Tender For Repair To Certain Wooden Furniture Works Under Ge (I) Talbehat
Tender Value
9.99 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
1 days left
EMD
19980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lalitpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Certain Wooden Furniture Works Under Ge (I) Talbehat
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L REPAIR/REPLACEMENT OF FOLLOWING PARTS SIDE BOARD (FD-371) |
| 2 | Replacement of unserviceable door of side board with 19 mm thick veneered particle board duly covered with plastic laminated sheet 0.50 mm thick natural teak matching to the existing shade, size as reqd as per drg. Fixing and finishing shall be done in accordance with drg. |
| 3 | Replacement of unserviceable hinges with continuous piano type stainless steel hinges as approved as reqd size as per drg. The fixing shall be done in accordance with drg. |
| 4 | Replacement of unserviceable drawer with new drawer materials and sizes reqd as per drg. |
| 5 | Replacement of unserviceable knobs with aluminum anadised dark brown knobs as reqd size as per drg. The fixing shall be done in accordance with drg. |
| 6 | Replacement of unserviceable side portion of side board frame with 19 mm thick veneered particle board duly covered with plastic laminated sheet 1 mm thick matching to the existing shade. Size reqd as per drg. The fixing and finishing shall be done in accordance with drg. |
| 7 | All as per item No 1.05 above but top partition of side board. |
| 8 | Replacement of unserviceable back side ply of side board with 6 mm thick ply. Size reqd as per drg. The fixing and finishing shall be done in accordance with drg. |
| 9 | Replacement of unserviceable side board shelves with 19 mm thick veneered particle board as reqd size as per drg. The fixing and finishing shall be done in accordance with drg. |
| 10 | Cleaning all the exposed wooden/ply surfaces thoroughly by using abrasive cloth various size reqd as per trade practice and apply polish in a glossy finished shade as directed. |
| 11 | M&L FOR REPAIR/REPLACEMENT OF FOLLOWING PARTS OF HAT STAND (FD-361 & MAP) |
| 12 | Replacement of unserviceable back side ply of hat stand with 6 mm thick ply wood size as reqd as per drg including provn of 2 Nos key holes as shown or in drg. All fixing shall be done as per drg. |
| 13 | Replacement of unserviceable teak face ply with wood one side teak faced 4 mm thick size as reqd as per drg. Fixing shall be done as per drg. |
| 14 | Replacement of unserviceable mirror with mirror 5 mm thick of approved make size as reqd as per drg. (inch provn of mirror side beading). |
| 15 | Replacement of unserviceable pegs with aluminum anodized pegs as approved size as reqd as per drg. The fixing and finishing shall be done in accordance with drg. |
| 16 | Replacement of unserviceable beading all-round the Hat stand with 1st class H/wood Teak size reqd as per drg Fixing shall be done as per drg. |
| 17 | Cleaning all the exposed wooden/teak faced plywood surfaces thoroughly by using. Abrasive cloth amery and putty as reqd as per trade practice and apply polish in a glossy finished shade as directed. |
| 18 | M&L FOR REPLACEMENT OF FOLLOWING PARTS OF THE TABLE WRITING (FD-275) |
| 19 | Replacement of unserviceable table top with 19 mm thick pre-laminated particle board exterior grade type-I grade II confirming to ISI specification as reqd size as per drg including provision of 4mm thick teak wood beading around the table top. The fixing and finishing shall be done in accordance with standard workmanship and drg. |
| 20 | Replacement of unserviceable legs with 1st class Hard wood teak grade-I as reqd size as per drg. The fixing and finishing shall be done in accordance |
| 21 | All as per item No 3.02 above but top frame long rail |
| 22 | All as per item No 3.02above but top frame short rail |
| 23 | Replacement of unserviceable back /side ply of table writing with 6 mm ply. size reqd as per drg. The fixing and finishing shall be done in accordance with standard drg. |
| 24 | Replacement of unserviceable knob with aluminum anodized dark brown knob as reqd size as per drg. The fixing shall be done in accordance with drg. |
| 25 | Replacement of unserviceable drawer with the materials and sizes as specified in the drg complete with knob. The fixing and finishing shall be done in accordance with standard workmanship. |
| 26 | Cleaning of old/new wooden surfaces thoroughly by using abrasive cloth amery various sizes and putty as reqd as per trade practice and apply good quality of polish as approved in all exposed wooden surfaces upto the glossy finish shade as directed by Engr-in-Charge |
| 27 | M&L FOR REPLACEMENT OF FOLLOWING PARTS OF THE PEG TABLE (FD-384) |
| 28 | All as per item No 3.01 above but for peg table. The fixing and finishing shall be done in accordance with standard workmanship and drg. |
| 29 | Replacement of unserviceable legs with 1st class H/wood teak grade I reqd sizes as per drg The fixing shall be done in accordance with standard workmanship/drg. |
| 30 | All as per item No 5.02above but top rail long side. |
| 31 | All as per item No 5.02above but leg stiffener. |
| 32 | Replacement of unserviceable rubber rings with hard rubber rings as approved. The fixing shall be done as per drg |
| 33 | All as per item No 3.08 above but for peg table. |
| 34 | M&L FOR REPLACEMENT OF FOLLOWING PARTS OF THE TEAPOY (FD-382) |
| 35 | All as per item No 3.01 above but for Teapoy. The fixing and finishing shall be done in accordance with standard workmanship and drg. |
| 36 | Replacement of unserviceable legs with 1st class H/wood, teak wood grade-I as reqd sizes as per drg. The fixing and finishing shall be done in accordance with standard Workmanship/drg as directed. |
| 37 | All as per item No 6.02 above but top rail long side. |
| 38 | All as per item No 6.02 above but short rail |
| 39 | Replacement of unserviceable rubber rings with hard rubber rings as approved. The fixing shall be done in accordance with drg. |
| 40 | All as per item No 3.08 above but for Teapoy. |
| 41 | M&L FOR REPLACEMENT OF FOLLOWING PARTS OF THE TABLE DINING 6 PERSON (FD-273) |
| 42 | All as per item No 3.01 above but for Table dining 6 person. The fixing and finishing shall be done in accordance with standard workmanship and drg. |
| 43 | Replacement of unserviceable legs with 1st class H/wood, teak wood grade-I as reqd sizes as per drg. The fixing and finishing shall be done in accordance with standard Workmanship and drg. |
| 44 | All as per item no 7.02 but long rail. |
| 45 | All as per item No 7.02 above but short rail. |
| 46 | Replacement of unserviceable rubber rings with hard rubber rings as approved. The fixing shall be done in accordance with drg |
| 47 | All as per item No 3.08 above but for Table dining 6 person. |
| 48 | M&L FOR REPLACEMENT OF FOLLOWING PARTS OF TABLE DINING 8 PERSON (FD-273) |
| 49 | All as per item No 3.01 above but for Table dining 8 person. The fixing and finishing shall be done in accordance with standard workmanship and drg. |
| 50 | Replacement of unserviceable legs with 1st class H/wood, teak wood grade-I as reqd sizes as per drg. The fixing and finishing shall be done in accordance with standard Workmanship and drg. |
| 51 | All as per item no 8.02 but long rail. |
| 52 | All as per item No 8.02above but short rail. |
| 53 | Replacement of unserviceable rubber rings with hard rubber rings as approved. The fixing shall be done in accordance with drg. |
| 54 | All as per item No 3.08 above but table dining 8 person. |
| 55 | M&L FOR REPLACEMENT OF FOLLOWING PARTS OF TABLE 900X600 W/DRAWER (FD-283) |
| 56 | All as per item No 3.01 above but for Table 900x600mm. The fixing and finishing shall be done in accordance with standard workmanship and drg. |
| 57 | Replacement of unserviceable legs with 1st class H/wood, teak wood grade-I as reqd sizes as per drg. The fixing and finishing shall be done in accordance with standard Workmanship. |
| 58 | All as per item No 9.02 above but top rail long side |
| 59 | All as per item No 9.02 above but top rail short side. |
| 60 | All as per item No 9.02 above but stiffener long side. |
| 61 | All as per item No 9.02 above but stiffener short side. |
| 62 | Replacement of unserviceable drawers with the materials as specified in drg as reqd sizes as per drg complete with knob. The fixing and finishing shall be done in accordance with standard Workmanship and drg. |
| 63 | Replacement of unserviceable rubber rings with hard rubber rings as approved. The fixing shall be done in accordance with drg. |
| 64 | All as per item No 3.08 above but table 900x600 w/drawer. |
| 65 | M&L FOR REPLACEMENT OF FOLLOWING PARTS OF TABLE 900X600 W/O DRAWER (FD-55) |
| 66 | All as per item No 3.01 above but for Table 900x600mm w/o drawer. The fixing and finishing shall be done in accordance with standard workmanship and drg. |
| 67 | Replacement of unserviceable legs with 1st class H/wood, teak wood grade-I as reqd sizes as per drg. The fixing and finishing shall be done in accordance with standard Workmanship and drg. |
| 68 | All as per item No 10.02 above but top rail long side. |
| 69 | All as per item No 10.02above but top rail short side. |
| 70 | All as per item No 10.02 above but stiffener short side. |
| 71 | All as per item No 10.02 above but stiffener long side. |
| 72 | Replacement of unserviceable rubber rings with hard rubber rings as approved. The fixing shall be done in accordance with drg. |
| 73 | All as per item No 3.08above but table 900x600 w/o drawer. |
| 74 | M&L FOR REPLACEMENT OF FOLLOWING PARTS OF TABLE 900x900x760 MM (FD-233) |
| 75 | All as per item No 3.01 above but for Table 900x900mm . The fixing and finishing shall be done in accordance with standard workmanship and drg. |
| 76 | Replacement of unserviceable legs with 1st class H/wood, teak wood grade-I as reqd sizes as per drg. The fixing and finishing shall be done in accordance with standard Workmanship and drg. |
| 77 | All as per item no 10.00 above but top rails. |
| 78 | Replacement of unserviceable rubber rings with hard rubber rings as approved. The fixing shall be done in accordance with drg. |
| 79 | All as per item No 3.08 above but table 900x900 mm |
| 80 | M&L FOR REPAIR/REPLACEMENT OF FOLLOWING PARTS OF BOOK CASE WOODEN (FD-355) |
| 81 | Replacement of unserviceable door with 19-20 mm thick particle board commercial type with MS Hinges 75mm, chapka kunda, alluminium handle complete all as specified on drg and As directed by En-in-charge |
| 82 | Replacement of unserviceable back ply wood of book case wooden with 6mm Ply wood and fixing and finishing shall be done in accordance with drg. |
| 83 | All as per item No 3.08 above but Book Case wooden. |
| 84 | M&L FOR REPLACEMENT OF FOLLOWING PARTS OF BED PLYWOOD TOP (FD-247) |
| 85 | Taking out of unserviceable plywood both sides of headrest and replacement with 4 mm thick plywood (one side teak face), BWR, ISI Marked, as per Drg, 12 mm thick half cut teak wood beading, rset all as specified and shown on drg. |
| 86 | do- all as per item No 12.00 but for foot rest of Bed plywood top. |
| 87 | Replacement of unserviceable leg of head rest side of bed plywood with Ist class H/wood teak leg according to all as specified in drg. |
| 88 | - do- as in item 12.00 here in before but leg of foot rest side. |
| 89 | Replacements of old unserviceable plywood to of bed plywood top with 12 mm thick ply, BWR (Century/Green Ply/Kit Ply), ISI Marked, rest all as specified and shown on drg. |
| 90 | Replacement of old unserviceable long rail of bed ply wood top made out of 1st class hard wood suitable size and thickness as directed, rest all as specified and shown on drg. |
| 91 | Cleaning the old/new all wooden/plywood all exposed wooden surfaces of bed ply wood top by using different type of abrasive cloth/emery paper and putty as reqd, preparing surfaces and apply French polish up to the glossy finish, shade as directed, rest all as specified and shown on drg. |
| 92 | M&L FOR REPLACEMENT OF FOLLOWING PARTS OF TABLE BED SIDE (FD-276 & Similar pattern) |
| 93 | Replacement of unserviceable back side table ply with 4 mm thick ply as approved as reqd sizes as per drg. The fixing and finishing shall be done in accordance with standard Workmanship and drg. |
| 94 | Replacement of unserviceable legs with 1st class H/wood, teak wood grade-I as reqd sizes as per drg. The fixing and finishing shall be done in accordance with standard Workmanship and drg. |
| 95 | All as per item No 3.08 above but Table bed side. |
| 96 | M&L FOR REPLACEMENT OF FOLLOWING PARTS OF THE TABLE CENTRE (FD-274) |
| 97 | All as per item No 3.01 above but for Table Center. The fixing and finishing shall be done in accordance with standard workmanship and drg. |
| 98 | Replacement of unserviceable legs with 1st class H/wood, teak wood grade-I as reqd sizes as per drg. The fixing and finishing shall be done in accordance with standard Workmanship/drg as directed. |
| 99 | All as per item No 14.00 above but top rail long side. |
| 100 | All as per item No 14.00 above but short rail. |
| 101 | Replacement of unserviceable rubber rings with hard rubber rings as approved. The fixing shall be done in accordance with drg. |
| 102 | All as per item No 3.08 above but Table Center. |
| 103 | M&L FOR REPLACEMENT OF FOLLOWING PARTS OF BIN SOLIN LINEN (FD-244) |
| 104 | Removing the unserviceable plastic cane from the Bin solid linen, cleaning the holes and all the wooden surfaces thoroughly by using abrasive cloth emery and putty reqd as per practice and apply good quality of polish as approved in a glossy finished shade toall approved wodden surface as directed |
| 105 | Recanning the Bin solid lien with plastic cane 2 mm wide white half round approved quality. The canning shall be done as per the Godrej pattern. |
| 106 | Replacement of unserviceable back side plywood of Bin soil Lenin with 6mm plywood, finishing And fixing shall be done in accordance with drg |
| 107 | Replacement of unserviceable top side plywood of Bin soil Lenin with 6mm plywood, finishing and fixing shall be done in accordance with drg |
| 108 | Replacement of unserviceable Front side plywood of Bin soil Lenin with 6mm plywood, finishing and fixing shall be done in accordance with drg |
| 109 | M&L FOR REPLACEMENT OF FOLLOWING PARTS OF COUCH 3 SITER (DB-4054) |
| 110 | Replacement of unserviceable rear/front leg with 1st class H/wood trek Grade-I as reqd as per drg. Fixing and finishing shall be done in accordance with standards workmanship and drg. |
| 111 | Replacement of unserviceable arms rest with 1st class H/wood teak Grade-I as reqd as per drg. Fixing and finishing shall be done in accordance with standard workmanship and drg. |
| 112 | Tightening the wooden seat and back frame with the support of bamboo pins & Fevicol as per trade practice or as directed and recaning the chair with plastic cane white half round approved quality 2 mm wide for caning and 3 mm wide for edging. The caning shall be done as per the Godrej pattern. |
| 113 | All as per item No 3.08 above but Couch 3 seater. |
| 114 | M&L FOR REPLACEMENT OF FOLLOWING PARTS OF SOFA SET 5/4 SEATS(a) SOFA THREE SEATER |
| 115 | Cleaning all the wooden and ply surfaces thoroughly by using abrasive cloth emery and putty as required as per trade practice and apply good quality of French polish of (approved quality) in a glossy finished shade in all exposed wooden surfaces as directed by the Engineer-in-charge |
| 116 | Replacement of unserviceable/un-hygienic components of seat & back of sofa 3 seater, cushion, foam, tapestry by providing with new approved material. Seat cushion shall be 32 density, 100 mm thick (make sleepwell). Size as reqd as per drg. The back rest cushion foam shall be 100mm thick 32 density make (sleep well) . The cost of the tapestry should not be less than 250/- per meter, stitching, fixing and finishing shall be done in accordance with drg complete all as directed. |
| 117 | Replacement of unserviceable /un-hygienic Tapestry & markin cloth with of best quality Tapestry cloth. The cost of tapestry should not be less than 250/- per meter. The fixing and finishing shall be done in accordance with standard workmanship and drg as directed by Engineer-in-Charge. |
| 118 | (b) SINGLE SEATER |
| 119 | Replacement of unserviceable arm rest of sofa chair with Ist class h/wood teak. |
| 120 | All as per item No 17.01 here in before but single seater. |
| 121 | All as per item No 17.02 here in before but single seater. |
| 122 | All as per item No 17.03 here in before but single seater. |
| 123 | M&L REPLACEMENT OF FOLLOWING PARTS OF CHAIR DINING (FD-279) |
| 124 | Replacement of unserviceable rear legs of chair dining with 1st class H/wood, teak wood grade I as reqd as per drg. Fixing and finishing shall be done in accordance with standard workmanship and drg. |
| 125 | All as per item No 18.01 above but front leg. |
| 126 | Replacement of unserviceable side rails dining with 1st class H/wood, teak grade I as reqd size with provision of 3 mm holes for canning @ 12.5 C/C. Fixing and finishing shall be done in ccordance with standard workmanship and drg. |
| 127 | All as per item No 18.03 above but front rail/rear rail. |
| 128 | Replacement of unserviceable stiffener with 1st class H/wood, teak Wood grade I of reqd size. Fixing and finishing shall be done in accordance With standard workmanship and drg. |
| 129 | Replacement of unserviceable back stiffener with 1st class H/wood, teak Wood grade I as reqd size. Fixing and finishing shall be done in accordance With standard workmanship and drg. |
| 130 | Replacement of unserviceable rubber rings with hard rubber rings as approved. The fixing shall be done in accordance with drg. |
| 131 | Cleaning the old and new wooden surfaces of chair dining thoroughly cleaning by using different type of abrasive cloth emery and putty as reqd as per trade practice and apply good quality polish as approved in all exposed wooden surfaces upto the glossy finish shade as directed by the Engineer-in-Charge. |
| 132 | Tightening the wooden frame with the support of bamboo pina & fevicol as per trade practice or as directed and recaning the chair with plastic cane white half round apporved quality 2mm wide caning and 3mm wide for edging. The caning shall be done as per the Godrej pattern. |
| 133 | M&L FOR REPLACEMENT OF FOLLOWING PARTS OF CHAIR WOODEN BOTTOM (FD-285) |
| 134 | All as per item No 18.01 above but chair wooden bottom. |
| 135 | All as per item No 18.02 above but chair wooden bottom. |
| 136 | Replacement of unserviceable side rails with 1st class H/wood teak grade-I as reqd size as per drg with provn of 6 mm groove for fixing seat. Fixing and finishing shall be done in accordance with standards workmanship and drg. |
| 137 | All as per item No 18.03 above but front rail/rear rail. |
| 138 | All as per item No 18.06 above but for chair wooden bottom. |
| 139 | Replacement of unserviceable stiffener with 1st class H/wood teak Grade-I as reqd size as per drg. Fixing and finishing shall be done in accordance with drg. |
| 140 | Tightening the wooden frame with the support of bamboo pina and fevicol as per trade practice as directed and replacement of unserviceable ply wood seat with ply 6 mm BWR grade confirming to ISI as approved to be used. The fixing and finishing shall be done in accordance with drg. |
| 141 | Replacement of unserviceable rubber with hard rubber rings as approved. The fixing and finishing shall be done in accordance with drg. |
| 142 | All as per item No 3.08 above but chair wooden bottom. |
| 143 | M&L FOR REPLACEMENT OF FOLLOWING PARTS OF CHAIR WRITING (FD-280) |
| 144 | Replacement of unserviceable rear leg with 1st class H/wood teak grade-I as reqd size as per drg. Fixing and finishing shall be done in accordance with standards workmanship and drg. |
| 145 | All as per item No 20.00 above but front leg. |
| 146 | Replacement of unserviceable side rail with 1st class H/wood teak grade-I as reqd size as per drg with provn of 3 mm holes for canning @ 12.5 C/C. Fixing and finishing shall be done in accordance with standards workmanship and drg. |
| 147 | All as per item No 20.00 above but front rail/rear rail |
| 148 | Replacement of unserviceable stiffener with 1st class H/wood teak Grade-I as reqd size as per drg. Fixing and finishing shall be done in accordance with drg. |
| 149 | Replacement of unserviceable back stiffener with 1st class H/wood teak Grade-I as reqd size as per drg. Fixing and finishing shall be done in accordance with drg. |
| 150 | Replacement of unserviceable arms rest with 1st class H/wood teak Grade-I as reqd size as per drg. Fixing and finishing shall be done in accordance with drg. |
| 151 | Replacement of unserviceable rubber rings with hard rubber rings. Fixing and shall be done in accordance with drg |
| 152 | Tightening the wooden frame with the support of bamboo pins & Fevicol as per trade practice or as directed and recaning the chair with plastic cane white half round approved quality 2 mm wide for caning and 3 mm wide for edging. The caning shall be done as per the Godrej pattern. |
| 153 | All as per item No 3.08 above but Chair writing. |
| 154 | M&L FOR REPLACEMENT OF FOLLOWING PARTS OF CHAIR EASY (FD-229) |
| 155 | Replacement of unserviceable rear leg with 1st class H/wood trek Grade-I. As reqd as per drg. Fixing and finishing shall be done in accordance with standards workmanship and drg. |
| 156 | All as per item No 21.00 above but front leg |
| 157 | Replacement of unserviceable side rails of seat frame with 1st class H/wood, teak grade I as reqd as per drg with provision of 3 mm holes for canning @ 12.5 C/C. Fixing and finishing shall be done in accordance with standard workmanship and drg. |
| 158 | All as per item No 21.00 above but front or rear rail of seat frame |
| 159 | All as per item No 21.00 above but side rails of back rest frame. |
| 160 | Replacement of unserviceable arms rest with 1st class H/wood teak Grade-I as reqd as per drg. Fixing and finishing shall be done in accordance with standard workmanship and drg. |
| 161 | Replacement of unserviceable rubber rings with hard rubber rings as approved. The fixing and finishing shall be done in accordance with drg. |
| 162 | Tightening the wooden frame with the support of bamboo pins & Fevicol as per trade practice or as directed and recaning the chair with plastic cane white half round approved quality 2 mm wide for caning and 3 mm wide for edging. The caning shall be done as per the Godrej pattern. |
| 163 | All as per item No 3.08 above but Chair Easy. |
| 164 | M & L FOR REPLACEMENT OF FOLLOWING PARTS OF TABLE DINING ORs (FD-165 (M)/SIMILAR PATTERN ) |
| 165 | Replacement of unserviceable legs with 25mm MS square pipe 1.6mm thick required size as per drg duly painted with synthetic enamelled olive green over a coat of red oxide primer matching to the existing colour. The welding and fixing shall be done in accordance with standard workman ship/drg complete all as directed by Engr-in-Charge. |
| 166 | Replacement of unserviceable top frames long rail with 25mm MS square pipe 1.6mm thick required size as per drg duly painted with synthetic enamelled olive green over a coat of red oxide primer matching to the existing colour. The welding and fixing shall be done in accordance with standard workman ship/drg complete all as directed by Engr-in-Charge. |
| 167 | Replacement of unserviceable top frames short rail with 25mm MS square pipe 1.6mm thick required size as per drg duly painted with synthetic enamelled olive green over a coat of red oxide primer matching to the existing colour. The welding and fixing shall be done in accordance with standard workman ship/drg complete all as directed by Engr-in-Charge. |
| 168 | Replacement of unserviceable stiffener long with 25mm MS square pipe 1.6mm thick required size as per drg duly painted with synthetic enamelled olive green over a coat of red oxide primer matching to the existing colour. The welding and fixing shall be done in accordance with standard workman ship/drg complete all as directed by Engr-in-Charge. |
| 169 | Replacement of unserviceable table top with 19mm thick prelaminated particle board exterior-I, type-II to ISI specification as approved of size 1900 x 685mm, including provision of 4mm thick teak wood edging all around to the table top. The fixing and finshing shall be done in accordance with standard workmanship and drg or as directed by Engr-in-Charge |
| 170 | S&F Hard rubber toes of superior quality as specified and as directed by Engr-in-charge. |
| 171 | M&L for spot welding of broken joints 25mm to 75mm of Table Dining OR's including preparation of surface and applying two coat of Olive Green synthetic enamel paint over a coat of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 172 | Removal of existing worn out painting from inside & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer, rest all as shown on drg and as directed by Engr-in-Charge. |
| 173 | Chair Verandah |
| 174 | Removal of unserviceable cane from Chair Verandah scraping existing paint from frame with sand paper and M & L for painting with two coats of synthetic enamel paint white colour and M & L for recanning with white or cream ivory plastic cane 4mm wide, including replacing of hard rubber toes etc complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 175 | M&L FOR REPLACEMENT OF FOLLOWING PARTS OF TEAPOY VERANDAH (FD-255/Similar Pattern/MAP) |
| 176 | Replacement of legs to Teapoy Verandah and applying two coat of synthetic enamel paint white colour over a coat of red oxide primer complete, rest all as shown on drg and as directed by Engineer-in-charge |
| 177 | Replacement of unserviceable top with 19mm thick prelaminated particle Bd exterior Grade I, type-II confirming to ISI specifications incl 6mm thick teak wood beading around the table to be provided. |
| 178 | M & L for spot welding of brocken joints 25mm to 25mm of Teapoy Verandah including preparation of surface and applying two coat of white synthetic enamel paint over a coat of red oxide primer complete, rest all as shown on drg and as directed by Engineer-in-Charge. |
| 179 | Cleaning all the steel surfaces thoroughly by using abrasive cloth amery as reqd and apply paint white synthetic enamelled to all matel surfaces, over a coat of red oxide primer & providing 4 Nos hard rubber shoesas required as approved. |
| 180 | Chair Verandah JCO/ORs |
| 181 | Removal and Replacing unserviceable Seat back and Seat bottom PVC moulded by fitting with PVC moulded Seat back and Seat bottom 4 mm thick weight not less than 1.85 Kgs & Providing length & width wise 2 Nos support 25x3 flat mm seat and back welding required as directed by Engr-in-Charge. Make-Classic/Amko |
| 182 | Cleaning all the surfaces thoroughly by using abrasive cloth amery & applying two coats of paint synthetic enamalled white and providing 4 Nos hard rubber shoes as required as directed by Engr-in-Charge. |
| 183 | M&L FOR REPLACEMENT OF FOLLOWING PARTS OF Charpoy GI Pipe |
| 184 | Removing unserviceable MDF board/Ply top from charpoy GI Pipe, tightning complete charpoy i.e loose checknuts ,elbows,Long rails and short Rails and S&F Ply wood 12mm thick commercial type, BWR Grade ISI Marked of size 1980x900mm. Ply wood shall be fixed to the GI frame using 16 Nos of GI washers of suitable size / thickness on top to maintained the plywood top in level position, nuts shall be tightned with check nuts complete all as specified & directed by Engr-in-Charge. |
| 185 | Removing unserviceable nylon newar from charpoy GI Pipe, tightning complete charpoy i.e loose checknuts ,elbows,Long rails and short Rails and S&F Ply wood 12mm thick commercial type, BWR Grade ISI Marked of size 1980x900mm and three Nos MS Flat iron of size 30mm x 5mm of required length between the long Rail on Equal distance to provide more strength to ply wood. Three Nos flat iron of size 30mm X 5mm of reqd length shall be welded between the long rails on equal distance. Ply wood shall be fixed to the GI frame using 16 Nos of GI washers of suitable size / thickness on top to maintained the plywood top in level position, nuts shall be tightned with check nuts. Stiffner shall be painted with two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified & directed by Engr-in-Charge.(DRG-FD-220) |
| 186 | S&F new long rail of size 1900 mm long made out of 32 mm bore medium grade(in replacement of old U/S long rail) GI Pipe duly threaded GI Pipe duly threaded on both ends and fixing to charpoy complete all as specified and as directed by Engineer-in-charge. Note :- The items includes threading both sides in new long rail also. |
| 187 | Fixing only short rail made out of dismantled long rail of size 814 mm long duly threaded on both ends including dismantled of old U/S short rail all as specified in drg and directed by Engr-in charge. |
| 188 | Fixing only legs made out of dismantled short rail of size 394 mm long one side threaded and other side 3mm thick MS sheet(made to shape of bottom) & providing with 2 parallel MNF clam made out of of FI of size 25mm x 3mm holding for 19mm dia conduit pipe complete as specified in drg and directed. |
| 189 | M&L for Removing old unserviceable three way elbow and supply and fixing new elbow 32 mm bore (ISI marked) to GI Pipe charpoy, complete all as specified and as directed by Engineer-in-charge. |
| 190 | Removing old unserviceable check nuts and supply and fixing new check nuts 32 mm bore 6mm thick to GI Charpoy, all as specified and as directed by Engineer-in-charge. |
| 191 | Cleaning GI Charpoy all the surfaces of thoroughly by using abrasive cloth as Per trade practice & applying synthetic enamelled two coats of paint olive green/fawn colour/as per Engr-inCharge over a coat of red oxide Primer complete all as specified and as directed by Engineer-in-charge. |
| 192 | M&L FOR REPLACEMENT OF FOLLOWING PARTS OF Chair Dining with long back (FD-357) |
| 193 | Removing of old unserviceable following parts from Chair Dining with long back supply and fix new following parts of first class hard wood (teak wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints and provided PVC hard rubber shoes as shown on drg and complete all as specified and directed. |
| 194 | Front legs (L&R) as ordered of size as per drg |
| 195 | Rear legs (L&R) as ordered of size as per drg |
| 196 | Side rail (L&R) as of size as per drg |
| 197 | Front and back rails of size as per drg |
| 198 | Stiffener bottom of size as per drg |
| 199 | Back rest of size as per drg |
| 200 | Removing unserviceable regzine/cloth from seat cushion of chair dining with cushion seat & back and S & F new regzine/cloth with couhion of approved shade and quality complete all as shown on drg. as specified and directed. |
| 201 | M & L for preparation of wooden surfaces of chair dining with cushion & appliying french polising on all visual surface extarnal (as shown on drg) of any discription width and girth complete all as specified and directed. |
| 202 | Note :-Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 28, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender