Tender For Special Repair To Cpl And Below At 19 Fbsu Under Ge (Af) Thoise
Tender Value
44 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
12 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
LADAKH → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Cpl And Below At 19 Fbsu Under Ge (Af) Thoise
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Jul-2026 | BoQ Amendment | BOQ | 01-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing debries out side defence area complete all as specified and directed. |
| 2 | M&L for Non - skid coloured Ceramic tiles (400x400mm) 7 to 8 mm thick , dark shade (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed 15mm thick in screed bed (1:4) base, complete all as specified. |
| 3 | M&L for coloured glazed ceramic tiles (300x 450x 7mm thick) in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster 1:4 complete all as specified and as directed. |
| 4 | M&L Non Skid ceramic joint free coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, over and including15 mm thick screed bed in cm 1:4 in floors etc. set and joint free in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr in Charge. |
| 5 | Demolition of reinforced cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level all as directed and specified. |
| 6 | M&L for precast RCC 1:2:4 Type B1 using (20 mm stone aggregate)Set in CM 1:6 as in landings, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including form work etc all as directed and specified.Note-: Steel reinforcement shall be measured & paid separately. |
| 7 | M&L for TMT steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) n.less than 0.9mm dia complete.all as specified directed. |
| 8 | Demolition of cement concrete in floors and pavings n. exc 15 cm thickness below or above ground level, complete all as specified and directed |
| 9 | Material and labour for 40 mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floors complete all as specified and directed. |
| 10 | Material and labour for 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded mechanically crushed stone aggregate) as in plinth protection finished surfaces even and smooth without using extra cement and joint will be filled by mix of 85/25 bitumin and sand complete all as specified and directed. |
| 11 | Dismentling wall and ceiling board or insulation boards any thickness including cover fillets complete all as specified and directed. |
| 12 | M&L for 9 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed in ceiling complete all as specified and directed. |
| 13 | M&L for 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 14 | Dismentling timber frame, framed work as in fillets, rails, posts, purlins, etc under 40 sqcm in section complete all as specified and directed. |
| 15 | M&L for second class wrought hard wood plain fillets, square, rectangular or triangular in section, sectional area 6 sqcm but n exc 13 sqcm, secure with screws, complete all as specified. |
| 16 | Plugging to walls in repair complete for wood fillets, grounds moulding, etc. on cement concrete walls, at distance n. exc 1 mtr, complete all as specified and as directed by Engr-in-Charge. |
| 17 | M&L 3mm thick Cover fillets of tempered hard board, 40mm wide and fixing with screws complete all as specified and directed. |
| 18 | Dismantling of wall and Ceiling boards (fibre, pulp insulation, etc) or insulation boards /slabs /blankets, any thickness, including cover fillets, complete all as specified and as directed by Engr-in-Charge. |
| 19 | S&F in repair Anodised aluminium snap grid frame work of size 605 x 605 mm for false ceiling, complete all as specified and as directed by Engr-in-Charge. |
| 20 | S&F in repairs hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long complete all as specified and as directed. |
| 21 | M&L for 12 mm thick gypsum board in ceiling fixed with screws as per manufactureres instruction, complete all as specified and as directed by Engr-in-Charge. |
| 22 | S & F in repair laminated wood flooring in size 1214mm x 193mm x 8mm thick, including skirting, floor brakers etc, as per manufacutred instruction with a layer of foam backing, complete all as specified and as directed. |
| 23 | Taking down chowkats or frames with shutter (without taking off shutter from the frames), area not exceeding 1.5 Sqm each and removal from site including iron mongry hold fasts etc., complete all as specified. |
| 24 | Taking down Shutters of any description exc 1sqm but not exc 2sqm area and removal from site etc complate all as specified and as direct by engr in charge. |
| 25 | S&F flush shutters, 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides incl taking down complete all as specified and as directed |
| 26 | Supply & fixing factory made PVC door frame of wall thickness of 5 mm made out of extended 5 mm rigid PVC plain sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member), complete all as specified. |
| 27 | Supply & fixed Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 with particle board core raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as directed. |
| 28 | M&L for preparing new or previously untreated wood based surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of finishing coat with synthetic varnish and all as specified and as directed. |
| 29 | Aluminium (Diecast) body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutter of 851 to 1000mm in width complete all as specified and directed. |
| 30 | S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised .complete as specified and directed . |
| 31 | S&F 200mm long aluminium anodised barrel tower bolts of extruded section .complete as specified and directed . |
| 32 | Supply & fixing 250 mm aluminum anodised sliding door bolts, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified. |
| 33 | S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, 100mm long complete all as specified and directed. |
| 34 | S&F in repair powder coated aluminium fixed louvered ventilator, frame of section 63.5mm X 38.1mm X 1.01 mm or appropriate equivalent section with 4 mm thick figured/frosted sheet glass with rubber gasket,Aluminium wire mesh, handles, locking arrangement etc incl making good jambs, cills etc and complete all as specified and directed by the Engr-in-Charge.Make: Hindalco/Indal/Jindal or equvalent) |
| 35 | S&F in repair powder coated aluminium sliding window of 3 track frame of section 62mm X 32mm X 1.47 mm or appropriate equivalent section and shutters of section 18 mm X 44 mmX 1.35 mm or appropriate equivalent section fixed with 4 mm thick tinted sheet glass with rubber gasket, handles, locking arrangement and aluminium wire mesh,aluminium powder coated any colour deco grill 6mm dia incl making good jambs, cills etc complete all as specified and directed by the Engr-in-Charge.Make: Hindalco/Indal/Jindal or equvalent. |
| 36 | S&F powder coated aluminium frame & shutters side hung type of section 18 mm X 44 mmX 1.35 mm or appropriate equivalent section fixed with 4 mm thick tinted sheet glass with rubber gasket, handles, locking arrangement and aluminium wire mesh,aluminium powder coated any colour deco grill 6mm dia incl making good jambs, cills etc complete all as specified and directed by the Engr-in-Charge.Make: Hindalco/Indal/Jindal or equvalent) |
| 37 | Taking down rain water/soil waste & vent pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed by Engr-in-Charge. |
| 38 | S&F PVC SWR pipes single socketed, in any length, 110 mm dia, with rubber ring joints laid in trenches or in floors, complete all as specified and directed. |
| 39 | S&F PVC SWR pipes single socketed, in any length, 75 mm dia, with rubber ring joints laid in trenches or in floors , complete all as specified and directed. |
| 40 | S&F 110mm PVC(SWR) bends any radius, with/without oval access door, complete all as specified and directed. |
| 41 | S&F 75mm PVC(SWR) bends any radius, with/without oval access door, complete all as specified and directed. |
| 42 | S&F 110mm PVC (SWR), Junction single, (Single T) equal or unequal), fixed with solvent cement,with/without oval access door, complete all as specified and directed. |
| 43 | S&F 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 44 | S&F 100mm PVC (SWR),PVC (SWR) vent cowl, fixed with solvent cement, complete all as specified and directed. |
| 45 | S&F in repairs PUF Insulated tank capacity 1000 Litres,including ball valve complete all as specified and as directed by Engr-in-Charge. |
| 46 | Taking down GI/PVC/PP-R pipe of size 20 bore and connection including cleaning for refixing or removal to store complete, all as specified & directed. |
| 47 | S&F 20 mm bore 3-layer PP-r Polytheyene random copolymer conceled pipes SDR 7.4 (PN-16) UV stabalised and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypro-pylene complete to walls celling or in floor including making good disturbed surfraces of wall, floor roof complete all as specified and directed. |
| 48 | S&F in repairs chromium plated fancy type 15 mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 49 | Supply only 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 50 | Supply & fixing in repairs 15mm Stop valves, fancy type Chromium plated, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete, all as specified & directed by Engineer-in-charge. |
| 51 | Supply & fixed in repair vitreous china wash hand basin white flat back of size 550x440mm including CI brackets and PVC connection 450 mm long having PTMT nuts and chromium plated waste coupling and making good to disturbed portion including 32 mm dia PVC waste pipe and pedestal etc complete all as specified. |
| 52 | S&F in repairs soap dish any type, fixed to plugs with chromium plated brass screws complete all as specified. |
| 53 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified. |
| 54 | S&F in repairs vitreous China squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including PCC (1:2:4) type B-1) for fixing of WC and making good floor to match the existing surface, complete all as specified and as directed by Engr-in-Charge. |
| 55 | S&F sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed. |
| 56 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 57 | S&F in repairs 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engineer-in-Charge. |
| 58 | S &F in repair Tubular towel rail, 20mmdia, D type, 60cm long between flange all as specified and as directed by Engr in Charge. |
| 59 | S&F in repair aluminium powder coated curtain rod of 20mm dia decorative type all as specified and as directed by Engr in Charge. |
| 60 | S&F in repair Brackets Aluminium anodies for curtain rod 20mm dia all as specified and directed. |
| 61 | S&F in repair for 5mm thick transparent Perspex sheet fixing to aluminium frame /iron frame/wooden frame etc with self tapping screws/bolts etc complete all as specified and directed. |
| 62 | M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base, complete all as specified and as directed by Engr-in-Charge. |
| 63 | Demolition of pre-cast cement concrete block walling built in cement mortar complete all as specified and directed by Engineer-in-Charge. |
| 64 | M&L for providing precast cement concrete block of PCC (1:3:6) type-C1 in masonry with solid blocks, exceeding 10cm in width & set in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 65 | Taking down cement plaster on brick wall/concrete surfaces etc including racking out joints hacking for key scrubing down with water etc of any thickness including Dado any description complete all as specified and directed by Engineer-in-Charge. |
| 66 | M&L for 15 mm thick rendering in CM 1:4 on fair face of brick/concrete surface and finished even and smooth without using extra cement incl taking down cement plaster on brick or stone walls etc, raking out joints, hacking for key scrubbing down with water etc all as specified. |
| 67 | M&L for 10 mm thick rendering in CM 1:6 on face of brick/concrete surface and finished even and smooth without using extra cement incl taking down cement plaster on brick or stone walls, raking out joints, hacking for key scrubbing down with water etc all as specified. |
| 68 | M&L for preparation of newly plastered surface of walls including Chalk whiting, on plastered surfaces, prepara-tory to distempering and applying two coat of oil emulsion distemper on wall surface, complete all as specifed. |
| 69 | M&L for preparation of new decorated plastered surface of walls etc brooming down with steel wire brushing, scrapping down smoke soot, moulds mass and efforescent salts trading oils etc & greasy spots including concrete plasters etc and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over camouflaging pattern and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specifed. The pattern of camouflaing shall be approved by GE. |
| 70 | M&L for complete removal of existing treatment on plastered or unplastered surface of walls etc brooming down with steel wire brushing, scrapping down smoke soot, moulds mass and efforescent salts trading oils etc & greasy spots including concrete plasters etc and applying Two coat of oil bound distemper on wall surface over one coat of chalk whiting on plaster surface, preparatory to distemper, complete all as specified and directed by Engr-in-charge. |
| 71 | M&L for complete removal of existing treatment plastered or unplastered surface of walls etc brooming down with steel wire brushing, scrapping down smoke soot, moulds mass and efforescent salts trading oils etc & greasy spots including concrete plasters etc and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over camouflaging pattern and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmcomplete all as specifed. The pattern of camouflaing shall be approved by GE. |
| 72 | M&L for complete removal of existing steel surface of any description exceeding 10cm in width and girth and applying two coat of synthetic enamel paint as in camouflaging pattern over wall and roof of bldg etc over a coat of red/pink primer, complete all as specified and directed and directed by Engr-in-charge.Note: The pattern of camouflaing shall be approved by GE. |
| 73 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern roof covering etc complete all as specified and directed. |
| 74 | S&F 0.63 mm thick Galvanised, corrugated mild steel shetting with two corrugations side lap, fixed with coach screws, washers, and L - type or J-type or cranked hook bolts in lieu of screw in roof sheeting, walls etc. with grade of zinc coating 275 etc complete all as specified and directed and directed by Engr-in-charge. |
| 75 | S&F 0.63 mm thick plain Galvanised, mild steel shetting in ridges, hips, vally gutters, drip, straight flashing & fixed with coach screws, washers, and L-type or J-type or cranked hook bolts in lieu of screw in roofs, walls etc. (length and girth as fixed) with grade of zinc coating 275 etc complete all as specified and directed and directed by Engr-in-charge. |
| 76 | M&L for preparation of new zinc (or galvanised) comouflage pattern surfaces to receive painting, by a coating with mordant solution including washing and cleaning and applying two coat synthetic enamel paint over a coat of zinc crome, red oxide etc all as specified. |
| 77 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 78 | M&L for mild steel for wind ties for roof including securing bolts, screwing etc. & for doors, balusters, nosing to steps including embeding in concrete and posts and struts including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 79 | M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161- 1979 grade St-240 complete all as specified and directed. |
| 80 | M&L for preparation of new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 81 | Taking out carefully copper/aluminium point wiring,Light,fan,socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floorscomplete all as specified and directed. |
| 82 | Taking down distribution boards/wooden board ,switch fuse units,steel enclosures for MCB of any type and removing from site all as specified and as directed by the Engineer in charge. |
| 83 | Taking down existing unserviceable submain wiring any size and making good the disturbed surface all as specified and as directed. |
| 84 | Material and labour for point wiring for one light controlled by one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type for mounting of modular switches, sockets, fan regulators alongwith modular plate etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface all as specified and as directed. |
| 85 | All as per Srl item No 84.00 above but for one fan point controlled by one piano switch all as specified and as directed. |
| 86 | All as per Ser item No 84.00 hereinbefore but for one 3 pin socket outlet 5 Amp Same board all as specified and as directed. |
| 87 | All as per ser item No 84.00 hereinbefore but for one 3 pin socket outlet 5 Amp on independent board all as specified and as directed. |
| 88 | All as per Item no 84.00 here-in-before but for one15 Amp 3pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire all as specified and as directed. |
| 89 | Supply and fix modular type switch, one way 6 Amps , 1 module complete all as specified and directed. |
| 90 | Supply and fix modular type switch, one way 16 Amps, 1 module complete all as specified and directed. |
| 91 | Supply and fix modular type socket 5 pin, 6 Amps 2 module complete all as specified and directed. |
| 92 | Supply and fix modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and directed. |
| 93 | Supply & fix Gangbox, 3 module complete all as specified. |
| 94 | Supply & fix Gangbox, 6 module complete all as specified. |
| 95 | Supply & fix Gangbox, 8 module complete all as specified. |
| 96 | Supply and fix in repairs of Ceiling rose surface bakelite three terminals 240 volts complete, all as specified. |
| 97 | Supply and fix in repairs Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings ,complete, all as specified. |
| 98 | S&F LED Bulb cool white 10 Watt Elegant design direct fit for easy installation all as specified and directed. |
| 99 | Supply and fix in replacement of Tube light fitting integrated type suitable for LED 20W indoor decorative aluminium extruded LED batten complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed. |
| 100 | Supply and fix in repairs factory made epoxy powder coated Distribution board SPN 12 ways (SPN MCB DB) with metal door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing complete all as specified. |
| 101 | Supply and fix in repairs factory made epoxy powder coated Distribution board SPN 12 ways (SPN MCB DB) with metal door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing complete all as specified. |
| 102 | Supply and fix in replacement MCB SP-06 to 32 Amp,10KA, 240 volts complete all as specified. |
| 103 | Supply and fix in replacement of MCB SPN 32 Amp, 240 volts 50Hz AC supply, complete all specified. |
| 104 | Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 6 sqmm and one single core PVC insulated (unsheathed) solid copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement moter 1:3 and making good disturbed surface complete all as specified and as directed. |
| 105 | M&L in repair for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to GI earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dia and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) and pouring extra Clay Soil of qty not less than one cubic meter into the earth pit and also removal of excavated soil not less than 50 mtr from the earthing place all as specified and directed and tested on completion. including testingall as specified and directed by E-in-Charge. |
| 106 | Supply and fixing LED Bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with suitable size and length of 1.5 sqmm copper conductor with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 107 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site and as directed complete all as specified and directed. |
| 108 | Taking down old unsv XLPE 1100 volts grade of size 25 sqmm 3.5 core complete all as specified and directed. |
| 109 | M&L for screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 2 Core, including glands, lugs, nut, bolts, washers as required at site, testing complete all as specified and directed. |
| 110 | Excavation in trenches not exceeding 1.5 metres wide and not exceeding1.5 metres in depth and getting out in any type of soil complete all as specified. |
| 111 | Returning, filling in, including spreading , leveling , watering and well ramming in layer not exceeding 25cm each layer all as specified. |
| 112 | Removing excavated material not exceeding 50M and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified. |
| 113 | Sand cushioning to underground cables provided with a layer of sand 8cm thick before laying the cable in trenches and 15cm thick after laying the cable in trenches complete all as specified. |
| 114 | S & F for GI tubing meduim grade of 40 mm dia laid in trenches or under ground/floor or road of fixed with pole for protection of cable including clams with bolts nuts and wasers complete ass as specifed. |
| 115 | M&L for precast cbale cover class LV Type-1 Flat size 250x150x40mm laid flat in trenches over the cable with length 250mm perpendicular to the directoin of calbe , adjacent /abutting each other comlete all as specified and directed. |
| 116 | Supplying and laying 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches of 25mm dia complete all as specified and directed. |
| 117 | Supplying and laying 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches of 20mm dia complete all as specified and directed. |
| 118 | PP-R Gate valves (brass insert) of 25mm bore as per requirement of the site complete all as specified and directed. |
| 119 | PP-R Gate valves (brass insert) of 20mm bore as per requirement of the site complete all as specified and directed. |
| 120 | Cutting existing 80/100/150 mm GI pipe and inserting GI Tee of size 100x100x50 mm for tapping including necessary earth work and making flange for connection of new 50 mm of GI pipe including all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 01, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 12 daysAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender