Tender For Replacement Of Windows And Doors, Waterproofing On Roof And Repair Of Floor, Sunshed Etc In Dsc Line At Iol Estate, Dehradun
Tender Value
49.88 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
7 days left
EMD
99800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Windows And Doors, Waterproofing On Roof And Repair Of Floor, Sunshed Etc In Dsc Line At Iol Estate, Dehradun
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Aug-2026 | TOD ext | Date | 19-Aug-2026 |
| 2 | 20-Aug-2026 | TOD extention | Date | 31-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutter ( without taking of shutter) not exc. 1.5 sq. m each. |
| 2 | Taking down chowkhats or frames with shutter ( without taking of shutter) exc. 1.5 sq. m but not exc. 4 sq. m each. |
| 3 | Taking down of shutters of any description exc 1 sq m but not exc 2 sq. m each. |
| 4 | Cutting holes in brick walls in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portin in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required in depth of exc. Half brick but not exc one brick. |
| 5 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded. |
| 6 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded. |
| 7 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 8 | Sheet glass of thickness 3 mm, ordinary quality and glazing with oil putty/silicon in exc 0.5 sq. m in each pane. |
| 9 | S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples. |
| 10 | Rendering 15 mm thick cement plaster in ratio 1:4 on fair faces of brick work or concrete surface to be finished even and smooth (without using extra cement) . |
| 11 | Preparation of new plastered unplastered wall surface and applying Ist coat and subsequent coat (Two Coat) of distemper oil emulsion (Oil Bond Distemper) on walls complete all as specified and directed. |
| 12 | Mild steel barrel tower bolts 100 mm, stove enamelled black, with bright bolt and fixed. |
| 13 | Prepration of new steel surface of any description over 10 cm grith or width and applying two coat of synthetic enamel (ordinary tint) after priming with red oxide zink chrome. |
| 14 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-290 (Gde E 165). |
| 15 | Prepration of new wooden surface of any description over 10 cm grith or width and applying two coat of synthetic enamel (ordinary tint) after one coat of primer. |
| 16 | S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides. |
| 17 | S&F 30 mm Glazed/skeleton shutters of 1st class soft wood, open rebated and prepared to receive plywood, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing Plywood and wire cloth , etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. (Rate shall be included for 9 mm plywood and Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm.) |
| 18 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 19 | Mild steel sliding door bolts 200 mm, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed. |
| 20 | Mild steel barrel tower bolts 150 mm, stove enamelled black, with bright bolt and fixed. |
| 21 | Butt hinges of size 100 mm, heavy weight, cold rolled mild steel, and fixed. |
| 22 | S&F Mild steel pressed handles 150 mm, ovaltype, stove enamelled black. |
| 23 | S&F Extruded aluminium alloy handles of 100 mm, fabricated type, anodised. |
| 24 | S&F 100mm Aluminium anodised, barrel tower bolts of extruded section and fixed. |
| 25 | M&L for Brickwork with old size sub-class 'B' bricks straight or curved on plan exc 6 m mean redius built in 1:6 cement mortar. |
| 26 | Providing and set in cement mortar 1:4 precast reinforced cement concrete type B1 1:2:4 (20 mm graded aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces. |
| 27 | Mild steel deformed or twisted bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 28 | Cement concrete 100 mm thick, type B- 2, 1:2:4 (40mm graded aggregate)in sub floor/sub-base/floor/paving. and Finishing cement concrete surface even and smooth without using extra cement. |
| 29 | Demolition of unreinforced Cement Concrete of any description and in any position not otherwise specifically provided for. |
| 30 | Glass dividing strips 28 mm width, 3 mm thick and inserted in position, conform to design. |
| 31 | Providing, Plain cement concrete B0, 1:2:4 (12.5 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, coping etc. |
| 32 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and Brushing neat cement slurry with 3.0kg of cement per sq. metre. |
| 33 | M&L Screed bed or bedding layer of mortar 20 mm thick of ratio 1:4 for laying floor finishes. |
| 34 | APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified, make Asian/STP/Dr.Fixit/IWL/SIKA including prepration and primer coat on surfaces laying by authorised applicator before laying of membrane & applying one coat al. paint over the surface of APP membrane. |
| 35 | Removing building materials etc. to a distance of 500 m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination. |
| 36 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 37 | Excavating in soft/loose soil in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pire holes etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out and Returning, filling in soil including spreading, levelling, watering and well ramming in in layers not exc 25 cm ofter laying of pipes etc. |
| 38 | Cutting into existing manholes for 100 mm internal dia pipe for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required. |
| 39 | PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors. |
| 40 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in sunshad of windows or doors to wall, fixed with self tapping screws as specified. |
| 41 | Credit(-) old (unservicable) wooden/flush/pannelled/PVC door of size 1.4 to 2 sqm with existing sliding/tower bolts and handle. |
| 42 | Credit (-) old/unserviceable dismentled steel wondow frame/grills/window shutter/door frame etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 19, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 31, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender