Tender For Special Repair (Seepage Treatment) Of Inspection Bunglow, Adityapur, Repair, Denting & Painting Work Of 41 Nos. Of Almirah, 27 Nos. Of Table, 10 Nos. Of Chairs Of Kcc Adityapur & Kcd Adityapur & Provision Of Work Stations In Rooms Under Kc
Tender Value
11.20 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
11 days left
EMD
22500
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Saraikela Kharsawan → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair (Seepage Treatment) Of Inspection Bunglow, Adityapur, Repair, Denting & Painting Work Of 41 Nos. Of Almirah, 27 Nos. Of Table, 10 Nos. Of Chairs Of Kcc Adityapur & Kcd Adityapur & Provision Of Work Stations In Rooms Under Kcc Adityapur & Kcd Adityapur With All Office Accessories Including 01 No. Of Computer System And Laser Printer.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and Laying APP(Atactic Polypropelene Polymers)modified prefabricated five layer,3 mm thick water proofing membrane ,black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @0.40 litre/sqm by the same membrane manufactured of density at 25 deg C , 0.87 to 0.89kg/lit and viscosity 70-160 cps . Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc , and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under joint strength in longitudinal and transverse direction at 23 deg C as 350 /300 N/5cm . Tear strength in longitudinal and transverse direction as 60/80 N. Softening point of membrane not less than 150 deg C , cold flexibility shall be upto - 2 deg C whwn tested in accordance with ASTM D -5147. The laying of membrane shall be got done through the authorised appicator of the manufacturer of membrane :3mm thick DSR 14.90.1 |
| 2 | Ceiling Fluted PVC profile False Ceiling (Profile Size :10'x0'8\\") Rate as per Quotation |
| 3 | Providing and Pasting Superfil CP-706/Crackseal Paste or equivalent chemical in cracks with the help of spatula and filled surface should be levelled. Before filling paste Crack surface must be cleaned from loosely held particles, paint residues, oil, greasy substaces etc.Special care should be taken that no entrapped bubbles or cavity should be there. Second coat of superfil CP-706/Crack Seal should be applied over the 1st coat only after 2 hours. This treatment is best suitable for filling gaps upto 5 mm thick and deep. BCD 5.11.12 |
| 4 | Providing two coat of plastic emulsion paint of approved shade and make over old surface including washing, cleaning and preparring the walls, scafolding, washing of floor and taxes all complete as per building specification and direction of E/I. BCD 5.8.20 |
| 5 | Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including the cost of scaffolding all complete as per direction of E/I.BCD 5.8.9 |
| 6 | Extra for each coat of washing over exterior surface for each consecutive floor above first floor including scaffolding etc. all complete as per direction of E/I.BCD 5.8.10 |
| 7 | Supplying fitting and fixing 20 mm thick solid core type non decorative double leaf flush shutters in cupboards with black board core blended with high quality phenol formaldehyde synhetic resin both side commercial veneered of standard make with oxdised iron fittings BCD 5.4.46 |
| 8 | Providing Ply wood partition upto 2.5M. height with 4mm thick commercial ply wood of standard make fitted and fixed both sides over sal wood frame of 50x50mm posts at 122cm.centres and 3nos. 50x50m m horizontal members including cost of anchoring the partition to floors and walls properly and providing 2 coats of synthetic enamel paint over a coat of priming of approved shade and make and leaving space for doors if necessary all complete as per drawings on and direction of E/I. BCD 5.4.47 |
| 9 | Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc. with EPDM rubber /neoprene gasketetc. complete as per the architectural drawings and the directions ofengineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness (weight notless than 20 kg/sqm) DSR 21.3.3 |
| 10 | Providing & Fixing decorative high pressure laminated sheet of plain/wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S, including cost of adhesive of approved quality: Sunmica DSR 9.127.1 |
| 11 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : DSR 21.1.1 For fixed portion DSR 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 12 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) DSR 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 13 | Provuiding and fixing glazing in Aluminium door , window , ventilator , shutters and partitions etc with EPDM rubber / neoprene gasket etc complete as per the architectural drawings and the directions ofv E/I (cost of aluminium snap beading shall be paid in basic items ) DSR 21.3.1 with float glass panes of 4.00 mm thickness (weight not less than 10 kg/ sqm) |
| 14 | Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete Powder coated minimum thickness 50 micron aluminium 21.15.2 DSR |
| 15 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width 21.8.1 DSR |
| 16 | Painting of Steel Almirah Size 78\\"x34\\"x19\\" As per Quotation |
| 17 | Painting of Steel Almirah Size 66\\"x34\\"x19\\" As per Quotation |
| 18 | Painting of Steel Almirah Size 50\\"x30\\"x17\\" As per Quotation |
| 19 | Painting of Steel Center table As per Quotation |
| 20 | Providing fitting and fixing Maingate lock of steel Almirah including removal of old and damaged lock. As per Quotation |
| 21 | Providing fitting and fixing Handle of steel Almirah (Godrej Type) including removal of old and damaged handle. As per Quotation |
| 22 | Providing fitting and fixing new Leg (1 pair) including removal of damaged leg of Steel Almirah. As per Quotation |
| 23 | Denting of Steel Almirah, Steel Center Table, Steel Chair etc. as per requirement. As per Quotation |
| 24 | HP AIO-PC CR0271IN (Ryzen 5, 16 GB RAM, 512 GB SSD, Window 11, MS Office ) As per Quotation |
| 25 | HP PRINTER 126 A (Print Scan Copy) As per Quotation |
| 26 | Double Bed Bedsheet Stripe As per Quotation |
| 27 | Pillow Cover (18\\"x26\\") As per Quotation |
| 28 | Cushion Cover (20\\"x20\\") As per Quotation |
| 29 | Add GST @ 18% |
| 30 | Add L. Cess @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender