Tender For Repair And Maintenance Of Public Health Services In House No. 255 (Type-Viii), Sector-16, Chandigarh. (Under maintenance Booth Sector-16). (Ch To: 2216 (N.P.) maintenance And Repair )
Tender Value
3.34 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
1 days left
EMD
6691
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Public Health Services In House No. 255 (Type-Viii), Sector-16, Chandigarh. (Under maintenance Booth Sector-16). (Ch To: 2216 (N.P.) maintenance And Repair )
BOQ
| Sl. No. | Item Description |
| 1 | Brick work with common burnt clay F.P.S. (non plinth level up to floor V level in all shapes and sizes in : |
| 2 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 3 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 4 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 5 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete |
| 6 | Flexible pipe |
| 7 | 32 mm dia |
| 8 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. (EXPOSED) |
| 9 | 20 mm dia nominal bore |
| 10 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 11 | 15 mm dia nominal bore |
| 12 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality |
| 13 | 20 mm Nominal bore |
| 14 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 15 | 20 mm |
| 16 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 17 | 45 cm length |
| 18 | 15 mm nominal bore |
| 19 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 20 | 15 mm nominal bore |
| 21 | 20 mm nominal bore |
| 22 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank DSR 18.48 |
| 23 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 24 | 15 mm nominal bore |
| 25 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.DSR 18.51.1 |
| 26 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 27 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 28 | 15mm nominal bore |
| 29 | Cutting holes up to 30x30 cm in walls including making good the same |
| 30 | With common burnt clay F.P.S. (non modular) brick |
| 31 | Providing and fixing Angular Stop Cock Make Jaquar Range Opal Model OPL-15053 or equivalent model of approved make to the satisfaction of EIC |
| 32 | Providing and fixing Table top wash basin make Jaquar JDS-WHT-25935 with cp waste complete or equivalent model of approved make to the satisfaction of EIC |
| 33 | Providing and fixing of C.P. Towel Ring Square with round flange complete, make Jaquar range Continental Model ACN-1121N or equivalent model of approved make to the satisfaction of EIC |
| 34 | Providing and fixng of CP brass soap dishmake Jaquar / continental ACN -1131 N or equivalent model of approved make to the satisfaction of EIC |
| 35 | Providing anf fixing of CP cup heavy duty complete in all respect as per entire satisfaction and approval of make by EIC. |
| 36 | Providing and fixing mirror of superiorglass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats steel studs complete in all respect |
| 37 | Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) size 4\\" dia of approved make |
| 38 | Provd & fixing of C.P. Towel Rail 450 mm long make Jaquar Continental Model ACN-1111BNM or equivalent model of approved make to the satisfaction of EIC |
| 39 | Providing and fixing of Overhead Shower 125mm dia Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System Make jaquar OHS-1989 or equivalent model of approved make to the satisfaction of EIC |
| 40 | Providing and fixing of Shower Arm 300mm long Round Shape for Wall Mounted Showers with Wall Flange Make Jaquar SHA-479L300S or equivalent model of approved make to the satisfaction of EIC |
| 41 | Providing and fixing Wall mixer 3 in 1 with provision for both hand shower and overhead shower with connecting leg complete make Jaquar FLR 5281N or equivalent model of approved make to the satisfaction of EIC |
| 42 | Providing and fixing of CP toilet paper holder make Jaquar Continental Model ACN 1151 N or equivalent model of approved make to the satisfaction of EIC |
| 43 | Providing and fixing of CP tumbler holder make Jaquar Continental Model ACN 1141 N or equivalent model of approved make to the satisfaction of EIC |
| 44 | Providing and fixing of Glass corner self make Jaquar Continental Model ACN- 1173 or equivalent model of approved make to the satisfaction of EIC |
| 45 | Providing and fixing of single lever basin mixture without pop up waste system with 450 mm long braid complete make Jaquare OPAL PRIME 15011BPM or equivalent model of approved make to the satisfaction of EIC |
| 46 | Providing and fixing of sink mixture with swinging spout on upper side wall mounted model with connecting legs and wall flanges make Jaquare floratine FLR 53090N or equivalent model of approved make to the satisfaction of EIC |
| 47 | Providing and fixing of sink cock with swinging spout on upper side wall mounted model with connecting legs and wall flanges make Jaquare floratine FLR -5347N or equivalent model of approved make to the satisfaction of EIC |
| 48 | P/F of chinaware One Piece Floor Mount EWC complete with Cistern, Seat Cover and Twin Flush Fittings of make CERA Model CRUSE/CAMBELL (Seat 2038/2099, Cistern 2118, Seat Cover 2328B, Twin Flush Fitting 2218 ) or equivalent model of approved make to the satisfaction of EIC |
| 49 | Providing and fixing of colour WHB (630x450mm) and Pedestal of M-cera make with C.I brackets 32mm C.P. brass waste of approved make as per standard pattern including cutting and painting of brackets and making good the walls CAT No. 1022 & 1121 (Concord with Pedestal) or equivalent model of approved make to the satisfaction of EIC |
| 50 | Supplying and fixing of Monoblock pump set 1 H.P. make Crompton with required platform and electricla wire complete in all resects or equivalent model of approved make to the satisfaction of EIC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender