Tender For Special Rep To Roof Covering Of Bldg No P-01 Of Rc Echs Under Ge Dehradun And Special Reapair To Bldg No P-62/A Of Mh Dehradun Under Ge Dehradun.
Tender Value
42.24 Lakhs
Estimated cost
Bid Submission
08 Aug 2026
7 days left
EMD
44480
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Rep To Roof Covering Of Bldg No P-01 Of Rc Echs Under Ge Dehradun And Special Reapair To Bldg No P-62/A Of Mh Dehradun Under Ge Dehradun.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Jul-2026 | Re critical dates | Date | 08-Aug-2026 |
| 2 | 27-Jul-2026 | Re Revised BOQ | BOQ | 08-Aug-2026 |
| 3 | 25-Jul-2026 | critical dates | Date | 04-Aug-2026 |
| 4 | 25-Jul-2026 | Revised BOQ | BOQ | 08-Aug-2026 |
| 5 | 25-Jul-2026 | Revised BOQ | BOQ | 04-Aug-2026 |
| 6 | 25-Jul-2026 | critical dates | Date | 04-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | Material and labour for brick work with sub class ‘B’ bricks(old size), straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:6) including demolition of brick work built in cement mortar including demolition of old brick/stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed. |
| 3 | Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed. |
| 4 | Material and labour for 15 mm thick rendering in cement mortar 1:4 on on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specifeid and directed. |
| 5 | Material and labour 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work finished even and smooth complete all as specified and directed. |
| 6 | Material and labour for 5mm thick rendering on fair faces of concrete surfaces in CM 1:3 finished rendering surfaces even and smooth (without using extra cement) complete all as specified and directed. |
| 7 | Material and labour for preparation of wall and applying interior grade wall care putty 1 mm thick to make the surface smooth as specified and directed. |
| 8 | Material and labour for preparation of wall and applying exterior grade wall care putty 1 mm thick to make the surface smooth as specified and directed. |
| 9 | Material and labour for preparation of new surface of wall and applying two coats of oil bound distemper includind and over priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed. |
| 10 | Material and labour for prepration of new plastered surface and applying two or more coats of damp proof paint over a coat of putty of exteriorr new surfaces complete all as specified and directed. |
| 11 | Material and labour for complete removal of old existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper inclding two coats of Damp Proof paint over a one coat of 1 mm thick wall putty on exterier walls etc complete all as specified and directed. |
| 12 | Material and labour for complete removal of old existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper inclding two coats of oil bound distemper over a one coat of 1 mm thick wall putty on interior walls etc complete all as specified and directed. |
| 13 | Supply and fixing of of aluminium anodised partition with frame, (fixed type) shutter, and glazing 4.8 mm thick plain glass, and 12mm thick prelaminated particle board interior grade in bottom panell, glass fixed with rubber gasket with aluminium glazing clips & snap beading including taking down unserviceable existing partion etc of following sizes;-Frame of vertical/horizontal section;- 44.5x44.5x1.22 mm thickBottuom section;-100x44.5x1.22 mm thickComplete all as specified and directed by the Engr in chargeWork will be carried out up to 5th storeyMake: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Green ply/Kit ply/ Century ply (iii) Glass: Saint gobain / Modi guard / Tata |
| 14 | Dismantling of framed or unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed |
| 15 | Supply and fixing of rolled section in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, staging for water tanks, gusset plates etc. confoRunning Metreing Fe-410W(Gde E-250) complete all as specified and as directed. |
| 16 | Material and labour PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in benching to drain, hold fast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work complete all as specified and as directed. |
| 17 | Material and labour for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection finished fair and even smooth without using extra cement complete all as specified and directed. Note:- The plinth protection shall be laid in panels and lenth of each panel shall not be more than 3.00 m and at every turning and 10mm joints filled with 85/25 grade bituman and sand mixture in the ratio (1:3) shall be provided. |
| 18 | Material and labour for two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed. |
| 19 | Material and labour for two coats of synthetic enamel paint on old steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed. |
| 20 | Dismantling of asbestos cement (corruga ted, semicorrugated, etc.) sheets in roof coverings complete all as specified |
| 21 | Supply and fixing of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to walls/chajja covering etc fixed with self tapping screws as specified |
| 22 | Supply and fixing of pre-painted galvalume aluminum zinc coating GI based crimped ridge with profile sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge , fixed with self tapping screws as specified having cap with rubber and metal washer complete all as specified and directed. |
| 23 | Supply and fixing of hollow super havey PVC sheet wall panelling of thickness 5 mm, consisting of panel having on inner frame work of 50mm wide strips of 5mm thick PVC sheet. The strip shall have in their centre a groove of 6mm width and 1mm depth of sinking the head of the screw used to fixed the strip to the wall vertically at an equal interval of 250mm between two PVC strip. The PVC strip shall be fixed to wall using 65mm long MS screw & through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panel for astheic looks, the exact size of the panel and correspondingly the grid may vary depending on size of wall, complete all as specified and directed. |
| 24 | Supply and fixing of false ceiling with everest fibre cement designer tile Ivory painted (High pressure steam cured) of 4mm thickness (as per IS: 14862) of size 595 x 595 mm and any one of the design (Ocean, lake & hill, cascade or electra ) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and 15 x 32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross \\"T\\" of size 15 x 32 mm made of 0.30 mm sheet, 1200 mm long spaced between main \\"T\\" at 600 mm c/c to foRunning Metre a grid of 1200 x 600 mm and secondary cross \\"T\\" of length 600 mm and size 15 x 32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200 x 600 mm panel to foRunning Metre grids of 600 x 600 mm and wall angle of size 15 x 20mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including, required cutting/making , opening for services like diffusers, grills, light fittings, fixture, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3 mm dia with galvanised butterfly level clips, spaced at 1200 mm c/c along centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/Square Metre, including taking down existing false ceiling etc complete all as specified and as directed. |
| 25 | Supply and fixing of false ceiling with everest fibre cement designer tile Ivory painted (High pressure steam cured) of 4mm thickness (as per IS: 14862) of size 595 x 595 mm and any one of the design (Ocean, lake & hill, cascade or electra ) in true horizontal level,on existing grid fixed match with old ceiling board with two coats of OBD on celing surface complete all as specified and as directed. |
| 26 | Supply and fixing of 3 mm thick polycarbon corrugated roof covering, ridge, cladding to wall, fixed with self tapping screws as specified having cap with rubber and metal washer complete all as specified and directed. |
| 27 | Supply and fixing of hard drawn steel wire weight n exc 4 Kg/Square Metre fabric cut to length, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9 mm dia supplied and fixed in reinforcement complete all as spcified and directed. Please Enable Macros to View BoQ information |
| 28 | Supply and fixing of hard drawn steel wire weight n exc 4 Kg/Square Metre fabric cut to length, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9 mm dia supplied and fixed in reinforcement complete all as spcified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 08, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 days
Aug 08, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 days
Aug 04, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 days
Aug 08, 2026
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 days
Aug 04, 2026
18:00 IST
Corrigendum-5 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 days
Aug 04, 2026
18:00 IST
Corrigendum-6 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysAug 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender