Tender For Addition/ Alteration To Building No P-01 At Cgae Kochi. 8332/E8
Tender Value
41 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
17 days left
EMD
82000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/ Alteration To Building No P-01 At Cgae Kochi. 8332/E8
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, stone, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed . |
| 2 | M&L for 25 mm thick PCC 1:2:4 Type B0 (12.5 mm Graded Stone Aggregate) as in sub floor etc., including rough top surface to receive floor finish complete all as specified and directed. |
| 3 | M&L for non-skid coloured ceramic tiles of any shade any pattern of size (pattern consist of combination of two or more colour 7 to 8 -10 mm (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.Note: No extra cost shall be allowed for removing and refixing joinery and cutting of doors etc, any required during execution work |
| 4 | Material and Labour for glossy finish coloured Vitrified tiles 8-10 mm thick of area of each tiles not exceeding 0.42 Sqm but not exceeding 1.0 Sqm, of any shade of any pattern (pattern consists combination of two or more tiles ) as in vertical surfaces etc jointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 10 mm thick screed bed in CM 1:4 and pointed in coloured cement to match coloured tiles complete all as specified and directed. |
| 5 | Material and Labour for Vitrified ceramic tiles 8-10 mm thick dark shade/ double charged/ ultracharged area of each tiles not exceeding 0.42 Sqm but not exceeding 1.0 Sqm, of any shade and any pattern (pattern consists combination of two or more tiles ) as in floor etc jointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 15 mm thick screed bed in CM 1:6 and pointed in coloured cement to match coloured tiles complete all as specified and directed.Note: No extra cost sahll be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work. |
| 6 | S & F for 10 mm thick Vitrified light shade coloured tiles, square/rectangular double polished, area of each tile n.exc. 0.36 Sqm, in floor including 15 mm thick screed bed in CM 1:4 etc.,set and jointed in neat cement slurry and pointed in white with pigment to match for laying floor finishes all as specified and directed . |
| 7 | M&L for 8 to 10 mm thick ceramic joint free Coloured Tiles, of size 600 x 100/ 150 mm, on vertical surface/Skirting over and including 10 mm thick rencering in CM 1:4 Laid and Jointed in neat cement slurry and pointed in white cement with pigment to match the shade of the Tiles, complete all as specified and directed. |
| 8 | M&L for 18 to 20 mm granite slab of any size for counter top and similar work over and including 15 mm thick screed bed or bedding layer of cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including making good the edges complete all as specified and directed . |
| 9 | M&L for cut kota stone slab flooring 20-25 mm thick over cement screed bed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone slab including rubbing and polishing over 20 mm thick screed bed CM 1:4 complete all as specified and directed |
| 10 | Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc.complete all as specified and directed |
| 11 | M&L for precast cement concrete hollow solid blocks exc 10 cm width masonry type 1:3:6 (16 mm using aggregate as per IS 383) set in cement mortar 1:6 all as specified and directed |
| 12 | M&L for precast cement concrete solid building blocks or slabs 10 mm thick type C1, 1:3:6 (20 mm aggregate) in walls set in cement mortar 1:6 all as specified and directed . |
| 13 | M&L for HCRM TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified |
| 14 | M&L TMT bars 5 mm and over upto and incl 10 mm dia in stirrups, spacers and binders cut to length bent to shape required including bending, hooking binding with and incuding MS wire not less than 0.9 mm dia complete al as specified and directed |
| 15 | M& L for use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. flat and rough finished surface of concrete all as specified and directed. |
| 16 | M&L for RCC 1:2:4 type B1 using 20 mm graded aggregate as in concrete for slab supported walls, landing ,canopies and shalfs all as specified and directed . |
| 17 | Taking down cement plaster alongwith tiles on brick or stone wall surfaces including raking out joints, hacking for key and scrubbing down with water complete all as specified and directed. |
| 18 | M&L for rendering 15 mm thick in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement on any height complete all as specified and directed . |
| 19 | M&L for rendering 15 mm thick in cement mortar 1:4 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement on any height complete all as specified and directed. |
| 20 | M&L for rendering 10 mm thick in cement mortar 1:3 on other than fare face of brick work or concrete ceiling surfaces and finishing the surface even & smooth without using extra cement on any height complete all as specified and directed. |
| 21 | M&L for applying two coat of Distemper oil emulsion by Auto Roller over a coat of primer over 2 to 3 mm thick birla putty punning including finishing by sanding machine and auto roller on new plastered surface of wall complete all as specified and directed. |
| 22 | M&L for applying two coat of Distemper oil emulsion by Auto Roller on over a coat of primer over 2 to 3 mm thick Birla putty punning including finishing by Sanding Machine and Auto Roller new plaster surface of ceiling complete all as specified and directed. |
| 23 | M&L for preparing old distemper and painted surfaces of walls including washing rubbing down and brooming down smoke soot mould mass and applying one coats of Oil emulsion distemper old surface complete all as specified and directed . |
| 24 | M&L for preparing old distemper and painted surfaces of ceiling including washing rubbing down and brooming down smoke soot mould mass and applying one coats of Oil emulsion distemper old surface complete all as specified and directed. |
| 25 | M&L for applying two coat of exterior Acrylic emulsion paint (100% acrylic) of approved colour and shade over a coat of primer and over 1 to 2 mm thick birla putty punning including preparation of new plastered surface complete all as specified and as directed including necessary scaffolding . |
| 26 | M&L for preparing old external plaster surface of walls including washing rubbing down and brooming down mould mass and applying one coat of exterior Acrylic emulsion paint (100% acrylic) of approved colour and shade over a coat of primer and over 1 to 2 mm thick birla putty punning complete all as specified and as directed including necessary scaffolding upto 2th floor. |
| 27 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 Sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed. |
| 28 | Taking down chowkhats or frame with shutter of area exc 1.50 but n exc 4.0 Sqm each and removing to store complete all as specified and as directed. |
| 29 | M&L Second class hard wood plain solid straight chowkat &frame wrought rebated on solid rounded, complete all as specified and directed. |
| 30 | M&L for 2 nd class hard wood plain cover fillets square rectangular or triangular in section bull nosed spayed chamfered or rounded on one edge or face sectional area exc 06 n, exc 13 sqcm complete all as specified and directed. |
| 31 | S& F cast brass powder coated Box type decorative door handle of 100 mm long complete all as specified and directed. |
| 32 | S & F of 35 mm thick IInd class HW plain framed flush shutter board with commercial veneered on both faces.The size of rail as per IS: 1003 (part-I), kiln seasoned & chemically pressure treated all as specified. |
| 33 | S & F 35 mm thick IInd class hard wood glazed or skeleton shutters, open rebated and prepared to recieve glass, gauge etc. (without sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitred bead for securing glass etc,. Sizes of member of shutters as specified in SSR Part-I,1991, section 8, clause 8.20 (a),complete all as specified and directed. |
| 34 | S&F of 4mm thick sheet glass for window/ventilators ordinary quality and glazing with rubber beading/oil putty in square exc 0.50 Sq.m in each pane complete all as specified and as directed. |
| 35 | S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples and including dismantling of old mesh complete all s specified and directed. |
| 36 | S&F of parliement hinges cast brass bright polished and fixed complete all as specified and directed |
| 37 | S&F for colour powder coated aluminium frame for, doors ,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 38 | S&F for aluminium colour powder coated window ,ventilator of sliding shutter of sectios weighting 0.55 kg/m including necessary joining cleats glazing clips rubber packing aluminium snap beading screws anodised aluminiu fittings such as peg stays 150 mm longs 01 nos suitable handles 01 Nos complete all as specified and as directed. |
| 39 | M&L for aluminium grill (anodised transparant or dyed t required shade according to IS 1868 with minimum anodic coating coating of grade AC 15 ) approved design /pattern, with approved standarard section and fixed to existing window frame with cp brass stain less steel screw @ 200 mm centre to centre including cuttng the gril to proper opening size for fixing and operation of handles and fixing approved standard section around the opening complete all as specified and directed. |
| 40 | S&F for powder coated aluminium (min thickness of powder coating 50 micron)work for doors and partions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make confirming to IS ;1285 fixed with dash fasteners of required dia and size ,or with fixing clips or expension hold fasteners for filling of gaps at junctions,i,e at top,bottom and sides with required EPDM rubber/neoprene gasket etc, support the frames including necessary filling up of tc aluminium sections shall be smooth rust free straight mitred and jointed mechanically whatever required including cleat angle,aluminium snap beading for glazing/panelling C.P brass / stainless steel screw, including all necessary hardware fittings partion/ doors complete all as directed. |
| 41 | S&F for 6 mm thick toughtned glass or opeque pane reuired colour and size including all necessary hardware fittings partitions,doors /windows complete all as directed. Make: Saintgobin/ Modiguard |
| 42 | S&F Solid WPC Door Frame of size 45 mm x 85 mm plain colour virgin PVC polymer of K value 58-60 in opening as per specification & drawing mentioned in SSR complete all as specified and directed. |
| 43 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 44 | S&F for 100 mm extruded brass handles, fabricated type polished |
| 45 | S&F for brass 100 mm long Butt hinges Type B-21 with galvanised mild steel screws complete all as specified and directed. |
| 46 | S&Fof brass barrel tower bolts, 100 mm long complete all as specified and directed. |
| 47 | S&Fof brass flush bolt type 2 tower bolts, 100 mm long fixed flush complete all as specified and directed. |
| 48 | S&F of aluminium die cast of door closer hydraulically regulated designed No 3 universal type suitable for door shutter size of 850 mm to 1000 mm in width weight between from 61 to 80 kg and fixed |
| 49 | S&F to decorative end Knob for curtain rod 25 mm dia fancy type as directed. |
| 50 | S&F stain less steel Decorative curtain Rod 25 mm dia with bracket and fixed in repair |
| 51 | S&F of 250 mm brass sliding door bolt with hasp, staple (Bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified and directed. |
| 52 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or grith and applying two coats of melamine finish (Approve design colour) paint over a coat of pink primer complete all as specified and directed. |
| 53 | S&F for Godrej cylindrical lock for main & internal doors 6 cm back set suitable for left /right handed &inside /out side opening with lock and three keys complete all as specified and directed. |
| 54 | S&F in repair 1000 ltrs rotational moulded polyethylene three layered water with EPI coated storage tanks (cylindrical vertical with closed top) hoisted and fixed with all necessary fittings i in position including taking down existing water tank of 500 to 1000 ltrs or removing of existing RCC old tank complete all as specified and directed. |
| 55 | S&F 25 mm dia bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 56 | Taking up or down existing steel tubing/PPR pipe of any grade of 15 mm dia bore and connections including making good the disturbed surfaces complete all as specified and directed. |
| 57 | All as per item no.56 here-in-before but for 20 mm dia bore. |
| 58 | S&F for 20 mm dia CPVC SDR 11 pipe fixed to concealed/wall, ceilling, laid in floor etc incl all fittings with solvant anf brass threaded fittings for fixing taps and connections, including water tighteness test etc., complete all as specified and as directed. |
| 59 | S&F for 25 mm dia CPVC SDR 11 pipe fixed to concealed/ wall, ceilling, laid in floor etc incl all fittings with solvant and brass threaded fittings for fixing taps and connections, etc., including water tightness test complete all as specified and as directed. |
| 60 | S&F of 15 mm dia bore CP Bib cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union and fixed complete all as specified and directed. |
| 61 | S&F of 15 mm dia bore CP two in one bib cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union and fixed complete all as specified and directed. |
| 62 | S&F of 15 mm dia bore stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union and fixed complete all as specified and directed. |
| 63 | S&F of bevalled frameless wall mounted mirror colour of silver B fixed with wall bolting arrangement of size 600 x 1500 mm of good finish complete all as specified and directed. |
| 64 | S&F of PVC connection 15 mm dia and 450 mm long with both end brass fly nut complete all as specified and directed. |
| 65 | Supply and fix in repair 15 mm dia bore pillar taps swan neck cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or “cold’ with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 66 | S&F in repair 32 mm bore of pipe low density (LDPE) of pressure rating 6 Kg per Sqcm fixed to wall or floor etc including fittings complete all as specified and directed. |
| 67 | M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and as directed. |
| 68 | S&F of stain less steel towel rail of 20 mm dia D type, 60 cm long between flanges complete all as specified and directed. |
| 69 | S&F in repair 100 mm dia cast iron floor trap with grating including jointing to waste pipe in run lead fixed in concrete type B1 1:2:4 complete all as specified and directed |
| 70 | S&F for glass shelf assembly consist of 5.5 mm thick sheet glass shelf 12 cm wide with cromium plated bracket guard and railing 60 cm fixed with screws and making good surface of wall complete all as specified and directed. |
| 71 | S&F for 125 mm fancy type shower rose brass chromium plated with CP arms for 15 mm bore GI pipe complete all as specified and directed. |
| 72 | S&F for brass chromium plated bottle trap of 32 mm bore for wash hand basin with inlet and outlet and screwed for pipe or fixed complete all as specified and directed. |
| 73 | Supply only 32 mm dia waste fitting brass chromium plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 74 | S&F for CP Health Faucet, (CP body) mild syteel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position of any description, complete as all specified and directed. |
| 75 | S&F for Soap Dish, Single, as approved, fixing with Brass Chromium Plated Screws including taking down unserviceable Soap Dish of any description, complete as all specified and directed. |
| 76 | Supply and fix vitreous china premium 1st quality washdown water closet wall hung single piece EWC white /ivory/off white (closed pattern including all necessary accessories with PP soft close seat cover, hinges, Dual flush cistern, fitting complete as all specified and directed. Make: Jaquar or equivalent. |
| 77 | Supply and fix table top wash hand basin with fixing acessseries size 595 x 445 x 135 mm Jaquar cat part No JDS-WHT-25931 |
| 78 | Supply and fix single lever basin mixer without pop up waste system with 450 mm long braided hoses of Jaquar cat part No VGP-81051B |
| 79 | Supply and fix Single lever 3 inlet Divertor Exposed parts kit Cat part No Jaquar ALI 85193NK Consisting of Operting lever, wall flange & button only suilatbe for ALD 193 |
| 80 | Supply and fix Conceled Body for 3 inlet Single lever diverter cat part No ALD 193 with button assembly cartridge sleeve but without or Exposed parts |
| 81 | Supply and fix brass chromium plated wall mounted handle triple lever wall mixer with crutch & 5 function for hand shower with 1.5 meter chrome flexible tube Cat part No Jaquar ATON GRC 3795 suilatbe for diverter complete all as specified and directed. |
| 82 | Supply and fix 12 mm thick toughtened glass, crystal polished in squares exceeding 0.5 Sqm in each pane as door with locking arrangemnt on pivot hanging,working table top fixed and smilar work etc,.with adhesive of high quality complete all as specified and as directed. Make:Modiguard/ Saintgobin |
| 83 | S&F for extruded brass handes of 600 mm long fabricated type (25 mm dia) polished /high glossy including all necessary fittings and fixture complete all as specified and directed. |
| 84 | Cutting for removing existing branch pices drain or pipe of 150 mm making good to walling and rendering cutting out branch channel and making good benches complete all as specified and directed. |
| 85 | Supply and fix Toilet paper Roll Holder with flat recessed type stainless steel complete all as specified and directed. Make Jaquar 1151N/ equivalent in CERA/ PARRYWARE |
| 86 | Supply and fix PVC pipe (SWR) single socketed in any length with rubber ring joint 110 mm dia fixed to wall complete all as specified and directed. |
| 87 | Supply and fix PVC (SWR) bends 110 mm with access door complete all as specified and directed. |
| 88 | Supply and fix in repairs 110 mm PVC (SWR) branch piece , single (Single Y) equal or unequal all as specified and directed. |
| 89 | Supply and fix in repairs 110 mm PVC (SWR)Junction , single T (SingleTY) equal or unequal all as specified and directed. |
| 90 | S&F liquiled soap container of PTMT fixed with including chromium plated brass screws and wooden plastic cleats (Min weight 105 gms) complete all as specified and directed |
| 91 | Supply and fix Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. Make: SANDHU, EVEREST |
| 92 | S&F for vitrous china urinal bowl type or half installed pattern ,basin size 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe and including connections to flushing pipe and out going pipes fixed to wall complete all as specified and directed. |
| 93 | Removal of debris/malwa to a distance exc 1.5 Km but n exc 5 Km and depositing out side the MD land and as directed. |
| 94 | Material & Labour for providing and fixing stainless steel (Grade 304) designed gate made of hollow tubes any size and any dia channels plates for gates etc and similar work including , welding grinding buffing polishing and making curvature (where ever required) and fitting the same with necessary stainless nuts and bolts complete incl, fixing the botto railing with necessary accessories & SS dash fasteners SS bolts ss solid rollers etc,.of required size on top of foor or on top of bottom rail or sides of waist slab with suitable arrangements and similar work etc., complete all as specified and directed |
| 95 | M&L for designed false ceiling with 12 mm thick size 1.2 m x 1.80 m Pop gypsum board sheets fixed with machine screws as per manufacture instructions and including G I channel 22 guage thick grid work main joints placed at 1.20 m centre to centre cross joints placed at 450 mm centre to centre, hanging with 22 gauge GI strip suspenders from roof 'J' hooks bolts and nuts etc and treating the Gypsum board with thin layer of Gypsum with gypsum and hydrous binder and prepare the surface till smooth surface is achieved and applying two coat of oil boud distemper of any patterrn and design over a coat of texture primer on ceilings sheets all complete as required as per manufacture's instructions and directed by the EIC1. The pattern and design shall be as directed by Engineer in charge during the execution of work.2. The exposed surface of the false ceiling shall be joint less even and smooth to receive two coats of oil bound distemper3. The Gypsum board (Pop)/ sheets shall be fixed with suitable screws below the grid and shall not be placed over the grid. |
| 96 | All as per item no. 95 here-in-before but in curved , sunken or raised mouldings surfaces of ceiling complete all as specified and directed. |
| 97 | M&L for insulated wall lining consisting of WPC/ PVC Insulated Panel shaving expanded polystyrene Lowers type projection 10 mm sheet (EPS/ WPC) stuck to 2 mm thick of any colour sheet duly fitted into the wall as per specified and directed. |
| 98 | Material and Labour for providing dark coloured finish UPVC profile casement windows (penable) profile frame consist of high impact modified grade uPVC of 60 mm x 74 mm (outer frame) and sash of 65 m x 105 mm, wall thickness of profile must be minimum 1.8 ± 0.3 mm, which shall be manufactured from tropicalized blend with T Profile and required additives, profile shall be colorfast and conform to standard EN12608, prfile stations shall have multi hollow (min 2 to 3 chabers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber, the thickness of GI shoud be selected to meet the wind load requirement as per IS 875- part-III on sash/mullion and minimum steel steel reinforceent thicknesss of 1.2 mm to 2.5 m, UPVC casement Windows shall be fabricated with fusion welded corners and conform to the strength requireents based on wind load as per IS 875-part -III. All hardware fitted must be stainless steel except handles to be of zinc/Stainless steel, alloy casted Gde 304. Glass shall be of laminated (6T+ 1.23pvb+5T) 8mm thick toughened glass with weather seal (EPDM/TPE). UPVC casement windows shall be installed by profile manufacturer only, Fame fastener 8 mm x 100 mm type shall be used area exceeding 1.0 sqm but not execeeding 2.0s qm each compete all specified and as directed. Make: Fenesta/ Qute Extrusions Pvt Ltd/ Madhu Industries/ H2O solutions/ Prominance/ NCL Wintech/ ALUPLAST/ Rehau India Pvt Ltd/ Veka limited |
| 99 | Material and Labour for providing dark coloured finish UPVC profile casement Doors profile frame consist of high impact modified grade uPVC of 60 mm x 58 mm (outer frame) and sash of 60 m x 78 mm, wall thickness of profile must be minimum 1.8 ± 0.3 mm, which shall be manufactured from tropicalized blend with T Profile and required additives, profile shall be colorfast and conform to standard EN12608, prfile stations shall have multi hollow (min 2 to 3 chabers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber, the thickness of GI shoud be selected to meet the wind load requirement as per IS 875- part-III on sash/mullion and minimum steel steel reinforceent thicknesss of 1.2 mm to 2.5 m, UPVC casement Doors/Windows shall be fabricated with fusion welded corners and conform to the strength requireents based on wind load as per IS 875-part -III. All hardware fitted must be stainless steel 3D hinges, handles to be of zinc/Stainless steel, alloy casted Gde 304. Glass shall be of laminated (6 T + 1.23 pvb + 5 T) 5 mm thick toughened glass with weather seal (EPDM/TPE). UPVC casement Doors shall be installed by profile manufacturer only, Fame fastener 8mmx100mm type shall be used complete all specified and as directed. Make: Fenesta/ Qute Extrusions Pvt Ltd/ Madhu Industries/ H2O solutions/ Prominance/ NCL Wintech/ ALUPLAST/ Rehau India Pvt Ltd/ Veka limited |
| 100 | Supply and fixing of venetian blinds size length exc 1.50 m to n, exc 2.40 m and width exc 1.50 m to n, exc 1.80 m site requirement (vertical blind) using nylon fabric of 260 GSM any colour and design approved by GE. to opening of windows,pertitions etc,.size of blind 100 mm wide and length as per requirement of opening, including all necessary fittings and fitures with box type top ,rollers, rope and other etc,. with operating machanism, and making good to disturbed surface complete all as directed and directed .Note:Warranty period for fade of shade of nylon fabric and mechanism shall be 12 months from the date of completion of project. Make: Zebra Blinds/Unik Wooden blinds/Ikea Schottis/ Vista Levolor/ Aerolux/ MAC |
| 101 | M & L for point wiring with PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade, FRLS of size 4 Sqmm drawn in and including PVC caping and casing surface wiring including modular metal flush box of suitable size with inner and outer white plastic plate (same make of switch andsocket) including continues 4 Sqmm copper conductor (multistranded) PVC insulated and unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified confirming to IS-694 for one 3 pin socket outlet 16 Amps on independent board. |
| 102 | Supply and fixing of Modular Switch socket combination 16 A, 6 pin, 3 module complete all as specified and directed. |
| 103 | Supply and fixing MCB SP 6-32 amp rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 104 | Supply and fixing MCB, SPN 40 Amp rating 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning complete all specified and directed. |
| 105 | Supply and fixing sheet metal enclosure distribution board (DB), when MCB to be used, dust and vermin proof, single pole and neutral (SPN) 4 way with 200 Amps rated copper bus bar double door protection, neutral bar, earth bar, single pole and neutral 240 volts, MCBs used as incommer Double door, flush to wall complete all as specified and directed. |
| 106 | Material and labour for submain wiring using two run of sinlge core PVC insulated cable (FRLS) 6 Sqmm copper conductor multi stranded and 6 Sqmm copper conductor insulated cable (FRLS) as earth wire drawn through and including PVC rigid conduit of size not less than 25mm dia with accessories (concealed) complete all as specified and directed |
| 107 | Supply and install 2 TR Capacity Air Conditioner ,BEE 5 star rating Hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality (inverter type ) including provision of suitable bracket fixing arrangements ,required copper pipe and insulation as per site requirement and as specified and directed. |
| 108 | Supply and fix Voltage stabilizer 5 KVA for automatic operation , single phase naturally air cooled indoor type and designed for input variation between 170 V to 250 V with output voltage stabilizer at 230 V with accuracy of +/- 2.5% model No VG 500 of Make: V Guard /Equivalent. |
| 109 | Taking down carefully (copper/aluminium) point wiring complete of any type (batten/surface conduit or concealed) for light point , bell point socket point or power point complete with all fitting such as switches , sockets pendents regulators etc.,complete and making good disturbed surfaces of wall , floor or ceiling with plaster or tiles or roof treatment etc., and finishing the surfaces with distemper/white washing/colour washing tpo match with the existing surface all as specified and directed. |
| 110 | M & L for point wiring with PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade, FRLS of size 1.5 Sqmm drawn in and including PVC rigid conduit of size not less than 20 mm dia with accessories (concealed) including modular metal flush box of suitable size with inner and outer white plastic plate (same make of switch and socket) including continues 1.5 Sqmm copper conductor (multistranded) PVC insulated and unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified conforming to IS-694 for One light point controlled by one switch 6 Amps |
| 111 | All as per item no.110 here-in-before but for One fan/ exhaust point controlled by one switch 6 Amps |
| 112 | All as per item no.110 here-in-before but for One 3 pin socket outlet 6 Amps on Independent board |
| 113 | All as per item no.110 here-in-before but for One 3 pin socket outlet 6 Amps on same board |
| 114 | All as per item No. 110 here-in-before but with 4 Sqmm PVC insulatedcopper conductor including 4 Sqmm PVC copper conductor used as earth wire for power point / AC point on independent board. |
| 115 | Supply and fixing of Modular switch, one way, 6 Amps complete all as specified and directed |
| 116 | Supply and fixing of Modular switch socket outlet 3 pin 5 amp flush type 3 module complete all as specified and directed |
| 117 | Supply and fixing LED strip lights 6 watts, 5 metre long strips including suitable drive 220V, AC with connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 118 | Supply and fixing LED lights fitting mirror type 2' x 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 119 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 120 | Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers , holders ,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed |
| 121 | Supply and fix Exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200 with Copper winding of sweep 300 mm all as specified and directed. |
| 122 | Supply and fixing ceiling fans complete with blades, down rods, remote controlled regulator and accessories ,230V, 1200 mm sweep, Min air delivery 210 CFM with service valve 6.00 BEE, Five star rated with brushless direct current motor (BLDC) all as specified and directed. |
| 123 | Supply and fixing of ceiling rose in poly carbonate 3 plates flush type 6 amps, 250 volts AC complete all as specified and directed. |
| 124 | Taking down ceiling fan, dismantling blades and removing fan to store, painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. (M&L) including hanging of ceiling fan connecting up including provision of cable from ceiling rose to fan complete all as specified and directed |
| 125 | Taking down Split AC 1.5/ 2 TR, dismantling copper tubes and removing to store, servicing, topping up refrigerent gas including re fixing the same AC after the completion of civil works connecting up including provision of cable from socket to AC complete all as specified and directed. |
| 126 | Supply and fixing fan regulator modular type 02 module type 250 volts AC complete all as specified and directed. |
| 127 | Supply and fixing sheet metal enclosure distribution board (DB), when MCB to be used, dust and vermin proof, single pole and neutral (SPN) 8 way with 200 Amps rated copper bus bar double door protection, neutral bar, earth bar, single pole and neutral 240 volts, MCBs used as incommer Double door, flush to wall complete all as specified and directed. |
| 128 | Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion. |
| 129 | Schedule of Credit (Minus) Rs.15065.00 NOTE: Bidder shall insert credit amount of Rs.15065.00 as rate in Green field under Col-13. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender