Tender For Repair And Maintenance To Certain Furniture At Age (I) Pokaran Under Ge (A) Jaisalmer.
Tender Value
14.84 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
10 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisalmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair And Maintenance To Certain Furniture At Age (I) Pokaran Under Ge (A) Jaisalmer. --Chair Dinning (FD-228, FD-279)M&L for removing of old broken components of chair dinning and S&F new components made out of 1st class hard wood without crack and knots of similar size, shape, planed and fixed with hard wood pinning and fevicol as under:-Front leg as specified in drg.Rear leg as specified in drg.Stiffener as specified in drg.Front/Side/Rear rails of seat incl drilling of holes for caning as specified in drgBack rest as specified in drgM&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of chair dining and as directed by Engr-in-Charge.Chair Easy (FD-171, FD-209, FD-229)
BOQ
| Sl. No. | Item Description |
| 1 | Chair Dinning (FD-228, FD-279) |
| 2 | M&L for removing of old broken components of chair dinning and S&F new components made out of 1st class hard wood without crack and knots of similar size, shape, planed and fixed with hard wood pinning and fevicol as under:- |
| 3 | Front leg as specified in drg. |
| 4 | Rear leg as specified in drg. |
| 5 | Stiffener as specified in drg. |
| 6 | Front/Side/Rear rails of seat incl drilling of holes for caning as specified in drg |
| 7 | Back rest as specified in drg |
| 8 | M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of chair dining and as directed by Engr-in-Charge. |
| 9 | Chair Easy (FD-171, FD-209, FD-229) |
| 10 | M&L for removing of old broken components of chair easy and S&F new component made out of 1st class hard wood without crack and knots of similar size, shape, planed and fixed with hard wood pinning and fevicol as under:- |
| 11 | Front leg as specified in drg |
| 12 | Rear leg as specified in drg |
| 13 | Seat rails as specified in drg. |
| 14 | Back rails as specified in drg. |
| 15 | Arms as specified in drg. |
| 16 | M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of chair easy and as directed by Engr-in-Charge. |
| 17 | Chair Writing (FD-280) |
| 18 | M&L for removing of old broken components of chair writing and S&F new components made out of 1st class hard wood without crack and knots of similar size, shape, planed and fixed with hard wood pinning and fevicol as under:- |
| 19 | Front leg as specified in drg |
| 20 | Rear leg as specified in drg |
| 21 | Stiffener as specified in drg |
| 22 | Front/Side/Rear rails of seat incl drilling of holes for caning as specified in drg |
| 23 | Arms as specified in drg |
| 24 | Back rest as specified in drg |
| 25 | M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of chair writing and as directed by Engr-in-Charge. |
| 26 | COMMON ITEMS FOR CHAIRS ,(FD-FD-17,20,250 & 280) (FD-16,228 & FD- 279) (FD-202, 229) |
| 27 | Removing the existing unserviceable/ broken plastic cane and S&F canning with new plastic cream colour cane 2 mm wide and 0.5mm thick, 4 mm thick for borders for canning of chair of all types including couch with detachable chair, bin soiled linen, stool dressing complete as per Godrej pattern complete all as specified and as directed by the Engineer-in-Charge. |
| 28 | REPAIRS TO SOFA SET 5 SEATER SEAT (FD-281/373) |
| 29 | Replacement of existing foam cushion of Sofa including existing tapestry cloth of sofa set 4/5 seater, and supply & fix new PU Moulded Foam of density 50-55 kg per cubic meter of size 560 x 535 x 100mm thick, duly stitched with tapestry cloth and closed with Velcro of suitable size complete all as shown on drawing and complete all as specified and as directed by the Engineer-in-Charge. Note: The cost of tapestry cloth shall not be less than Rs. 350.00 Per RM. |
| 30 | Replacement of cover of tapestry cloth of cushion of sofa and S&F new cover of tapestry cloth on existing foam cushion with Velcro on one edge of best quality. cloth not less than 350/- per RM, Shade and texture to be got approved before bulk stiching and complete all as specified and as directed by the Engineer-in-Charge. |
| 31 | M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of sofa set 5 seater and as directed by Engr-in-Charge. |
| 32 | Table 900 x 600 x 760 mm with and without drawer FD- 283, & 284 |
| 33 | M&L for removing old unserviceable top and S&F new top of size 900 x 600mm made out of 18 mm thick prelaminated MDF board one side hard face other side white laminated exterior grade (ISI marked) with 4mm thick hard wood beading around fixed with fevicol all as specified in drg. |
| 34 | M&L for removing old unserviceable legs and S&F new legs made out of 1st class hard wood without crack and knots duly finished/ smoothened complete all as specified in drg. |
| 35 | M&L for removing old unserviceable Short rail/bottom side Stiffener and S&F new Short rail/bottom side Stiffener made out of 1st class hard wood without crack and knots duly finished/ smoothened complete all as specified in drg. |
| 36 | M&L for removing old unserviceable front/rear long rails and S&F new front/rear long rails made out of 1st class hard wood without crack and knots duly finished/ smoothened complete all as specified in drg. |
| 37 | M&L for removing old unserviceable bottom middle Stiffener and S&F new bottom middle Stiffener made out of 1st class hard wood without crack and knots duly finished/ smoothened complete all as specified in drg. |
| 38 | M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of table 2'x3' and as directed by Engr-in-Charge. |
| 39 | Table centre , Table Centre two Tier ( FD-274) |
| 40 | M&L for removing of old unserviceable top and S&F new top for table centre made out of prelaminated MDF board 18 mm thick one side hard and otherside white exterior grade (ISI marked) with 4 mm thick hard wood beading around fixed with fevicol all as specified in drg. |
| 41 | M&L for removing of old unserviceable front/rear top rails and S&F new front/rear top rails made out of 1st class hard wood without crack and knots duly finished/smoothened complete as specified in drg. |
| 42 | M&L for removing of old unserviceable top/bottom side rails,and S&F new top/bottom side rails, made out of 1st class hard wood without crack and knots duly finished/smoothened complete as specified in drg. |
| 43 | M&L for removing of old unserviceable legs,and S&F new legs made out of 1st class hard wood without crack and knots duly finished/smoothened complete as specified in drg. |
| 44 | M&L for removing of old unserviceable stiffners in between both side of legs and S & F new stiffners 890 mm x 50 mm x 20 mm made out of Ist class hard wood without crack and knots duly finished/smoothened complete all as specified in drg. |
| 45 | M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of table center 2'x3' and as directed by Engr-in-Charge. |
| 46 | Teapoy Wooden 600 x 450 x 540mm( FD-232, FD-278, FD-382) |
| 47 | M&L for removing old unserviceable top and S & F new top made out of prelaminated MDF board 18 mm thick one side hard face other side white exterior grade (ISI marked) with 4 mm thick hard wood beading around fixed with fevicol all as specified in drg. |
| 48 | M&L for removing of old unserviceable legs and S&F new legs made of 1st class hard wood without crack and knots duly finished/smoothened complete all as specified in drg and as directed. |
| 49 | M&L for removing of old unserviceable front/rear rails, and S & F new front/rear rails, made out of Ist class hard wood without crack and knots duly finished/smoothened complete all as specified in drg. |
| 50 | M&L for removing of old unserviceable bottom side stiffener, and S & F new bottom side stiffener, made out of Ist class hard wood without crack and knots duly finished/smoothened complete all as specified in drg. |
| 51 | M&L for removing of old unserviceable stiffners in between both side of legs and S & F new stiffners 570 mm x 50 mm x 20 mm made out of Ist class hard wood without crack and knots duly finished/smoothened complete all as specified in drg. |
| 52 | M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of Teapoy wooden 600x450x540mm and as directed by Engr-in-Charge. |
| 53 | Peg Table (FD-266, FD-277, FD-384) |
| 54 | M&L for removing old unserviceable top and S & F new top made out of prelaminated MDF board 18 mm thick one side hard face other side white laminated exterior grade (ISI marked) with 4 mm thick hard wood beading around fixed with fevicol and all as specified in drg. |
| 55 | M&L for removing of old unserviceable legs and S&F new leg made out of Ist class hard wood without crack and knots duly finished/smoothened complete all as specified in drg. |
| 56 | M&L for removing of old unserviceable front & rear top rail, and S & F new front & rear top rail, made out of Ist class hard wood without crack and knots duly finished/smoothened complete all as specified in drg. |
| 57 | M&L for removing of old unserviceable bottom side rail, and S & F new bottom side rail, made out of Ist class hard wood without crack and knots duly finished/smoothened complete all as specified in drg. |
| 58 | M&L for removing of old unserviceable stiffners in between both side of legs and S & F new stiffners 450 mm x 40 mm x 40 mm made out of Ist class hard wood without crack and knots duly finished/smoothened complete all as specified in drg. |
| 59 | M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of peg table and as directed by Engr-in-Charge. |
| 60 | REPAIR TO TABLE WRITING (FD- 33, 249 & 275) |
| 61 | Removal of unserviceable top and S&F new top of size 1145mm x 600mm made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003) with 4mm thick Half round Bidding duly polished the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade complete complete all as specified and as directed by the Engineer-in-Charge. |
| 62 | Removal of unserviceable leg and S&F new leg made out of 1st class hard wood as per drawing and complete all as specified and as directed by the Engineer-in-Charge. |
| 63 | Removal of unserviceable knob/handle of drawer from front shutter of cabinet and S&F new trade pattern knob/ handle heavy duty of quality as per sample available as per drawing and complete all as specified and as directed by the Engineer-in-Charge. |
| 64 | Removal of unserviceable drawer and S&F new drawer front and sides made out of 18 mm thick MDF Board exterior grade both side laminated , 6mm thick (BWR Gde)plywood at the bottom of drawer over one set of powder coated telescopic channels to move the drawers all as per drawing and complete all as specified and as directed by the Engineer-in-Charge. |
| 65 | Removal of unserviceable both side purlin for box of table writig & New both of side purlin made out of 18 mm thick MDF Board exterior grade all as per drawing and complete all as specified and as directed by the Engineer-in-Charge. |
| 66 | Removal of unserviceable back of box of table writig & back of box new made out of 18 mm thick MDF Board exterior grade all as per drawing and complete all as specified and as directed by the Engineer-in-Charge. |
| 67 | M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface oo table writing and as directed by Engr-in-Charge. |
| 68 | REPAIR TO TABLE DINING 6/8 PERSON (FD-273/FD-255/FD/MAP-II/03) |
| 69 | Removing the existing unserviceable/ broken top of Table dining 6 person and S&F new top of 1500x900mmx18 mm thick pre-laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 4mm thick Half round Bidding duly polished complete all as specified and as directed by the Engineer-in-Charge. |
| 70 | Removing the existing unserviceable/ broken top of Table dining 8 person and S&F new top of 1800x900mmx18 mm thick pre-laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 4mm thick Half round Bidding duly polished complete all as specified and as directed by the Engineer-in-Charge. |
| 71 | Removing the existing unserviceable/ broken top long rail of Table dining 6 person and S&F new long rail made of 1st class hard wood of size as shown on drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 72 | Removing the existing unserviceable/broken top short rail of Table dining 6 person and S&F new short rail made of 1st class hard wood of size as shown on drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 73 | Removing the existing unserviceable/ broken leg of Table dining 6 person and S&F new leg made of 1st class hard wood all as specified shown on drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 74 | M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface oo table dining 6/8 person and as directed by Engr-in-Charge. |
| 75 | REPAIRS TO CHARPOY GI PIPE PLYWOOD TOP (FD-220) |
| 76 | M&L for tightening of loose charpoys GI after removing of the existing unserviceable ply wood and S&F 12mm thick plywood, BWP grade, conforming to IS :710 ISI marked alongwith two iron stiffeners 900x25x3mm with 08 Nos Nut Bolt complete all as specified and as directed by the Engineer-in-Charge. Make : KITPLY/CENTURYARCHID PLY as approved by GE. |
| 77 | Removing the existing unserviceable / broken long rail 32mm dia and S&F New long rail for charpoy GI Pipe medium grade complete all as specified and as directed by the Engineer-in-Charge. |
| 78 | Preparing short rail from broken long rail obtained from Serial item No 12.02 above and fixing for charpoy GI pipe complete all as specified and shown on drawing including removing the existing broken/ unserviceable short rail complete all as specified and as directed by the Engineer-in-Charge. |
| 79 | Preparing leg of GI Charpoy made from old long/short rail obtained from Serial item No 12.02 & 12.03 above and welding 3mm thick base plate to the bottom of the leg and preparing MNF clamp holes as per existing complete all as specified and as directed by the Engineer-in-Charge. |
| 80 | S&F GI 3 way elbow 32mm bore, ISI marked, length not less than 65mm in each way including dismantling of old GI elbow complete all as specified and as directed by the Engineer-in-Charge. |
| 81 | S&F GI check nut, 5mm thick suitable for 32mm GI pipe (ISI Marked) including dismantling of unserviceable check nut complete all as specified and as directed by the Engineer-in-Charge. |
| 82 | Preparing the existing steel surfaces by scrapping with sand paper and painted with two coats of synthetic enamel paint of silver colour over a coat of red oxide primer complete all as specified and as directed by the Engineer-in-Charge. |
| 83 | Locker Bedside steel (FD-1029) |
| 84 | Replacement of existing unserviceable handle by providing new Mild Steel chromium plated handle of standard size for Locker steel best quality as approved complete all as specified and as directed by the Engineer-in-Charge. |
| 85 | S&F New Hasp & staple for Locker bedside steel including removing the existing unserviceable complete all as specified and as directed by the Engineer-in-Charge. |
| 86 | Removing unserviceable legs and S&F New leg of locker bed side steel made of 1mm thick CRCA sheet bend to shape duly painted including one coat of red oxide primer and fix with Gas welding as shown on drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 87 | Removing unserviceableof hanging pipe of locker S&F New hangin pipe of locker bed side steel made of 1mm thick 25mm dia steel as per drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 88 | Removing of old paint completely from surfaces of Locker bedside steel internally and externally including shelves (Top & bottom) by No 50 sand paper and wire brush and applying putty on the patch and rubbing with sand paper No 150 to make surface even thereafter applying one coat of red oxide primer and applying a coats of synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 89 | REPAIRS TO ALMIRAH STEEL LARGE/ MEDIUM (FD-67M, 1031) |
| 90 | Replacement of existing unserviceable handle by providing new Mild Steel chromium plated handle of standard size including nuts and washers of Almirah large/medium steel best quality as approved complete all as specified and as directed by the Engineer-in-Charge. |
| 91 | S&F New 75mm 6 lever lock with brass levers & stainless steel keys in duplicate fixed with suitable screws, welding as required for Almirah large/Medium steel including removing the existing unserviceable lock complete all as specified and as directed by the Engineer-in-Charge. |
| 92 | Removing unserviceable legs and S&F New leg of Almirah large steel made of 1mm thick CRCA sheet bend to shape duly painted including one coat of red oxide primer and fix with Gas welding as shown on drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 93 | All as per serial item No. 14.03 here-in-before above but leg of Almirah medium steel. |
| 94 | Removing unserviceable 3 way locking device from Alimarh large steel and fixing New locking device complete all as specified and as directed by the Engineer-in-Charge. |
| 95 | All as per serial item No. 14.05 here-in-before above but of Almirah medium steel. |
| 96 | M&L for welding of thickness not exceeding 6mm and length not exceeding 2.5cm for foot rest of almirah large steel by gas welding wherever required complete all as specified and as directed by the Engineer-in-Charge. |
| 97 | Removing of old paint completely from surfaces of Almirah large steel internally and externally including shelves (Top & bottom) by No 50 sand paper and wire brush and applying putty on the patch and rubbing with sand paper No 150 to make surface even thereafter applying one coat of red oxide primer and applying a coats of synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 98 | All as per serial item No. 14.08 here-in-before above but of Almirah medium steel. |
| 99 | Table Office Clerk Steel {FD-84(M) & FD-1004} |
| 100 | M&L for removing old u/s tops from Table office clk steel and S&F new top made out of 18mm thick pre-laminated MDF board exterior grade (ISI marked) one side Hard wood face & other side white with 4mm thick Hard wood wood beading all around, all as specified in drg & as directed by Engr-in-charge. |
| 101 | Removing of old unserviceable lock from existing table office clk steel and S&F new lock all as specified in drg & directed by Engr-in-charge.. |
| 102 | Removing of old unserviceable drawer from existing table office clk steel and S&F new Drawer all as specified in drg & directed by Engr-in-charge.. |
| 103 | Table Office Officer Steel {FD-84(M) & FD-1003} |
| 104 | M&L for removing old u/s tops from Table office officer steel and S&F new top made out of 18mm thick pre-laminated MDF board exterior grade (ISI marked) one side Hard wood face & other side white with 4mm thick Hard wood wood beading all around, all as specified in drg & as directed by Engr-in-charge. |
| 105 | Removing of old unserviceable drawer from existing table office clk steel and S&F new drawer all as specified in drg & directed by Engr-in-charge.. |
| 106 | Removing of old unserviceable lock from existing table office officer steel and S&F new lock all as specified in drg & directed by Engr-in-charge.. |
| 107 | CONVERSION OF CHAIR CBA STEEL WITH ARMS INTO CHAIR CBA STEEL CUSHIONED (FD-75M) |
| 108 | Removing the existing unserviceable/ broken seat for chair CB steel with arms and S&F New Seat of size 450 x 390 mm complete with frame made out of 12mm thick plywood duly pasted with 50/55 mm PU Foam covered with leatherite tapestry cloth pattern dark brown/Red/Choclate colour not less than Rs. 350/RM . The seat frame to be bolted to the MS tublar frame of the chair by four 75mm long screw complete all as specified and as directed by the Engineer-in-Charge. |
| 109 | All as per serial item No. 7.01 here-in-before above but for back of chair CB steel with Arms. |
| 110 | Removing the existing unserviceable/ broken Arm rest for chair CB steel with arms and supply and fix new Arm rest of made of hard wood duly pasted with 50/55 mm PU Foam covered with leatherite tapestry cloth complete all as specified and as directed by the Engineer-in-Charge. Note :- Each Arm rest measured separately |
| 111 | S&F 02 Nos MS plate of size 450mm X 25mm X 3 mm thick duly welded on two seat pipe for support to seat of chair CB steel complete all as specified and as directed by the Engineer-in-Charge. |
| 112 | Preparation of steel surfaces of chair tubular steel with arms and applying two coats of synthetic enamel paint of approved colour complete all as specified and as directed by the Engineer-in-Charge. |
| 113 | S&F new shoe of chair complete all as specified and as directed by the Engineer-in-Charge. |
| 114 | Table Dining ORs {FD-165(M) |
| 115 | M&L for removing of old u/s top of Table Dining OR and S&F new top made out of 18mm thick block board with 22 gauge aluminim sheet, all as specified in drg & as directed by Engr-in-charge. |
| 116 | M&L for one coat of synthetic enamal paint black to table dining OR after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified & directed by Engr-in-charge. |
| 117 | REPAIRS TO BED HARD TOP STEEL (FD/MAP/E6/08(R) |
| 118 | Removing the existing unserviceable /broken ply wood top and supply and fixing New 12 mm thick BWP Grade conforming to IS: 710 plywood top ISI marked alongwith 06 in Nos Countersunk screws and washers on three stiffeners all as shown on Drawing and complete all as specified and as directed by the Engineer-in-Charge. |
| 119 | Removing the existing unserviceable shoe and S&F new PVC shoe in leg of Bed Hard as per existing pattern complete all as specified and as directed by the Engineer-in-Charge. |
| 120 | Removing existing Head Board of Bed hard steel and S&F new cushioned Head Rest of size 1150x900mm. The Head Rest Unit shall be made up of 38x38mm CRCA Square pipe of 18 gauge wall thickness. 18x18mm square CRCA pipe in the middle for support and 25x25mm square CRCA pipe at the bottom. The main bed frame where the Head board frame shall be bolted shall be 65x25mm CRCA pipe. The Head Board frame shall be slightly bend at 70 degree as shown in the drg. The frame to be powder coated with black colour. The Headboard shall be fixed with 12 mm thick plywood of BWP grade and pasted with PU Foam 75mm thick 32 density duly covered with composite tapestry of leatherette chocolate or any other shade approved by GE. The cushioned headrest to be curved at the top. The complete frame unit to be bolted with the short rail main frame as shown in the drg complete all as specified and as directed by Engineer-in-charge. The New frame to be fixed with nut and bolt by providing necessary arrangement including fixing of new iron cMS plate and holes for bolt. |
| 121 | Preparation of steel surfaces of Bed Hard steel and applying two coats of synthetic enamel paint of approved colour complete all as specified and as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender