Tender For Special Repair To Bldg No P-82/2 And 82/3 Of Mes At Evatt Lines Under Age(I) Lansdowne
Tender Value
13.59 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
1 days left
EMD
27186
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pauri Garhwal → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-82/2 And 82/3 Of Mes At Evatt Lines Under Age(I) Lansdowne
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of existing roof treatment i.e APP membrane including cement mortar screed, brick tiling including mud mortar or lime concrete and open up RCC roof slab including picking, sweeping cleaning with wire brush and washing down with water to remove dust, dirt to get surface free of laitance , scales, oil or any other loose material and removing unserviceable material, outside of A 1 defence land complete all as specified and directed. Note for all item of roof treatment :- (a) The work is required to be carried out at non-accessible roof for double storey . The contractor shall make arrangement of scoffolding,safety & security of workers and arrangement for approach to roof. (b) The rates quoted shall deemed to be included for these items. (c) The work will be measured only after stage passing by AGE(I). |
| 2 | M&L for 40 mm thick PCC (1:2:4) type B0 (Using 12.50 mm graded stone agg) as in padding as in roof, finished even and fair complete all as specified and directed. |
| 3 | M&L for APP modified roof treatment over existing RCC roof with the following specification -(a) applying evenly a tack coat of industrial bitumin grade 85/25 confirming to IS-702 @ 1.2 kg per Sqm including cleaning surfaces.(b) APP based polymeric membrane, 3 mm thick (minimum), weighing 3.0 Kg/Sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/sqm)laid on primed surface by torch application with minimum 100mm side lap and 150 mm end lap. The laying of membrane shall be done through an authorised applicator of manufacturer of APP membrane.(c) over the membrane provide a solar reflective bituminious aluminum paint complete all as specified and directed. |
| 4 | Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removal of rubbish out side MOD land complete all as specified and directed. |
| 5 | M&L for 25 mm thick PCC (1:2:4) type B0 (Using 12.50 mm graded stone agg) as in levelling course to floor, complete all as specified and directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises from MoD land complete all as specified and as directed. |
| 7 | M&L for glazed ceramic coloured tiles of size 250x350x7 mm/ 450x300x7 mm thick as on vertical surfaces such as skirting/dados and riser of step etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat in CM 1:4 on fair faces of brick work complete all as specified and as directed. |
| 8 | M&L for non skid, joint free, coloured ceramic tiles 7-8mm thick (Square/Rectunglar), as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in CM (1:6), area of each tiles shall be of following complete all as specified and directed :- |
| 9 | Area of each tile exc 0.11Sqm but not exc 0.18 Sqm. |
| 10 | M&L for PCC (1:5:10) Type E2 ( using 40 mm graded stone aggre-gate) as in sunken portion filling complete all as specified and directed. |
| 11 | M&L for two coat of acrylic polymer modified cementitious flexible waterproof of 1 mm with minimum elongation of 100% after base preparation by cleaning, brushing and removal of flaky materials. The coatings shall be applied at intervals and as per the manufacturer’s specifications and approved by Engineer in Charge complete all as specified and directed.Note : Ponding test :- After water proofing coating, ponding test willl be done for ponding for 48 Hrs. |
| 12 | M&L for 15mm thick protection plaster in CM (1:4) as in floor and wall with polymer modified repair mortar (SBR Latex liquid polymer as per manufactur direction ) complete all as specified and directed. Note :- (SBR) Latex liquid polymer will be measured and paid seperately.. |
| 13 | Supply only SBR Latex liquid polymer of approved make complete all as specified and directed. |
| 14 | M&L for 40mm dia GI pipe, medium grade, as in spout pipe, projecting at least 150 mm beyond outer face of wall including making hole for fixing in sunken beam or brick wall complete all as specified and as directed. |
| 15 | Supply only 32 mm bore PVC flush pipe low or high density polythene pipe for low level flushing cistern complete all as specified and as directed. |
| 16 | S&F in repair 100 mm bore cast iron floor trap with grating including jointing to waste pipe fixed in PCC (1:2:4) type B1, complete all as specified & directed. |
| 17 | Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water etc and removing unseviceable materials out side MoD land complete all as specified and as directed. |
| 18 | M&L for Rendering 15 mm thick on fair faces of brick surfaces, in CM (1:4), surface finished even and smooth without using extra cement complete all as specified and directed. |
| 19 | M&L for Rendering 15 mm thick on other than fair faces brick or concrete surfaces, in CM (1:6), surface finished even and fair complete all as specified and directed. |
| 20 | M&L for Rendering 5 mm thick on ceiling, in CM (1:3), surface finished even and smooth without using extra cement complete all as specified and directed. |
| 21 | Material & Labour preparation of newly plastered surfaces of external wall by application of 1 mm thick wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 22 | Material & Labour preparation of newly plastered surfaces of internal wall by application of 1 mm thick wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying Two coats of acrylic distemper over a coat of primer using roller complete all as specified and directed. |
| 23 | Material & Labour preparation of newly plastered surfaces of ceiling and applying Two coats of acrylic distemper over a coat ofalkali resistant primer using roller complete all as specified and directed. |
| 24 | Material & Labour preparation of old surfaces of internal wall and applying Two coats of oil emulsion distemper over putty if required make the surface even and smooth complete all as specified and directed. |
| 25 | Material & Labour preparation of old plastered surfaces of external wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over one coat of putty if required complete all as specified and directed. |
| 26 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 27 | M&L Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 28 | Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc complete all as specified and directed. |
| 29 | S&F factory made steel window or ventilators fixed type with glazing bars complete all as specified and directed. |
| 30 | S&F in repair stainless steel drapery rod 25mm dia including stainless steel brackets including fixing arrangement with drilling holes etc complete of approved quality, complete all as specified and directed. |
| 31 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or wire staples complete all as specified and as directed. |
| 32 | Dismantling of wall and ceiling boards ( fibre, pulp insulation etc.) or insulation boards/ slabs/ blankets of any thickness, including cover fillets complete all as specified and directed. |
| 33 | S&F 18 mm thick with minimum density 600 Kg/Cum LEAD FREE PVC celuka ply of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen/bed room cabinet and cupboard shutter and shelves complete all as specified and directed. |
| 34 | S&F 18 mm thick with minimum density 600 Kg/Cum LEAD FREE PVC celuka ply of single side rigid laminate of approved colour and other side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet shutter complete all as specified and directed. |
| 35 | S&F 6 mm thick with minimum density 600 Kg/Cum LEAD FREE PVC ply fixed with SS screws and solvent cement/adhesive to make wall mount kitchen cabinet back sides complete all as specified and directed. |
| 36 | S&F auto closing hinges 35 mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet & ward robe shutters complete all as specified and directed. |
| 37 | S&F D type cabinet handles premium quality stailess steel 304/ gloss chrome/SN finished 150 mm long matt finished complete all as specified and directed. |
| 38 | M&L for two coats of synthetic enamel paint including preparation of new wood or wooden base surface over 10cm width or grith complete all as specified and directed. |
| 39 | Demolition of reinforced cement concrete of any description complete all as specified and directed. |
| 40 | M&L for precast RCC (1:2:4) type B1, (using 20mm graded stone aggregates) as in cover slab (for manholes) and set in CM (1:4) including necessary fair finish formwork complete all as specified and directed. |
| 41 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 42 | M&L for PCC (1:2:4) type B-1, using 20mm graded stone aggregate as in surface channel and drain complete all as specified and directed. |
| 43 | Taking up or down steel water tubing (GI Pipe) and connections of following bore complete all as specified and as directed :- |
| 44 | 15mm bore |
| 45 | 20mm bore |
| 46 | S&F galvanised steel water tubing (GI pipe), medium grade with all fittings (ISI Marked) and fixed to wall, floor and ceiling or laid in trenches of following bore complete all as specified and as directed :- |
| 47 | 15mm bore |
| 48 | 20mm bore |
| 49 | M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, following girth complete all as specified and as directed :- |
| 50 | Cutting exc 10 cm but not exc 20cm girth. |
| 51 | S&F in repair gun metal globe or gate valves, (ISI marked), with iron wheel head, screwed both ends for iron pipe and fixed, for following bore complete all as specified and directed:- |
| 52 | 20 mm Bore |
| 53 | S&F in repair vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed. |
| 54 | S&F in repair PVC valveless, syphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia of make as approvrd by GE complete all as specified & directed. |
| 55 | S&F in repairs 15mm bore Stop valves (angular stop cock), cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 56 | S&F in repair soap dish any type (stainless steel) fixed to plug with CP brass screws of size 130x80x120 mm complete all as specified and directed. |
| 57 | S&F 15 mm bore bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed . |
| 58 | S&F in repair d health fauset, (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed. |
| 59 | S&F in repair 100 mm dia grating doom of chromium plated (Min weight 25 gm) complete all as specified and directed. |
| 60 | S&F in repairs 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated , Fancy type screwed down for pipe,high pressure , with or without lettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed. |
| 61 | S&F in repair PVC connection 15 mm size with PTMT nut of following length complete all as specified and directed :- |
| 62 | 600mm long |
| 63 | S&F in repair vitreous china wash hand basin, white, flat back, size 550mm x 400mm excluding taps, waste chain and plug and porcelain stopper but including bracket cutting for and pinning in ends of brackets, waste pipe & CP brass waste coupling of 32mm dia complete all as specified and directed.Note : Rate quoted under this item deemed included fixing of taps, plug and chain and connecting up to supply pipes, wastes or traps etc. |
| 64 | S&F in repair 5mm thick bevelled edge best quality looking mirror of size 600x450 mm with 30 mm PVC beading all around the glass, mounted over 3mm thick PVC sheet or 6mm thick AC bldg board, or commercial ply wood complete all as specified and directed. |
| 65 | S&F PVC waste coupling 32mm bore with cup and washers complete on new or old locations.complete all as specified and directed. |
| 66 | S&F PVC waste pipe 32mm bore with cup and washers complete on new or old locations.complete all as specified and directed. |
| 67 | S & F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks triple layer,white colour (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed |
| 68 | S&F in repair chromium plated tubular towel rail 20mm dia D type 60 cm long between flanges , including brackets and fixed to walls complete all as spd and directed |
| 69 | S&F in repair corner self fency type three tier with 5.50 mm thick glass mounted on cp brass frame fixed with brass screw & plug size 300- 450mm as suitable for bath room as per manufacturer instruction complete all as spd and directed |
| 70 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs , washers and waste, inlcuding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe ,overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed |
| 71 | S&F in repair stainless steel plate rack (size 900x600x250 mm) of min thickness 0.80 mm including necessary drilling fixing with screw ,plugs in kitchen etc fixed in position complete all as specified and directed . |
| 72 | S&F in repair toilet roll holder with flap, with accessories set complete all as specified and as directed. |
| 73 | S & F in repair over head shower 150x150mm square shape single flow(ABS Body chrome plated with greay face plate)with Rubit cleaning system complete all as specified and as directed. |
| 74 | S&F in repair CP brass wall mixer 15 mm dia mark hot and cold complete all as spd and directed |
| 75 | Dismantling and breaking up PVC drain pipes of following bore of pipe, set in cement mortar complete all as specified and as directed:- |
| 76 | 110mm bore |
| 77 | 75mm bore |
| 78 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints and laid in trenches or in floor of following size complete all as specified and as directed :- |
| 79 | 110 mm bore |
| 80 | 75 mm bore |
| 81 | S&F PVC (SWR) bends any radius including necessary cutting in brick wall and making good to match with existing surface of following size complete all as specified and as directed :- |
| 82 | 110 mm bore |
| 83 | 75 mm bore |
| 84 | S&F PVC (SWR) junction single, (single T) equal or unequal of following size complete all as specified and as directed :- |
| 85 | 110 mm bore |
| 86 | 75 mm bore |
| 87 | S&F PVC (SWR) vent cowl of following size complete all as specified and as directed :- |
| 88 | 110 mm bore |
| 89 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 90 | M&L for brick work with old size full brick subclass ‘B’ burnt clay bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed. |
| 91 | M&L 100 mm thick PCC (1:2:4) type B1 (Using 20 mm graded stone agg) as in hard standing/ path finished even and fair without using extra cement complete all as specified and directed. |
| 92 | M&L for spike rolling to surface or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed. |
| 93 | M&L for forming contraction (Dummy) joints 35mm deep x 10mm wide, filled with sealing compound grade 'B' complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 11, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender