Tender For Rehabilitation Of Gates & Emergency Gate And Its Hoisting System Including All Electrical Works And Cctv Surveillance System Of Kangsabati-Kumari Dam In Block- Khatra & Indpur Of Bankura District In West Bengal Under The World Bank Assiste
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Aug 2026
26 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Purulia → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rehabilitation Of Gates & Emergency Gate And Its Hoisting System Including All Electrical Works And Cctv Surveillance System Of Kangsabati-Kumari Dam In Block- Khatra & Indpur Of Bankura District In West Bengal Under The World Bank Assisted Scheme Dam Rehabilitation And Improvement Project, Phase-Ii (Drip-Ii) [2Nd Call To The 1St Call Of Wbiw/Ctu/Ce(Me)/Drip/Rfb-01/2026-27]
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Jul-2026 | CORRGENDUM1 | Other | 18-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply of Gear Oil as per direction of Engineer in charge. filling of H.P Gear Oil 140 grade in new Double reduction gear box to complete the job. |
| 2 | Cost for dismantling different types rubber seal from gate shutter as per direction of E.I.C. The cost includes cost of man power employed for dismantling, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading. |
| 3 | i) Gate shutter size above 20 sq.m upto 50 Sq.m |
| 4 | ii) Gate shutter size above 70 Sq.m |
| 5 | Cost for supplying and fitting fixing of Flat rubber seal (Make : Universal Moulders & Engineer/Popular Rubber Works (Pvt) Ltd/ SAB Industries/Unique Polymer Works/equivelant approved make conforming to lS : 11855 -2011/Latest Revision) for different types of gate shutter as per direction of E.I.C. The cost includes cost of man power employed for fitting fixing, cost of rubber seal, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading but excluding supply of ms clamp/ flat plate, bolts, nuts and washer.(as per sample/drawing) |
| 6 | Cost for supplying and fitting fixing of bulb/musical node/J- type rubber seal (Make : Universal Moulders & Engineer/Popular Rubber Works (Pvt) Ltd/SAB Industries/Unique Polymer Works/equivelant approved make conforming to lS : 11855 -2011/Latest Revision) for different types of gate as per direction of E.I.C. The cost includes cost of man power employed for fitting fixing, cost of rubber seal, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading but excluding supply of ms clamp/ flat plate, bolts, nuts and washer.(as per sample/drawing). i) solid bulb: size- 40Φ 140 X 12 mm |
| 7 | Cost for supplying and fitting fixing of angle type rubber seal (Make: Universal Moulders & Engineer/Popular Rubber Works (Pvt) Ltd/ SAB Industries/Unique Polymer Works/equivelant approved make conforming to lS : 11855 -2011/Latest Revision) for different types of gate as per direction of E.I.C. The cost includes cost of man power employed for dismantling & fitting fixing, cost of rubber seal, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading but excluding supply of ms clamp/ flat plate, bolts, nuts and washer.(as per sample/drawing). i) size: (75 x 75mm) x14mm(thick) |
| 8 | Cost for supplying and fitting fixing of corner rubber seal (Make: Universal Moulders & Engineer/Popular Rubber Works (Pvt) Ltd/ SAB Industries/Unique Polymer Works/equivelant approved make conforming to lS : 11855 -2011/Latest Revision) for different types of gate as per direction of E.I.C. The cost includes cost of man power employed for dismantling & fitting fixing, cost of rubber seal, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading but excluding supply of ms clamp/ flat plate, bolts, nuts and washer.(as per sample/drawing) i) Rubber Corner Seal size 40Φ 140 X 12 mm |
| 9 | Supplying of M.S flat for clamping Rubber seal with hole as per direction of EIC. |
| 10 | Supplying of M.S bolts with nut for clamping Rubber seal as per direction of EIC. |
| 11 | Supply and fabrication of new stainless steel plate/flat (AISI - 304) of suitable size on seal beam / roller track/ slide track/ side seal seats/ top seal seat by welding (SS) as per direction of the Engineer- in-charge including cost of Materials, Machinaries , Manpower, Cutting, Aligning, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification. |
| 12 | Dismantling and fixing only of trunion assembly and guide roller assembly of radial gate of barrage/dam gate. The cost includes cost of manpowers, hire charges of T&P, chain pulley blocks, scaffolding, and overhead cost etc to complete the job as per direction of Engineer in charge. |
| 13 | Dismentling rope drum hoisting system completely of Dam/ Barrage gate, consisting of geared motor/motor, gear box, manual operating system, chain & sprocket, couplings, braking arrangement, power transmission shafts, spur gears, rope drum, rope, rope clamps, trunion etc part by part for repairing/replacement of gates and staking suitable place upto lead of 500 metre or as per direction of E.I.C. The cost includes cost of man power employed for dismantling of hoisting system, hire charges of mechanical devices for hanging the gate properly for repairing works, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading. i) Width of Gate shuteer size upto 12 metre |
| 14 | Supply & fitting fixing of round strand (steel core/fibre core) steel wire rope (ungalvanised, IWRC) of 6x36 construction of 1960 tensile designation as per IS-2266 (make: Usha Martin, Bharat Wire Ropes ltd or BIS approved makes), rope clamp with Dishakle and fitting fixing of said material with correct alignment and position inclusive of all cost of labour, T&P, scaffolding charges & all other incidental charges as necessary to complete the job in all respect upto the satisfaction of E.I.C. |
| 15 | i) 22 mm dia (steel core) |
| 16 | ii) 24 mm dia (steel core) |
| 17 | Cost for arrangement of holding the Dam / Barrage gate and its counter weight by special fixures, tools and tackles, chain pulley block and heavey scaffolding etc as per requirement for performing repairing works at the site. The cost includes cost of mampowers, hire charges of T&P, chain pulley blocks, scaffolding, and overhead cost etc to complete the job as per direction of Engineer in charge. |
| 18 | i) Gate shutter size above 10 sq.m upto 20 Sq.m |
| 19 | ii) Gate shutter size above 70 Sq.m |
| 20 | Supply, installation, testing and commissioning of following items for hoisting system and gear box as mentioned below as per direction including cost of Materials, Machineries , Manpower, Cutting, Machining, aligning, anchoring, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting). |
| 21 | Rope Drum-Required of size P.C.D-342mm. , ID-110mm.Flange OD-435mm, Flange thk-25mm, Length-406mm dismantling of wire rope and refitting the same to complete at site up to satisfaction of E.I.C.(as per sample/drawing). c) Cast Steel |
| 22 | Shaft /Pin with key ways made of size (diameter) =50 mm, length = 500 mm made up by forged steel C-45, IS-1570, with keyway and splined cutting at required position of the shaft,having depth of keyway splined groove=5 mm as per drawing/sample, at site and up to satisfaction of E.I.C. a) Forged Steel |
| 23 | Plumber Block/Pillow Block/Bearing Housing (FG 400)- make with SKF- bearing no-1210 ETN-9, ID=50mm to accommodate 50 mm dia shaft Including oil seal.(as per sample/drawing). |
| 24 | Self-aligning ball Bearing (S.K.F) for shaft size b) Self aligning ball Bearing (S.K.F) for shaft size = 50 mm dia (1210 ETN-9) |
| 25 | Self-aligning ball Bearing (S.K.F) for shaft size e) Self aligning ball Bearing (S.K.F) for shaft size = 80 mm dia (1216 K) |
| 26 | Jaw/Clutch Coupling (Mat: C45)-Required of size OD-120mm, ID-50mm, L-180mm, accommoded with suitable splined shaft ( size dia.-50mm ) including operating handle and lever arrangement complete as per direction of E.I.C. (as per sample/drawing). |
| 27 | Manual operating mechanism a) chain-Required of double strand & triplex chain IS. No. 10B series RENOLD make chain to be fitted in two pair of chain sprocket shaft to shaft distance about 0.75m and 1.2m and P.C.D of two pair of sprocket are 157mm &157mm and 157mm &117mm total 4.3m length including all necessary fixure to complete the job at site as per direction of E.I.C (as per sample/drawing). |
| 28 | Manual operating mechanism b) sprocket (Aloy Steel)- double strand & triplex chain IS. No. 10B series chain sprocket of size P.C.D-117mm. OD-125mm. ID-40mm, size P.C.D-157mm. OD-165mm. ID-50mm At site up to satisfaction of E.I.C. (as per sample/drawing). |
| 29 | Position Indicator including its Coupling and Gearing-Required of dial gauge indicator compraising of pinion of P.C.D-50mm, No. of Teeth-50Nos, Gear of P.C.D-200mm, No. fo Teeth-200Nos, Sheet metal graduated dial board of dia-300mm framed in a M.S structure complete assembly to complete at site up to satisfaction of E.I.C. |
| 30 | Supply of brake shoe assembly for following sizes of AC Solenoid brake. c) Drum size 7\\", (make BCH or eqv.) |
| 31 | Oiling greasing of hoisting gear boxes (for rope drum and chain hoist) of dam /barrage gates and head regulator gates of dam/barrages by cleaning, checking, greasing /lubricating the gears, plummer bocks, bearings, manual drive etc including all charges of man & materials which include oiling, greasing, refilling of gear oil excluding supply of gear oil and grease and fixing of damaged oil seals & missing nut & bolts etc complete as per direction of EIC.(Gear oil & Grease provided extra.). |
| 32 | (a) Width of Gate shutter size upto 9 metre. |
| 33 | (b) Width of Gate shutter above 9 metre. |
| 34 | Supply of Grease -make Servo MP3 |
| 35 | Cleaning gates / hoists / embedded parts/lifting beams etc, to expose fresh metal surface for painting by sand blasting method as per specifications including cost of all materials, labour, machinery, scaffolding, etc., complete with initial lead for sand upto 1 km and all lifts. |
| 36 | Painting of embedded parts, all types of gates, stoplogs and barscreen/ gratings etc on prepared surfaces with one coat of inorganic zinc silicate primer (airless spray preferred)70+/ - 5 micron and two super coats with a total thickness of 300 microns (each 150+/- 5) of solventless coaltar epoxy paint each coat 150 microns ( total 300 microns) including cost of all materials, labour, scaffolding etc., complete with all leads and all lifts. |
| 37 | Surface cleaning of metal surfaces by chemical cleaners and then by hand with emary paper, wire brush and power tool cleaners and removing dust and preparation of surface including cost of all materials, labour, machinery, scaffolding, etc., complete with initial lead for sand upto 1 km and all lifts. |
| 38 | Painting hoist structural components, trestle bridge, crane, lifting beam, cat work bridge and other similar structure on prepared surfaces with two coats of zinc phosphate primer (airless spray preferred) 40 microns/coat and one coat 65+/-5 micron of alkyd based micaccous iron oxide paint followed by two coats of synthetic enamel paint 25 microns/coat including cost of all materials, labour, scaffolding etc., complete with all leads and all lifts |
| 39 | Cost for repairing of radial gate shutter of Dam / Barrage including dismantling the damaged portion at lower part (skin plate, horizontal/ vertical girder/stiffener etc. as per IS : 2062 - 2011 /latest revision) not more than 25% of gate height from bottom by gas cutting and fitting, fixing and fabricated by welding as per direction including cost of Materials, Machineries , Manpower, Cutting, aligning, anchoring, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting). |
| 40 | Fabrication,Supply,erection and commissioning of new Radial Head Regulator service gate of Dams and Barrages as perIS:4623‐2000/Latest Revision consisting of skinplate, vertical, horizantal grider, radial arm and stiffener, trinnion assemblies etc.made of MS material consisting of angle , channel,beam,plate, flat, etc. conforming toIS :2062‐2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries , Manpower, Cutting, Bending, Aligning, drilling, Welding, Finishing, Consumables, Carriages and all overheads with all leads and lifts complete as per specification (without painting). |
| 41 | Repairing/replacement/strengthening of damaged/heavily corroded portion of cross/horizontal/ vertical steel members, chequered plate, stair case, hand railing etc. of MS hoist trestle bridge, catwalk/walkway bridge and other similar MS structure on dam/barrage and canal/rivers which includes dismantling of damaged portion of structural members and fabrication and finishing to the required shape & size as per direction. The Cost includes cost of Materials, Machineries , Manpower, Cutting, aligning, drilling, Welding, Finishing, Consumables, Carriages and all overheads with all leads and lifts complete as per specification (without painting). |
| 42 | Fabrication , supply, erection and commissioning of embedded parts consisting of seal beam, roller track, side seal seats, and yoke girder etc. with all accessories for spillway Radial service gate of dams and barrages made of MS material consisting of angle , channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machineries , Manpower, Cutting, aligning, anchoring, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting). Remarks: Cost for civil works to be taken from PWD (R) directorate separately. |
| 43 | i) Insert plate welded with J hook |
| 44 | ii) Seal beam |
| 45 | iii) Roller Track/ Side seal seat/ Yoke Girder |
| 46 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. above 150 mm. Thick. |
| 47 | Supply and fitting fixing of foot mounted Optimax geared motor of size R83ZDB 100L-4BS suitable for 2.2 KW at 36RPM, 415(+,-) 10% Volt, 50(+,-)5% Hz. Class F Insulation, IP-55 Protection 150 starts per hour 45 Degree Centigrade Amb. Tem, DOL starts & fitted with manual release arrangement. |
| 48 | Cost for Welding charges on existing gate shutter in site by skilled welder at the vulnerable location as per direction and as per IS 4622 - 2003. |
| 49 | Supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg). |
| 50 | Dumping in position earth / sand filled gunny / poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts. |
| 51 | Labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,( tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per direction of Engr-in-charge (cost is excluding the cost of any types of filling materials).NB:- Volume of earth/ sand filled bags should not be less than 0.028 cum/ bag. |
| 52 | Removing earth/sand filled poly bags/gunny bags from the channel bed/slope and initially depositing the same near channel bank at bed/slope and initially depositing the same near channel bank at a place as directed by the enginner - in charge for measurement of bag & then disposing off the same at a distance not less than 150 metre from the channel site. |
| 53 | Bailing out water by pump including all leads and lifts and including making all arrangements for disposal, where continuous flow or seepage of water is encountered and rating of pumps and hours of operation is specifically ascertained as per direction of the Engineer-in-charge. |
| 54 | Carriage of Steel materials over pucca road, Above 5 km up to 10 km (per km). (Zone-A). |
| 55 | Loading, unloading and stacking by Manual Means.A. Loading in to trucks at the lifting point, unloading at destination, stacking properly in go downs or yard etc. as directed including carriage by head load up to a lead of 50.00 m at each of the two points.(h) Steel. |
| 56 | Plain / Reinforced Cement Concrete in Substructure with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality, cement and water reducing admixtures, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete as per drawing and technical specification including the cost of necessary form work and staging complete as per drawing and technical specifications. F RCC Grade M30 (i) Height upto 5m I) Using concrete Mixer Aggregate source- Bankura railway stackyard (58 Km). |
| 57 | Design, drawing, fabrication, supply, erection, testing and commissioning of 25 tonne capacity Class‐ II type moving gantry crane consisting of rail mounted gantry frame, top platform with hand railing, long / cross travel arrangements, rope drums, gear systems,electric motors, electromagnetic brake system, cabin, control panel, wire rope, ladder, motorised cable reeling drum etc., with all accessories for operating spillway stop log gate elements and river sluice / canal sluice emergency gates including cost of all materials,machinery, labour, etc. |
| 58 | Design, drawing, fabrication, supply, erection, testing and commissioning of structural steel hoist bridge, Rail support Girder(for Gantry crane) & cat walk/walkway bridge on dam/barrages and canal/rivers consisting of foundation bolt assembly, base plate, columns,beams, bracings, stiffeners, ties, chequered plate covering, hand railing, staircase etc., with all accessories including cost of all materials, machinery, labour, welding, finishing, etc.,complete as per specifications and drawings with all leads and lifts (without painting ). |
| 59 | Design, drawing, fabrication, supply, erection, testing and commissioning of rail track (pair of rails) using 45 kg /m standard rails on spillway bridge for movement of gantry crane for handling and operating spillway stoplog gate elements / river sluice / canal sluice emergency gate including cost of all materials, machinery, labour, aligning, anchoring, welding & finishing complete as per specifications (without painting). |
| 60 | Fixing and Casting of Foundation bolts of Gantry Girders on the pier top. |
| 61 | Design, drawing, manufacture, supply, erection, testing and commissioning of 10 ton capacity electrically operated fixed type pulling winch machine for cross travel movement of your existing 10 ton capacity hoisting equipment used for lifting of log gates with all accessories including cost of materials, machinery and labor etc. [for RBHR] |
| 62 | Dismantling of Existing manually operated Trolley. |
| 63 | Design, drawing, manufacture, supply, erection, testing and commissioning of geared brake motor with CT shaft and required couplings to make the existing manually operated CT movement of 10 ton hoisting equipment, motorized. The geared brake motor rating shall be 0.75 KW flange mounted motor fitted with parallel shaft helical gearbox and DC E/M disc brake. The CT speed shall be 8-10 M/Min ( +/- 10% ) including cost of materials, machinery and labor etc. [for LBHR] |
| 64 | Dismantling of Existing stop-log gate from it's original position. |
| 65 | Fabrication , Supply, erraction and commissioning of vertical lift stoplogs gate elements (all interchangeable) consisting of skin plate, vertical and horizontal girders, stiffeners, lifting brackets, ballast blocks etc., with all accessories for barrage/dam vent including cost of all materials, machinery, labour,welding ,aligning finishing seal fixing etc.with al lleads and lifts, complete as per specifications and approved drawings. |
| 66 | Fabrication , Supply, erection and commissioning of embeded parts consisting of seal beam,slide track / roller track, side seal seats , top seal seats and guide path with all accessories for Head regulator vertical service gate / Emergency gate/ other vertical lift element of dams and barrages made of MS material consisting of angle , channel, beam, plate, flat, etc. conforming to IS : 2062 ‐2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries , Manpower, Cutting, Aligning, Anchoring,Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting).Remarks: Cost for civil works to be taken from PWD (R) directorate seperatly. |
| 67 | i) Insert plate welded with J hook |
| 68 | ii) Seal beam. |
| 69 | iii) Roller Track/ Slide Track/Side seal seat/ Guide Path/Top seal seat. |
| 70 | Dismantling of damaged embeded part like guide channel/bottom seal beam/top seal beam of gates of canal/river from civil structure as directed by the Engineer-incharge.The cost of man power employed for dismantling and hire charges of Tools and Plant, scaffolding charges etc. Payment will be made on actual length of Guide Channel. |
| 71 | Fabrication , Supply, erection and commissioning of new fixed wheel type vertical lift Head regulator service gate/Emergency gate of Dams and Barrages as per IS: 4622 ‐ 2003/Latest Revision consisting of skin plate, vertical and horizantal grider, stiffener etc. made of MSmaterial consisting of angle , channel, beam, plate, flat, etc. conforming to IS : 2062 ‐2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries , Manpower, Cutting, Aligning, drilling, Welding, Finishing,Consumables, Carriages and all overheads with all leads and lifts complete as per specification (without painting). |
| 72 | Tick wood Sofa set best quality 3+2 sheter and table. For control room at office of EE, KMD, Khatra. |
| 73 | Design, drawing, fabrication, supply, erection, testing and commissioning of automatic lifting beam with all accessories for handling, lowering and lifting of spillway stop log gate elements including cost of all materials, machinery, labour, cutting, aligning, welding,finishing, etc., complete as per specifications and drawings with all leads and lifts. (without painting). |
| 74 | Supplying of 415 V, TPN double door motor control center with canopy head in 14 SWG sheet steel enclosure (size 600mm x 500mm x 250mm deep) complete with control switch with HRC fuse L&T / Siemence make control block reversible starter unit with mechanical interlock, LED type Mikado make indicator lamp showing \\"Power On\\", \\"Hoist\\", \\"Lower\\", and \\"Trip\\" with 3 nos. push buttons with elements tripping mechanism with Sneider / Siemence Make overload relay, 2A capacity HRC type control fuse with 16-20A bakelite base, 0 to 30A range ammeter on the door cover with all electrical interconnection complete and fitting fixing the same on iron legs of pedestal stool at suitable position including S&F of terminal blocks for outgoing connection to motor and limit switches. |
| 75 | Supply and fixing of finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc. including supplying sockets, tapes. |
| 76 | Supplying and fixing 240/415V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection 6-32A, TP, L & T make. |
| 77 | Supplying of insulated 4 sq.mm 'FR' stranded Copper Wire. |
| 78 | Supplying of insulated 2.5 sq.mm 'FR' stranded copper wire. |
| 79 | Supplying and fitting fixing of Limit Switch with digital display unit of approved make including testing, commissioning the upper limit and lower limit functioning propriatly to complete the job at site up to satisfaction of E.I.C. |
| 80 | Supply and fitting fixing of TATA G.C. Sheet including with all necessary 'J' hook, nuts, washer etc. to complete the job at site up to satisfaction of E.I.C. |
| 81 | Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991) 4 bar 415 v 200A , Dimension of Al bars [85mm long] 4 x 50x5mm, Dimension of sheet metal box-500x150mm , |
| 82 | Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 160A (make L & T) , |
| 83 | Supplying and fixing 415V, TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc , 200A , L&T make. |
| 84 | SUPPLYING OF FOLLOWING XLPE INSULATED ALUMINUM CONDUCTOR ARMORED CABLES OF 1.1KV GRADE AS PER IS 7098 (PART 1) 1988 WITH UP TO DATE AMENDMENTS. 4 CORE 95 Sqmm. |
| 85 | Laying of cable above 3½ core 90 sqmm and upto 3½ core 150sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting. |
| 86 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required f) 100 mm dia ISI Medium ( Jindal Make) |
| 87 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below, For 4 core upto 95 sqmm. |
| 88 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials, 3½ core 95 sqmm cable. |
| 89 | Excavation of soil for installation of Earth Electrode and filling & ramming. For morrum soil. |
| 90 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: (a) By TATA-Medium GI pipe, |
| 91 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. |
| 92 | Supply of OPR 60 (Make:- ABB). |
| 93 | Supply of mounting Mast, 2m, 30mm dia, make ABB. |
| 94 | Supply of mounting Mast, 3m with guywire and base plate ,[Make:- ABB). |
| 95 | Supply of lighting stroke counter, make ABB. |
| 96 | Supply of Single core cable (either 70 sq. mm copper or 100 sq. mm aluminium) (inclusive of external UPVC pipe , clamp, elbows and accessories) / GI strip 25 x 6 size (inclusive of material, installtion, Epoxy paint, shorting link and fixing accessories like porceline insulator, Fastner, nut bolts, stay wire with nylon jacket). |
| 97 | Cost of ' Electronic type' Earth pit (inclusive of construction charge for each earth pit + Earth electrods' - pipe in pipe type -- + 1 bag (25 kgs bag) GRIC (ground resistance improvement compound)-- + earth pit cover for each earth pit. |
| 98 | Cost of civil work for commisioning (charges including material) , designing , supervision labour charges for installation of lighting arrestor labour charges for installation of cable of required length for installation , GI bar/ copper bar adequate size to make inspection joint ) , materials charges for 2 nos. copper cable of 70 sqmm of required length for installtion , GI bar / copper bar of adequate size to make inspection joint , transportation for above entire work. |
| 99 | S.I.T.C of KIRLOSKAR 100 KVA 3 phase CPCB-IV + DG set with liquid cooled Engine Model 4K1080ETA 4G1 & coupled with KG-make alternator with Standerd panel,Acoustic Enclosure & Base frame. |
| 100 | Installation, Testing & Commissioning of Computer along with Monitor, Router, Switch, firewall system and A3 color printer Monitor 27\\"model no- M27F , IPS, FHD , CPU - i-5, 8GB, 512SSD, Win-11, Pro. Pre-loaded make- HP commercial model no - 782NIPA . copir model no- IRC 3226 with DADF for control room At office of EE, KMD, Khatra. |
| 101 | CAMAERA & DISPLAY |
| 102 | PTZ Camera 2MP 100 to 120 Mtr iR (Make: Hikvision, Model no. DS-2DE4225IW-DE) |
| 103 | Fixed Bullet Camera 4 mp 50-60 Mtr iR (Make: Hikvision, Model No. DS-2CDIT43GO-I) |
| 104 | Sony LED-Ultrafine Smart monitor UHD 4K IPS Panel monitor(Make- Sony, model no. K-43S22M2). |
| 105 | STORAGE |
| 106 | Survialliance HDD 8 TB, Seagate. |
| 107 | 64 Channel NVR - 4 SATA (Make: Hikvision, Model- DS-7764NI-M4) |
| 108 | NERWORKING ITEMS |
| 109 | ALCON WIS-EAP 520 ENTERPRISE ACCESS POINT (Model No.- WIS-EAP520 11AX1800MBPS Dual Band, Wifi 6) |
| 110 | Alcon POE Injector for P2P. |
| 111 | TP-Link 24 Port POE Switch and 4 SFP (Make- TP-Link Model No.- TL-SL2428P 24 Port POE Switch). |
| 112 | TP-Link 16 Port POE Switch and 2 SFP(Make- TP-Link, Model No.- TL-SG1218MPE). |
| 113 | TP-Link 8 Port POE Switch and 2 SFP(Make- TP-Link, Model No.- TL-SG3210). |
| 114 | Cisco 1G SFP Module (Make:- Cisco Model no.- GLC-LH-SM-20, Brand name- QSFPTEK). |
| 115 | D'link RJ45 CONNECTOR. |
| 116 | CABLES |
| 117 | Digisol OFC Single Mode 6 Core. |
| 118 | Polycab 3 Core 1.5 SQ. MM Cu Armored Power Cable. |
| 119 | D'link Cat6 UTP Cable 305 Mtr. |
| 120 | ONLINE UPS. |
| 121 | 3KVA Online UPS for Control Room with 1 Hour Backup (Make: BPE, Model No.- MF1103B8) |
| 122 | 1KVA Online UPS for control room with 1 Hours backup APC Make Model RC1000 VA with inbuild battery. |
| 123 | ACCESSORIES. |
| 124 | SS Rack 24U Floor Standing Rack 600 x 600 Full Loaded at CR |
| 125 | Outdoor 4U Rack Pole Mount Full Loaded - (Make: Netrack/VAL/Schneider). |
| 126 | Rack Indoor Wallmount Rack 6U Rack Full Loaded |
| 127 | D'link Rackmount LIU 24 Port Full Loaded at LBMC Lodge(Make: D'Link, Model No.- NLU-FSDLLCR-24) |
| 128 | D'link LIU full Loaded for Outdoor Pole 6 port (Make- D'Link, Model No.- SC SM). |
| 129 | ISI PVC Pipe 25mm with others accessories. |
| 130 | HDPE Pipe 32mm with others accessories. |
| 131 | Junction Box with 16A DP MCB (Make- Havells). |
| 132 | 16A Power Sokect for Outdoor Junction Box IP 55 outdoor enclosour make- C&S (Model No.- CG26400W). |
| 133 | Fixing of Camera with Pole Mount Bracket (Make- Bectro). |
| 134 | Galvanized Round Steel Triangle Guyed Steel Tower with Civil Foundation 24 mtr |
| 135 | Hexagonal Pole 6Mtr. And Civil Foundation at Control Room Site |
| 136 | Desktop spec: ci7@14gen, 16gb ram DDR5, 1 tb NVMe ssd, 22\\" LED, Keyboard, Mouse, Windows 11 prof, SMPS [gigabite SMPS make- GYGABYTE GP-P450B80, CABINET MAKE- ZEBRONIX ZIUM, MONITOR MAKE- SAMSUNG 22\\" IPS, (MODEL NO.- LS22C310EAWXXL), RAM MAKE- CRUCIAL (MODEL- CT16G 48C 40U5), PROCESSOR MAKE- INTEL CORE I7- 14700KLGA, NVME MAKE CROCIAL (MODEL- CT1000P3SSD8)] |
| 137 | CABLE LAYING AND SOCKETING |
| 138 | Undergrouond Digging through Soft Soil Cable Laying Charges. |
| 139 | Undergrouond Digging through Hard Soil Cable Laying Charges. |
| 140 | Undergrouond Digging through Hard Soil Cable Laying Charges. |
| 141 | Cat6 UTP, OFC & Power Cable Laying Charges |
| 142 | OPERATION AND MAINTENANCE |
| 143 | One Time SITC and 1st Year operation of CCTV Surveillance system installed at Mukutmonipur Dam Area including providing the broadband internet facilities for remote access. operation through skilled engineering manpower 01 nos./day x 365 days = 365 nos. + 30 nos./year on emergency basis. |
| 144 | Annual operation & maintenance for 2nd, 3rd, 4th & 5th year by providing a trained engineer, and Comprehensive warranty for CCTV Surveillance system along with accessories, installed at kangsabati dam Area. This includes replacement of materials & consumables as & when required, including the broadband internet facilities for remote access. Operation & maintenance through skilled engineering manpower 01 nos./day x 365 days = 365 nos. + 30 nos./year on emergency basis. |
| 145 | Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC)of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. |
| 146 | 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) |
| 147 | 2 x 56/0.3 (4 sqmm) + 1 x 22/0.3 (1.5 sqmm) |
| 148 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface], Average run 6 mtr |
| 149 | Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x 65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/ perspex cover and making necessary connections as required. |
| 150 | Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x 65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/ perspex cover and making necessary connections as required, |
| 151 | Supplying of approved make high speed ceiling fan (ISI marked) of following sizes having double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts, 900mm/ 1050mm/ 1200mm, USHA(Striker) MAKE. |
| 152 | Fixing only ceiling/wall fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. |
| 153 | Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/ perspex top cover incl. making necy. connections etc, |
| 154 | Supply TMC501 Conventional industrial batten Philips LEDtube, model no : TMC 501 P 2xT-LED 22W P3242 with 2nos Mas LEDtube 1200mm 18W865 T8 I - 2100lm including necessary connection, |
| 155 | Supplying of different types of LED lamps Havells make, NU Bulb Plus 9W 865 B22 3 Star |
| 156 | Fixing only lamp |
| 157 | Supplying of approved make exhaust fan heavy duty with mounting frame, blades AC 230-250. 150mm sweep RPM 90011400(6\\"), EPC/Crompton, |
| 158 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 23 cm (9\\") |
| 159 | Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages,Solid GI wire, No. 4 SWG. |
| 160 | SUPPLYING OF FOLLOWING XLPE INSULATED ALUMINUM CONDUCTOR ARMORED CABLES OF 1.1KV GRADE AS PER IS 7098 (PART 1) 1988 WITH UP TO DATE AMENDMENTS. 2 CORE 6 SQMM. |
| 161 | Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting |
| 162 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables. For 2 core upto 6 sqmm |
| 163 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials, 2 core 06 sqmm cable |
| 164 | Supplying and fixing Sheet steel Main Switches on flat iron frame on wall, 240V DP with fuse on L&N 30/32 A, Standard make. |
| 165 | Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. |
| 166 | 2+10 way, Seimens make. |
| 167 | 2+6 way, Seimens make. |
| 168 | Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to 5A 3 pin flush type plug socket with piano key type switch (Anchor make) fixed on sheet steel fabricated CRC MS switch board with bakelite/perspex (wall matching color) top cover of 3 mm thick flushed in wall by housing the board after cutting brick wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping on surface and Switch board concealed] On Board. |
| 169 | Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection, DP, 40 A, Seimens make. |
| 170 | Supplying & Fixing GI Modular Switch Board of the 4 Module complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages tobuilding works, |
| 171 | Supply of KSB single phase 1.5 HP Submersible pump set CORA 2C/18 CORA 100+LX PLUS. |
| 172 | Supply only 3 core 2.5 sqmm Flat pvc insulated copper cable (make poly cab or approved per satisfection of EIC) |
| 173 | Supply and delivery of direct on line ( DOL) strater panel board conforming to ISl3947 and IEC 947 of suitable HP rating for operation in 230V (+10%) AC, single phase, 50HZ(+5yo) comprising of ammeter, voltmeter, thermal overload relay,2 pole magnetic contactor, under voltage protection, indicating lamp, capacitors, on/off push buttons including 5 way connector, wiring with l/1.5 sq. mm PVC insulated copper wire, powder coated vermin proof box of following capacities:1.5 H.P. (Relay Range 9-14 Amp.) |
| 174 | Supply and Installationof Split type room air conditioning machine of following tonnage capacity 3 star rating fifled with rotary crompresser and cooling capacity min. 6000 k cal/Hr., minimum discharge air flow 800cum mtr, 800EER ( W/W) 2.7-2.89. (Rates are inclusive of extra refrigerant pipe drain pipe connecting cable) up to the satisfaction of the EIC. 1.5 Ton (Make : Hitachi) 3 star non-inverter type. |
| 175 | Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 176 | Supply & fitting fixing of V- Guard VND 400 Voltage Stabilizer for 1.5/2 Ton AC (150V-290V) with suitable arrengements as require . |
| 177 | Supplying and fixing Sheet steel Main Switches on flat iron frame on wall. 32A, 415V TPN with fuse on L&N (Standard) |
| 178 | Supplying and fixing Sheet steel Main Switches on flat iron frame on wall. 32A, 240V DP with fuse on L&N (Standard) |
| 179 | Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment 2Way |
| 180 | Supplying of diHerent types of LED lamps (12W) Make: Crompton, LED 12W - B22 - CDL. |
| 181 | Supply and fixing of EnduraLED Bulkhead Pressure Die cast housing LED bulkhead with IP66 Protection and IK09 impact resistance suitable for surface and wall mounting applications on ceiling fifling on wall /ceiling by screws etc. Make ; Bajaj, 10W LED |
| 182 | Supply of 3 pole power contactor type ML3, 40A current rating. |
| 183 | Supply, fixing, testing & commissioning wall/floor mounted LT panel primer coated with powder coated paint &provided with required gasket for dust/vermin proof with degree of protection IP42 suitable for 415Volt 3phase, 50 Hz, 4 wire system fabricated out of CRCA sheet up to 2 mm thick (1.6mm for doors) duly compartmentalized for incomer, bus section, outgoings, cable alleys & CT, PT Ampere , Volt , selector switches, frequency , phase indicating lamp, Energy complete including cost of busbar supports, detachable cable gland plates,2 earthing terminals, internal wiring &fixing of separately supplied MCBs, MCCBs, ACB, panel mounted changeover switch/SFUs, etc. as required but excluding cost of busbar strips, Ampere , Volt , selector switch as per approved design & specification. |
| 184 | Supply of copper busbar for electrical power distribution. |
| 185 | Supply of moving iron type analog AC ammeter (accuracyclass 1.5), model-SMI-96 of following range 0 to 200A |
| 186 | Supply of 0 to 600V range moving iron type analog ACvoltmeter (accuracy class 1.5), model-SMI-96 |
| 187 | Supply of 0 to 600V range moving iron type analog ACvoltmeter (accuracy class 1.5), model-SMI-96 |
| 188 | Supply of voltmeter selector switch Votage between phaseswith OFF, 4 Pos. 90° angle of throw (OFF-RY-YB-BR) |
| 189 | Supply of voltmeter selector switch Votage between phaseswith OFF, 4 Pos. 90° angle of throw (OFF-RY-YB-BR) |
| 190 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Make Legrand) |
| 191 | 32A,TP |
| 192 | 32A,DP |
| 193 | Supplying and fixing 415V, TPN SFU openexecution in existing SS enclosure/cubical with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 160A, Siemens |
| 194 | SUPPLYING OF FOLLOWING XLPE INSULATED ALUMINUM CONDUCTOR UNARMORED CABLES OF 1.1KV GRADE AS PER IS 7098 (PART 1) 1988 WITH UP TO DATE AMENDMENTS. 1 CORE 35 SQ.MM |
| 195 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm , |
| 196 | Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity, Do - by fine sand, PWD building schedule - Item no 4 & Pg.No.2/ PWD Building works 2017 5th cor. |
| 197 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. |
| 198 | Brick work with 1st class bricks in cement mortar (1:6). In foundation and plinth. |
| 199 | Reinforcement for reinforced concrete work in all sorts of structuresincluding distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation and upto roof of ground floor/upto 4 m , (i) Tor steel/Mild Steel , I. SAIL/ TATA/RINL, |
| 200 | Reinforcement for reinforced concrete work in all sorts of structuresincluding distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation and upto roof of ground floor/upto 4 m , (i) Tor steel/Mild Steel , I. SAIL/ TATA/RINL, |
| 201 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] With 1:4 cement mortar (a) 15 mm thick plaster |
| 202 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor), 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. |
| 203 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.a) In ground floor including roof. |
| 204 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m.In ground floor including roof.(a) upto 150 mm. thick. |
| 205 | Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars.(a) In ground floor including roof. |
| 206 | Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. |
| 207 | Pre-Constructional Anti-termite measures:(a) Anti termite treatment to bottom surface ( in case of masonry foundation and basements) and the sides (upto a height of 300 mm. from bottom) of the excavation trenches with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 Litres per sq. m. area. The work shall be carried out as per specification described in 6.2.1. of code IS-6313 (part -II) 1981. (Mode of measurment will be the plan area of foundation treated.) |
| 208 | Pre-Constructional Anti-termite measures: (b) Anti termite treatment to back filling of the masonry foundation with chemical emulsion by admixing chloropyrofos emulsifiable concentrates ( 1% concentration) with water by weight at the rate of 7.5 Litres per sq. m. of the vertical surface of the substructure for each side of the foundation.. The work shall be carried out as per specification described in 6.2.2. of code IS-6313 (part -II) 1981. (Mode of measurment will be vertical area treated.) |
| 209 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 210 | Providing and laying Design Mix concrete for plain /reinforced concrete work in any part of bridge (excluding bottom plugging) with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control,sampling, testing etc. all complete but excluding cost of labour and materials for formwork & reinforcement works. a) M-15 Grade Using concrete mixer. Aggregate source- Bankura railway stackyard (58 Km). |
| 211 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) c) (i) With carried earth arranged by the contractor within a radius of 1 km. including cost of carried earth. |
| 212 | Pre-Constructional Anti-termite measures: (c) Anti termite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 Litres per sq. m. of the surface before sand bed or sub-grade is laid. Holes upto 50 mm. to 75 mm. deep at 150 mm. centre to centre both ways shall be made with 12 mm, diameter mild steel rod on the surface to facilitate saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in para 6.4 of code IS- 6313 (part -II) 1981. ( Mode of measurment will be per Sq.m of plan area of plinth treated.) |
| 213 | Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture]M 20 Grade(i) Pakur VarityAggregate source- Bankura railway stackyard (58 Km) |
| 214 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m, II.JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL. |
| 215 | (b) Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required), |
| 216 | Brick work with 1st class bricks in cement mortar (1:6) (b) In superstructure, ground floor, |
| 217 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] ii) With 1:4 cement mortar. |
| 218 | a) 20 mm thick plaster |
| 219 | b) 15 mm thick plaster |
| 220 | c) 10 mm thick plaster |
| 221 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick), |
| 222 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (b) Two Coats, i) Water based interior grade Acrylic Primer. |
| 223 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :(Two coats) ii) Luxury Quality. |
| 224 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor.3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (iii) 35 mm. thick. |
| 225 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) I(I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. B) Light Colour. |
| 226 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).d) Sal : Local. |
| 227 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (iv) 25mm thick shutters with 12mm thick panel of size 30 to 45 cm. (c)other Local wood. |
| 228 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 229 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (b) Two Coats. |
| 230 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. a) Normal Acrylic Emulsion. |
| 231 | b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 232 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 233 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white), |
| 234 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : b) On steel or other metal surface : With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white), |
| 235 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (b) 40mm X 6mm, 200mm Length, |
| 236 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.(vi) 100mm. X 50mm. X 1.25mm. |
| 237 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete.(i) 250mm x 16mm dia bolt. |
| 238 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:(iv) 150mm long x 10mm dia. bolt. |
| 239 | Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G . of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete. |
| 240 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(A) For Exposed Work. |
| 241 | 15 mm dia. medium quality |
| 242 | 20 mm dia. medium quality |
| 243 | 25 mm. thick damp proof with cement concrete (1:1.5:3) (with graded stone aggregate 10 mm. normal size) and painting the top surface with a coat of bitumen [VG.40 ] using 1.7 kg. per sq.m. including heating the bitumen and cost and carriage of all materials complete. [Bitument to be supplied by the Agency] |
| 244 | Excavation for Structures. Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, andbackfilling with approved material complete as per direction of the Engineer-in-Charge. I. In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means........ |
| 245 | a) upto 3 m depth.................................................................... iv) Without pumping out water and shoring(Backfilling to be duly consolidated / tamped) |
| 246 | b) 3 m to 6 m depth.................................................................... iv) Without pumping out water and shoring(Backfilling to be duly consolidated / tamped) |
| 247 | Supplying, fitting and placing HYSD bar reinforcement in Sub-structure including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and direction of Engineer-in-charge. ( Steel Source- Durgapur , Distance-104 Km). |
| 248 | Turfing with chorkata or durba grass sods 5 cm. to 8 cm. thick in slope, crest berm etc. of embankments, canals and drainage channels etc. within a lead of 150 metre and all lifts including fine dressing, watering, ramming, guarding etc. complete. (sods will have to be arranged by the contractor at his own cost. Payment to be made on the grown grass only). |
| 249 | Overhead Signs (only sheet to be placed over existing frame)Providing and erecting overhead signs with a corrosion resistant 2mm thick aluminium alloy sheet reflectorized with high intensity retro-reflective sheeting of encapsulated lens type with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.6 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans (Reference to MORT&H's specification 802). b) Aluminium Alloy Plate for Over Head Sign |
| 250 | Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless SteelGRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Matfinish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx). |
| 251 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. |
| 252 | i) For roof truss works. c) Span beyond 20 Mtr and up to 30 Mtr |
| 253 | Supplying, fitting & fixing Industrial Troughed Aluminium sheet (excluding the supporting frame work) of approved make & brand in alloy 3105 conforming to IS: 1254-1991 fitted and fixed with 75 mm & 25 mm Self tapping screw , EPDM Washer 16 mm dia & 3 mm th washer etc complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work) (Aluminium sheet to be supplied by contractor). b) With 0.71 mm thick sheet. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 18, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 26 daysAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender