Tender For Repairs / Maintenance Of Internal Electrification, Fittings And Fixtures, Flame Proof Light/ Fittings/ Dbs, Earthing Including Connected Accessories Of Otm At Site ‘E Of Naval Base Area, Karwar.
Tender Value
44.80 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
18 days left
EMD
89600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Uttara Kannada → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs / Maintenance Of Internal Electrification, Fittings And Fixtures, Flame Proof Light/ Fittings/ Dbs, Earthing Including Connected Accessories Of Otm At Site ‘E Of Naval Base Area, Karwar.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendants, regulators, sockets, etc can be measured separately) removing the material from wall/ceiling etc, removing materials from site and making good the disturbed surfaces of walls, floors etc as per existing specification and taken as credit complete all as specified and as directed by the Engineer-in-Charge. |
| 2 | M&L for point wiring with one light controlled by one switch , 1100 Volts grade, 1.5 Sqmm PVC insulated FRLSH unsheathed cable with multi-stranded copper conductor conforming to IS:694:1990 with ISI marking, drawn through existing conduit, including all accessories in wall/ceiling/floor/roof etc., and sunk pressed steel or cast iron terminal boxes with 3 mm thick plastic laminated sheet top cover; including 1.5 Sqmm PVC insulated FRLS unsheathed 1100 Volts multi-stranded copper conductor as continuous earth wire connected to common earth dolly, all as specified and directed |
| 3 | M&L for point wiring with one fan point controlled by one switch , 1100 Volts grade, 1.5 Sqmm PVC insulated FRLSH unsheathed cable with multi-stranded copper conductor conforming to IS:694:1990 with ISI marking, drawn through existing conduit, including all accessories in wall/ceiling/floor/roof etc., and sunk pressed steel or cast iron terminal boxes with 3 mm thick plastic laminated sheet top cover; including 1.5 Sqmm PVC insulated FRLS unsheathed 1100 Volts multi-stranded copper conductor as continuous earth wire connected to common earth dolly, all as specified and directed |
| 4 | M&L for point wiring with One 3 pin socket outlet 5 Amp on same board with other switches, 1100 Volts grade, 1.5 Sqmm PVC insulated FRLSH unsheathed cable with multi-stranded copper conductor conforming to IS:694:1990 with ISI marking, drawn through existing conduit, including all accessories in wall/ceiling/floor/roof etc., and sunk pressed steel or cast iron terminal boxes with 3 mm thick plastic laminated sheet top cover; including 1.5 Sqmm PVC insulated FRLS unsheathed 1100 Volts multi-stranded copper conductor as continuous earth wire connected to common earth dolly, all as specified and directed |
| 5 | M&L for point wiring with One 3 pin socket outlet 5 Amp on independent board,1100 Volts grade, 1.5 Sqmm PVC insulated FRLSH unsheathed cable with multi-stranded copper conductor conforming to IS:694:1990 with ISI marking, drawn through existing conduit, including all accessories in wall/ceiling/floor/roof etc., and sunk pressed steel or cast iron terminal boxes with 3 mm thick plastic laminated sheet top cover; including 1.5 Sqmm PVC insulated FRLS unsheathed 1100 Volts multi-stranded copper conductor as continuous earth wire connected to common earth dolly, all as specified and directed |
| 6 | M&L for point wiring One light point controlled by one switch using approved colour coding as per IS (Red, Black and Green for single phase circuits) with 1.5 sqmm nominal cross sectional area, copper conductor unsheathed FRLSH cable 1100 Volts grade IS-694 marked with valid CML No. single core multistranded cable in and through PVC casing and caping and accessories IS marked with valid CML No (IS-9573-1983 for conduits and IS: 3419: 1976 for conduit accessories) and with modular switch boxes and PVC modular cover plate of suitable size for fixing of switches sockets and fan regulators etc. including 1.5 Sqmm nominal cross sectional area PVC insulated copper conductor unsheathed FRLS cable single core multistranded cable as earth continuity wire and making disturbed surface matching with existing surface all as specified and as directed. |
| 7 | M&L for point wiring One fan point controlled by one switch using approved colour coding as per IS (Red, Black and Green for single phase circuits) with 1.5 sqmm nominal cross sectional area, copper conductor unsheathed FRLSH cable 1100 Volts grade IS-694 marked with valid CML No. single core multistranded cable in and through PVC casing and caping and accessories IS marked with valid CML No (IS-9573-1983 for conduits and IS: 3419: 1976 for conduit accessories) and with modular switch boxes and PVC modular cover plate of suitable size for fixing of switches sockets and fan regulators etc. including 1.5 Sqmm nominal cross sectional area PVC insulated copper conductor unsheathed FRLS cable single core multistranded cable as earth continuity wire and making disturbed surface matching with existing surface all as specified and as directed |
| 8 | M&L for point wiring One 3/5 pin socket outlet 6 Amp on same board with other switches. using approved colour coding as per IS (Red, Black and Green for single phase circuits) with 1.5 sqmm nominal cross sectional area, copper conductor unsheathed FRLSH cable 1100 Volts grade IS-694 marked with valid CML No. single core multistranded cable in and through PVC casing and caping and accessories IS marked with valid CML No (IS-9573-1983 for conduits and IS: 3419: 1976 for conduit accessories) and with modular switch boxes and PVC modular cover plate of suitable size for fixing of switches sockets and fan regulators etc. including 1.5 Sqmm nominal cross sectional area PVC insulated copper conductor unsheathed FRLS cable single core multistranded cable as earth continuity wire and making disturbed surface matching with existing surface all as specified and as directed |
| 9 | All as per item No.8 above but One 3 pin socket outlet 5 Amp on independent board. |
| 10 | All as per item No.8 above but with cables 2.5 Sqmm for one 3 pin socket outlet 15 Amps on independent board |
| 11 | All as per item No. 8 above but with cables 4 Sqmm for one 3 pin socket outlet 15 Amps on independent board |
| 12 | S&F in repair of Switch piano type 5 Amp single pole one way complete all as specified and directed. |
| 13 | S&F in repair of Switch piano type 5 Amp single pole two way complete all as specified and directed. |
| 14 | S&F in repair switch socket combination, 3 pin along with gang box 5 amp flush type white/Black colour complete all as specified and directed. |
| 15 | S&F in repair switch socket combination multipurpose along with gang box 3 pin 15 Amp and 3 pin 5 amp flush type 2 in 1 complete white/Black colour all as specified and directed. |
| 16 | S&F in repair one module switch modular type, single pole one way 6/10 Amps 230 Volts ISI Marked white/Black colour all as specified and as directed by the Engineer-in-Charge. |
| 17 | S&F in repair one module switch modular type, single pole one way 16 Amps 230 Volts ISI Marked white/Black colour all as specified and as directed by the Engineer-in-Charge. |
| 18 | S&F in repair socket two module type 6 Amps, 3 pin , 230 Volts ISI Marked white/Black colour all as specified and as directed by the Engineer-in-Charge. |
| 19 | S&F in repair socket two module type 6/16 Amps, twin socket , 3 pin , 230 Volts ISI Marked white/Black colour all as specified and as directed by the Engineer-in-Charge. |
| 20 | S&F in repair ceiling rose surface Bakelite min dia 35mm three terminal complete all as specified and directed. |
| 21 | S&F in repair of cover plate 1module white/Black colour with inner frame |
| 22 | S&F in repair of cover plate 2module white/Black colour with inner frame |
| 23 | S&F in repair of cover plate 4 module white/Black colour with inner frame |
| 24 | S&F in repair of cover plate 8 module with inner frame horizontal/vertical type |
| 25 | S&F in replacement modular blank plate white/Black colour , one module 240 volts,50 Hz all as directed. |
| 26 | S&F LED base building security luminaire 45 Watt with pressure die cast aluminium housing with Poly carbonate cover and high power LEDs and secondary lenses with IP 66 Protection including 40x6mm flat iron clamps, nut, bolts, washer with 32 mm dia GI pipe light grade bracket bend to shape not less than 1.2 m long including taking down complete all as specified and directed. |
| 27 | Taking down the old unserviceable SK fitting/ FTL fitting/ lamp holder and taken as credit and supply and fixing LED batten tube light fitting with aluminium housing & integrated housing suitable for fixing on wall & surface of 20 watt capacity & 4 feet complete with all electrical connection all as specified and directed by Engineer-In-Charge. |
| 28 | Taking down the old unserviceable SK fitting/ FTL fitting/ lamp holder and taken as credit and supply and fixing LED batten tube light fitting with aluminium housing & integrated housing suitable for fixing on wall & surface of 10 watt capacity & 2 feet complete with all electrical connection all as specified and directed by Engineer-In-Charge. |
| 29 | S&F in repair of T8 LED tube rod, 18/20 Watt, 4 feet length, 6000K colour temperature, complete with all accessories, all as specified and directed. |
| 30 | S&F LED Bulb type B22 of 9 watts complete all as specified. |
| 31 | S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings. For LED Lamp all as specified and as directed as per Engineer-in-charge. |
| 32 | S&F in repairs decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base including 9W lamp complete all as specified and directed. |
| 33 | Taking down submain wiring cable of any size/type along with earth wire with or without concealed/surface conduit/casing caping complete all as specified and directed. |
| 34 | M&L For Sub main wiring with 2.5 sqmm (Nominal area) with two runs of single core cable PVC insulated FRLS multistrand unsheathed copper conductor cable including 1100 V grade, drawn through existing Conduit including 2.5 sqmm (nominal area) single core PVC insulated multistrand unsheathed copper conductor as earth wire and duly connected to all common earth point all as Specified and directed by Engr-in-Charge. |
| 35 | M&L for sub main wiring with 4.0 sqmm (Nominal area) with two runs of single core cable PVC insulated FRLS multistrand unsheathed copper conductor cable including 1100 V grade, drawn through existing Conduit including 4.0 sqmm (nominal area) single core PVC insulated multistrand unsheathed copper conductor as earth wire and duly connected to all common earth point all as specified and directed by Engr-in-Charge. |
| 36 | M&L for sub main wiring with 2.5 sqmm (Nominal area) with two runs of single core cable PVC insulated FRLS multistrand unsheathed copper conductor cable including 1100 V grade, drawn through PVC casing and caping conduit including 2.5 sqmm (nominal area) single core PVC insulated multistrand unsheathed copper conductor as earth wire and duly connected to all common earth point all as Specified and directed by Engr-in-Charge. |
| 37 | M&L for sub main wiring with 4.0 sqmm (Nominal area) with two runs of single core cable PVC insulated FRLS multistrand unsheathed copper conductor cable including 1100 V grade, drawn through PVC casing and caping including 4.0 sqmm (nominal area) single core PVC insulated multistrand unsheathed copper conductor as earth wire and duly connected to all common earth point all as Specified and directed by Engr-in-Charge. |
| 38 | M&L for submain wiring with 2 single core 6 Sqmm PVC insulated unsheathed multistranded copper conductor cable, FRLS cable 1100 volt grade drawn through and including PVC surface conduit complete except beam and RCC roof and one run of 6Sqmm PVC insulated unsheathed single core 1100 volts grade multistranded copper conductor cable as earth continuity conductor and connecting with suitable size thimble complete all as specified and as directed by Engineer-in-Charge. Note: two run of 6sqmm size PVC cable , one run of 6 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length. |
| 39 | M&L for submain wiring with 2 single core 10 Sqmm PVC insulated unsheathed multistranded copper conductor cable, FRLS cable 1100 volt grade drawn through and including PVC surface conduit complete except beam and RCC roof and one run of 10Sqmm PVC insulated unsheathed single core 1100 volts grade multistranded copper conductor cable as earth continuity conductor and connecting with suitable size thimble complete all as specified and as directed by Engineer-in-Charge. Note: two run of 10 sqmm size PVC cable , one run of 10 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length. |
| 40 | S&F in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required complete all as specified and directed by Engr-in-charge. |
| 41 | S&F in replacement Stepped modular type electronic fan regulator 120 W 2 module suitable with existing sheet for 1200 /1400 mm sweep fans complete. |
| 42 | S&F Sheet metal enclosure 4 way DB, Single pole and neutral with 200 Amps rated bus bar,230 volts double door type including connecting all connections of wire to MCBs with proper lugs & arrangements, making good to the disturbed surface including taking down existing DB all as specified and directed. |
| 43 | S&F Sheet metal enclosure 8 way DB ,Single pole and neutral with 200 Amps rated bus bar,230 volts double door type including connecting all connections of wire to MCBs with proper lugs & arrangements, making good to the disturbed surface including taking down existing DB all as specified and directed. |
| 44 | S&F Sheet metal enclosure 12 way DB, Single pole and neutral with 200 Amps rated bus bar,230 volts double door type including connecting all connections of wire to MCBs with proper lugs & arrangements, making good to the disturbed surface including taking down existing DB all as specified and directed. |
| 45 | S&F Sheet metal enclosure 4 way DB ,Triple pole and neutral with 200 Amps rated bus bar,415 volts double door type including connecting all connections of wire to MCBs with proper lugs & arrangements, making good to the disturbed surface including taking down existing DB all as specified and directed. |
| 46 | S&F Sheet metal enclosure 8 way DB ,Triple pole and neutral with 200 Amps rated bus bar,415 volts double door type including connecting all connections of wire to MCBs with proper lugs & arrangements, making good to the disturbed surface including taking down existing DB all as specified and directed.. |
| 47 | S&F in replacement of VTPN distribution box 4 way, AC, TP & neutral metal enclosure, double door, 415V AC, concealed type with suitable bus bar, neutral link, earth link suitable for MCCB, as incomer and MCB,SP as out going after taking down existing DB all as specified and directed. |
| 48 | S&F in replacement of VTPN distribution box 8 way,, AC, TP & neutral metal enclosure, double door, 415V AC, concealed type with IP-43 protection complete with suitable bus bar, neutral link, earth link suitable for MCCB 125/150Amps as incomer and MCB, SP as out going after taking down existing DB all as specified and directed. |
| 49 | S&F in replacement sheet metal enclosure with Single pole enclosure with a two pin and earth plug and socket complete with one single pole MCB with 20 Amps after taking down existing. |
| 50 | S&F in replacement MCCB, 4 pole, 415 volt AC, 63 amps, fixed type with breaking capacity 16KA all as specified. |
| 51 | S&F in replacement MCCB, 4 pole, 415 volt AC, 100 amps, fixed type with breaking capacity 16KA all as specified. |
| 52 | S&F in replacement MCB TPN 25-63 Amps 4 Pole, with breaking capacity 16 KA along with replacement of old unserviceable one complete all as specified and directed. |
| 53 | S&F in replacement MCB TPN 16-32 Amps 4 Pole, with breaking capacity 16 KA along with replacement of old unserviceable one complete all as specified and directed. |
| 54 | S&F in replacement MCB TPN 40-100 Amps 4 Pole, with breaking capacity 16 KA along with replacement of old unserviceable one complete all as specified and directed. |
| 55 | S&F in replacement MCB SPN 240 Volts 40 to 63 Amp breaking capacity 10 KA along with replacement of old unserviceable one complete all as specified. |
| 56 | S&F in replacement MCB SPN 240 Volts 32 Amp breaking capacity 10 KA along with replacement of old unserviceable one complete all as specified. |
| 57 | S&F in replacement MCB SP 240 Volts 5 to 32 Amps breaking capacity 10 KA along with replacement of old unserviceable one complete all as specified and directed. |
| 58 | M&L for taking down & overhauling of ceiling fan any size and make, dismantling parts, properly cleaning/removing old existing grease oil and removing old paint from blades and body including down rods complete. Applying new oil grease, varnishing of winding, cleaning dust, rust and applying one coat white enamel paint using mechanical spray (maximum working pressure of 3300 PSI) over a coat of steel primer, assembling and refixing at site complete all as specified. |
| 59 | M&L for taking down & overhauling of Exhaust fans/wall mounted fans/pedestal fans any size and make, dismantling parts properly cleaning/removing old existing grease oil and removing old paint from blades. Applying new oil grease, varnishing of winding, cleaning dust, rust, assembling and refixing at site complete all as specified. |
| 60 | M&L for taking down ceiling fan, removing the old burnt motor, and replacing the conventional motor with a BLDC motor suitable for operation with regulator/remote, including electronic circuit, blades, down rod, canopy, and all necessary connecting items, complete all as directed. |
| 61 | M&L for taking down & repairing of Exhaust fans/Wall mounted fans of any make and any sweep dismantling its parts cleaning properly, rewinding with super copper enamelled wire suitable gauge, varnishing, oiling and greasing replacing petti items such as split pins, assembling and testing after fixing of fan blades, refixing at site with required plywood and connecting complete. |
| 62 | Note for Item No.61 :- Worn out/damaged parts such as canopy, rubber bush, capacitors, and Gun metal bushes, ball bearing shall be measured and paid separately as S&F under relevant items of Sch 'A'. |
| 63 | M&L, in replacement, of gun metal bush of any type and size of ceiling fan/ exhaust fan/ Wall fans. |
| 64 | M&L in replacement for ball bearing for ceiling fan 1200/1400 mm sweep |
| 65 | M&L in replacement for ball bearing for Exhaust fan 150/200/300/350/450 mm sweep |
| 66 | M&L in replacement for ball bearing for Wall mounted fan 380/400/450mm sweep |
| 67 | M&L in replacement, for 2.5 mfd capacitor, 230 volts, AC + 5% complete all as specified |
| 68 | M&L in replacement, for 4 mfd capacitor, 230 volts, AC + 5% complete all as specified |
| 69 | M&L in replacement, of PVC / metallic clamp for holding capacitor of any type/ size all as directed. |
| 70 | M&L for replacement of MS fan down rod 1 feet for holding ceiling fan complete all as specified and directed by Engr-in-charge. |
| 71 | M&L for replacement of MS fan down rod 2 feet for holding ceiling fan complete all as specified and directed by Engr-in-charge. |
| 72 | S&F wooden frame of thickness 6 mm of suitable size for fixing of exhaust fan in existing hole including all nut/bolts complete all as specified and directed by Engineer-in-Charge. |
| 73 | S&F in replacement cup made of plastic complete with nut bolt for fixing in position suitable for ceiling fan 1200mm/1400mm sweep |
| 74 | S&F in replacement blade suitable for 1200mm sweep Ceiling fan complete all as directed. |
| 75 | S&F in replacement blade suitable for 1400mm sweep Ceiling fan complete all as directed. |
| 76 | S&F Bollard light, New generation, energy saving, environmental friendly, long life of size Height 900 mm, Diameter 120 mm, Base plate 160 mm aesthetically designed aluminium landscape IP 65 luminaire for diffused lighting with 8W, 3000K high power LED as light source, Providing and laying PCC 1:2:4 (M15) foundation of size 300×300×450 mm with sand bedding, conduit provision, foundation bolts, curing and finishing for mounting bollard light including all materials and labour, complete all as specified and directed by Engr-in-Charge. Make : Havells cat part No- BAMBOOBL8WLED857SSYMTOPCM / Equivalent in Wipro/CG |
| 77 | S&F in repair new generation, post top lantern or garden light fitting 20 W LED, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire complete all as specified and directed by Engr-in-Charge. |
| 78 | S&F in repair XLPE insulated, galvanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor,1100 volts grade, cross sectional area 10 sq mm 2 core including taking down old unserviceable cable complete all as specified and directed by Engr-in-charge |
| 79 | Supply and laying galvanised iron tubing, light grade of size 40 mm dia with all fittings as in cable protection, laid in trenches, including taking down existing unserviceable GI pipes & its connections complete all as specified and directed by Engr-in-Charge. |
| 80 | Demolition of un-reinforced cement concrete in road and paving's not exc 15 cm thickness (below or above ground level) |
| 81 | M&L for PCC 1:2:4 type B2 ( 40mm graded crushed stone aggregate) as in road filling as specified and directed. |
| 82 | M&L for testing of resistance of earth pits of transformer/panels/ buildings or any other indicated place etc after testing report will be furnished to Engr-in Charge in standard format approved by Engr-in Charge. |
| 83 | S&F in repairs of flameproof rotary switch with LM6 termination box, 16A, single-pole, 250V, complete all as specified and directed. |
| 84 | S&F in repairs of flameproof switch socket and plug combined unit with cable termination box, made of LM6 alloy, 16A, 250V, 2P+Earth, complete all as specified and directed. |
| 85 | S&F in repairs of flameproof rotary switch with LM6 termination box, 16A, double-pole, 250V, complete all as specified and directed. |
| 86 | S&F in repair of flameproof LED light fitting, 2 x 20 Watt, CMRI certified, suitable for gas/vapour group IIA & IIB, Zone 1 & 2 hazardous areas, with IP65 protection rating with die-cast aluminium housing and heat-resistant toughened glass, prewired with LED tubes, driver, holders and connectors, including all accessories and connection with suitable size three-core flexible copper conductor cable, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 87 | S&F in repair of flameproof LED light fitting, 2 x 20 Watt, CMRI certified, suitable for gas/vapour group IIA & IIB, Zone 1 & 2 hazardous areas, with IP65 protection rating with die-cast aluminium housing and heat-resistant toughened glass, prewired with LED tubes, driver, holders and connectors, including all accessories and connection with suitable size three-core flexible copper conductor cable, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender