Tender For Provision Of Acs And Underground Cabling At Certain Locs Under Age (I) Bhalra
Tender Value
14.60 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
14 days left
EMD
29200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Doda → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Acs And Underground Cabling At Certain Locs Under Age (I) Bhalra
BOQ
| Sl. No. | Item Description |
| 1 | XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 core 120 Sqmm complete all as specified and directed. |
| 2 | XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 core 95 Sqmm, fixed in repairs complete all as specified and directed. |
| 3 | XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 4 core 10 Sqmm, fixed in repairs complete all as specified and directed. |
| 4 | XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 2 core 10 Sqmm, fixed in repairs complete all as specified and directed. Note for item No. 1 to 4:1. The rate quoted by the contractor deemed to be inclusive of suitable size aluminium lugs at any required length at both ends of cable.2. Suitable size of cable chromium plated stainless steel glands etc. |
| 5 | Cutting existing road surfaces or hard standing 0.45 mtr depth and 0.3 mtr width (22 cm thick comprising bituminous topping) for laying of pipes/cables and making good to the disturbed surfaces to match with existing complete all as specified and directed. Note : Rate quoted by the contractor deemed to be inclusive of PCC 1:2:4 to be required to making good the disturbed surface to match with existing complete all as specified and directed. |
| 6 | GI tubing (light grade) with all necessary fitting laid in trenches/under road crossing, or fixed on poles/walls/under floor etc complete all as specified and as directed for the following sizes:- |
| 7 | 40 mm bore |
| 8 | 80 mm bore |
| 9 | Excavation in trenches not exc. 1.5 mtr wide and not exc. 1.50 mtr in depth for foundation etc., or for shafts, wells, cesspits, manholes, pier holes, etc., not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out any type of soft/ loose soil complete all as specified and directed. |
| 10 | Returning filling including spreading leveling watering and well ramming in layers not exc 25Cm in soft/ loose soil, complete all as specified and directed. |
| 11 | Removing excavated material in soft/ loose soil not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point, complete all as specified and directed. |
| 12 | Sand cushoning to underground cable in layers of 23cm thick ( 8 cm before laying the cable and 15 cm thick after laying the cable) in trenches including watering and consolidation, complete all as specified and directed.Note: Punned thickness shall be measured and paid. |
| 13 | Well burnt brick class B as protection to cable in cable trenches all as specified and directed |
| 14 | Earthing complete for sub station equipments with galvanized steel earth pole electrode of size 600mm x 600mm x 6.3mm thick burried directly in the ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below the ground level, connected to galvanised iron strip 25 x 4 mm by means of nuts, bolts, check nuts and washers of galvanised or steel all as specified or shown in electrical plate No. 3 of SSR-2009( Part-l), including ncessary earth work and excavation in any strata, GI pipe 40mm dia light grade for protection of galvanised iron earthing strip upto 7.5 mtrs, including concrete chamber of PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) having copping in PCC (1:3:6) Type C-1 (using 20mm graded crushed stone aggregate). Intemal surface of concrete chamber shall be plastered with 12mm thick cement mortar (1;4) and 50mm thick RCC cover in proportion (1:2:4) type B-1 (using 20mm graded crushed stone aggregate), reinforced with 8mm dia tor bar@ 80mm c/c both ways and charcol dust common salt etc.,funnel testing point, 8 mesh per liner inch, including test point , testing, complete all as specified and directed. |
| 15 | Fabricate, Supply install test and commissioning of CPRI approved Outdoor type LT panel board suitable for 440 Volt, 3 phase & Neutral, 50Hz supply, floor mounted dust, weather and vermin proof fabricated from MS angle of size 50mm x 50mm x 5mm as base frame, with 3.15 mm thick CRCA sheet load bearing members and load bearing members such as door partitions etc of thick no less than 2.0 mm thick, with gland paltes at bottom with suitable Brass chromium plated glands, with locking arrangements complete, duly powder coated with siemens grey colour after chemical treatment, including LED RYB indicators -06 Nos on incoming side and ON/OFF/TRIP indications on outgoing side of breaker, interconnections from bus bars to MCCB's with suitable size aluminium bus bars, all internal ckt / protection wiring with FRHR 1100 V grade wiring with MCB protection,including terminal adapters, spreader links on incoming and out going sides of MCCB's. Panel shall be manufacture in two compartments for two Nos incoming, two Nos change over switch and distribution for two Nos DG Set Supply as described below, complete all as specified and directed and comprising of the following:Note :- LT panel drawing shall be approved by the Engr-in-charge before procurement action. |
| 16 | Compartment No. 1 (DG Set No. 1)(a) Bus bar Aluminium - 100 A capacity- 04 Nos high conductivity, suitable for 415 V, 50 Hz supply including interconnection from incoming, and out going feeders with suitable mounting insulators, heat shrinkable colour sleeves.(b) MCCB 63 Amps,4 Pole, 50 Hz, 415 V with rupturing capacity 25 KA, fixed type -01 Main incomer for (DG Set No. 1, 30 KVA).(c) On load change over switch 63 Amps, 415 Volts - 01.(d) MCCB 25 Amps 3 pole 16 KA, fixed type- 03 Nos (Outgoing).(e) MCB SPN 20 Amps, 10 KA, 'B' Series - 4 Nos (Outgoing).(f) Digital multifuctional meter (Make : L&T), 4410 Series, Cat No. WL441010OOOO - 01 Nos |
| 17 | Compartment No. 2 (DG Set No. 2)(a) Bus bar Aluminium - 100 A capacity- 04 Nos high conductivity, suitable for 415 V, 50 Hz supply including interconnection from incoming, and out going feeders with suitable mounting insulators, heat shrinkable colour sleeves. (b) MCCB 63 Amps, 4 Pole, 50 Hz, 415 V with rupturing capacity 16 KA, fixed type -01 Main incomer for (DG Set No. 2, 30 KVA).(c) On load change over switch 63 Amps, 415 Volts -01.(d) MCCB 25 Amps 3 pole 16 KA, fixed type- 03 Nos (Outgoing).(e) MCB SPN 20 Amps, 10 KA, 'B' Series - 04 Nos (Outgoing).(f) Digital multifuctional meter (Make : L&T), 4410 Series, Cat No. WL441010OOOO - 01 Nos. |
| 18 | Bus bar Panel, Size:0.8x0.4x0.4 Mtr, Kisok outdoor type, CPRI type tested, LT 440 Volts, 50 Hz , 3 Phase 4 wire supply , floor mounted factory fabricated dust, weather and vermin proof protection class IP 54 made out of 1.4 mm thick MS Sheet CRCA on angle iron 30X30X4mm frame of size suitable to incorporate following accessories with front opening doors, locking arrangement powder coated internally and externally, shall have channel base of appropriate size and mounted on PCC foundation of size as required or approved by manufacturers in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) including earth work complete comprising of Bus bar chamber comprising 4 Nos Aluminium strip bus bars PVC insulated made of aluminium strip of size suitable for 200A current. PVC sheathed with colour coding complete all as specified and directed. |
| 19 | Plain Cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 20 | Hi wall split type Air Conditioner units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating of capacity 2 Ton with copper condensor. |
| 21 | Voltage stabilizer copper wound, 4 KVA for automatic operation , single phase naturally air cool indoor type & designed for input variation 130 Volt to 300 volt with output stabilised 230 volt accuracy of + 2.5% complete all as pecified and directed. |
| 22 | Copper tubing 1/4 inch + 5/8 inch pair pre insulated suitable for 2.0 ton split AC unit complete with jointing the copper tubing with the existing tubing of split AC complete all as specified and directed. |
| 23 | Cross arms made out of mild steel channel or angle section of reqd size and shape including clamp back plate with bolts, nuts, washers drilled for insulator bolts, welding, binding cold or hot in any shape or size as directed and painted with two coats of aluminum paint over a coat of red oxide primer after necessary preparation of surfaces complete all as specified and directed. (For OUTDOOR unit Stand) |
| 24 | Point wiring surface type with casing and caping using PVC insulated and unsheathed cable 2.5 Sqmm (nominal area) multistranded copper conductor 1100 Volts FRLS grade single core including PVC casing and caping medium grade of appropriate size (not less than 20 mm width) ISI marked on any surface or inside false ceiling with PVC conduit ISI marked not less than 20 mm dia complete with all accessories and all as specified including 2.5 sq mm PVC insulated unsheather multistranded copper conductor to common earth and connected to earth dolly for following :- Note : 1. The cutting chases shall be finished with cement mortar (1:4) and surface shall be matched with existing surface by using putty, POP etc and applying finishing coat of existing treatment without any extra cost.2. Rate quoted by the contractor deemed to be included metal flush box of suitable size as required at site and 3 mm thick laminated sheet suitable for mounting of switch and socket etc . |
| 25 | Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20-32 Amps complete all as specified and directed. |
| 26 | MCB DB double door SPN 2 Way with 200 Amps rated copper bus bar complete all as specified and directed. |
| 27 | MCB SPN 32 Amps, 10 KA, 'C' Series complete all as specified and directed. |
| 28 | 1100 volt grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire one twin core 10 Sqmm solid conductor all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender