Tender For repair maintenace Of Toilet Block In Adm Block At Karahali (Bn Hq Of 142 Bn Bsf (Now 103 Bn Bsf) Under Shq Bsf Chennai (Providing electrical installation And Exhaust Fans)
Tender Value
1.49 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
4 days left
EMD
2999
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Rural → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for repair maintenace Of Toilet Block In Adm Block At Karahali (Bn Hq Of 142 Bn Bsf (Now 103 Bn Bsf) Under Shq Bsf Chennai (Providing electrical installation And Exhaust Fans)
BOQ
| Sl. No. | Item Description |
| 1 | LED Batten light (System lumen efficacy >135 lm/Watt). Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency > 85% ,Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P.F.≥0.95, IP20, CRI >80, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours 47DELHI SCHEDULE OF RATES (E&M)-2025with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/Embossing/ Screen printing on housing complete in all respect i/c external connections with 1.5 sqmm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) - (a) 36 Watt |
| 2 | Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends ,CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as 44DELHI SCHEDULE OF RATES (E&M)-2025 required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) 8.8.1 15 watt E - (a) 36 Watt |
| 3 | Supplying and fixing following Modular type switch on the existing switch box/cover including connections etc. as required.(5/6 amps switch) |
| 4 | Supplying, installing, testing and commissioning of pre wired 10 watts LED mirror fittings complete with electronic driver and all accessories directly on existing wall including connection etc. as required( Make Havells Item Code No.LUMILINEPLUSNEOBS10WLED865SPCSSINDS or equivalent specifications from any other make i.e CG/Wipro/ Philips/Jaguar) |
| 5 | Supplying, installation, testing & commissioning of Surface mounting type 24W LED square(1'x1') shape down lighter fitting with all accessories etc. as required.(Make Crompton model No. LCTLSNE-24-FO-CDL (1x1) or equivalent makes 1'x1' Surface mounting fitting (Havells, Phillips, Bajaj) by removing the existing fittings. |
| 6 | Supplying, installation, testing & commissioning of Surface mounting type 36W LED square(1'x4') shape fitting with all accessories etc. as required.(Make BAJAJ model No. BZRSLL 36L LED GX WH SD(1'x4') or equivalent makes 1'x4' Surface mounting fitting (Crompton, Phillips, HAVELSj) by removing the existing fittings. |
| 7 | Supplying, installing, testing and commissioning of LED Glass T8 tube (LGT8) with in built driver and efficacy of 100 lm/W. LED Aluminium T8 tube (LTT8) with in built driver and efficacy of 100 lm/W.LGT8-20-865-2 CG/HAVELS/PHILIPS/BAJAJ) etc. as required |
| 8 | Supplying, installing, testing and commissioning of 10 watt LED bulk head all accessories directly on existing wall including connection etc. as required .( Havells Item CodeRUGBYGENXFTS10WLED865SSYMBO PC or equivalent specifications from any other make i.e CG/Wipro /Philips/Jaguar) |
| 9 | Supplying, installing, testing and commissioning of 300 mm Metallic heavy duty exhaust fan 1400 RPM on the existinng opening including connection etc. as required .( Havells item code no.Havells TURBO FORCE 1P Grey FHEHDSPDB120 or equivalent specifications frrom any other make i.e CG/Wipro/Philips/Jaguar) make |
| 10 | Supplying, installing, testing and commissioning of 250 mm plastic body exhaust fan on the existinng opening including connection etc. as required Ventil Air DX .( Havells/CG/Orient/Usha ) make |
| 11 | Supplying and fixing following rating, TPN 63 AMPS 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.(63 Amp) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender