10-12mm thick Ply for back Side Inner Area Finished With Liner, Outer Face of Shutters with Mica Finishing (1 mm), Concealed Cabinet Hinges, Cabinet Handles, Magnetic Catcher, 16-19mm thick Ply To Ply For Shutters, Hanger Rod, Drawer Locks, Mica Beading etc. of approved Brands with necessary fittings all complete as per direction of Engineer in Charge |
| 51 | roviding & fixing of 6mm(approx.) thick PVC board panelling in walls of approved quality (Green panel/ Action Tesa) with all necessary fittings including strips of 10-12mm plyboard base(if required) under panelling with cost of Nails, cornice etc of approved quality all inclusive with cost of labour, materials and carriages of all involved |
| 52 | Providing & fixing of 6mm(approx) thick PVC board panelling in ceiling of approved quality (Green panel/Action Tesa) with all necessary fittings including strips of 10-12mm plyboard base(if required) under panelling fixed over frame work of imported wood/alumunium furrings(as per requirment) with cost of Nails, cornice etc of approved |
| 53 | Providing and fixing of laminated wooden flooring MDF flooring of required thickness and approved quality over 6mm thick thermocoal with 50 mm wide skirting/door profile of approved quality green panel/action tesa incl cost of carraige complete job |
| 54 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 55 | Structural steel in single/Tubular sections including welding cutting placing in position including a coat of red oxide and two or more cots of paint on new surface including all carraiges complete job |
| 56 | Providing and fixing precoated/colour coated galvanised iron profile sheets(size, shape and pitch of corrugation as approved by Engineerin-Charge) 0.50mm+/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 an 240 mpa steel grade5-7microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns. The sheet shall be fixed using self drilling/self tapping screws of size (5.5 x55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.1. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal /vertical or curved surfaces |
| 57 | Providing and fixing of 10-12mm thick Plywood in ceiling including cost of nails/framework of Poplar wood including a priming coat and two or more coats of synthetic enamel complete job etc ccomplete job as false ceiling |
| 58 | P/F of GT Sheets Colored panelling type in soffits including cost of framework (1 1/2\\" x 1 1/2\\" of Imported KD wood) including cost of nails etc complete job |
| 59 | P/F of GT Colored Eaves Boarding 300mm wide & 0.40mm thick |
| 60 | Providing and commisioning lighting points incld wiring for lighting points in 1.5 Sq.mm PVC insulated copper wire and 2.5 Sqmm PVC insulated multi-strand copper wire for lighting sub mains,6 amp 1 way switch,2 mm thick PVC conduit/Channel with bends,junction boxes etc ,6 amp S Pole MCB ,10 amp DP MCB,2 way DB for housing MCB and hylem sheet of ISI mark and approved make with wooden box recessed in wallls with acessories incld all carriages (concelead type 12 watt) |
| 61 | Providing and commissioning heating point incld wiring for heating points in 2 .5 sq.mm PVC insulated multi-strand copper wire and 4 sq.mm PVC insulated multi-strand copper wire for heating sub-mains, 16 AMP switch socket combine,,2 mm thick PVC conduit/Channel with bends, Junction boxes etc , 10 Amp S pole MCB ,2 way DB for housing MCB and hylem sheet of ISI mark and approved make with wooden box recessed in /over wallls with acessories complete incld all carriages |
| 62 | Providing and commissioning of fan point incld wiring for lighting points in 1.5 sqmm PVC insulated multi strand copper wire,1200 mm ceiling fan /225 mm exhaust fan with ceiling roses and PVC square block ,350 watt electronic fan dimmer, 2 mm thick PVC conduit/Channel with bends, Junction boxes etc, 6 mm S pole MCB ,10 amp DP MCB , 2 way DB for housing MCB for lighting circuits and hylam sheet of ISI mark and approved make with wooden box recessed in wallls with acessories complete incld all carriage and costs of Fan and all other material involved. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender