Defence Statutory Bodies & Commissions/Committees Closing in 4 days TDR #56446527

Tender For Repair/Maint Of Sewage Line, Septic Tank And Connected Items For Marrried Acccn For Pb Enclave, Chinar Complex And Adjoining Area Age B/R-I Under Ge (N) Udh Ur

Issued by Statutory Bodies & Commissions/Committees · Udhampur, Jammu and Kashmir
Tender Value
40 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
4 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Udhampur → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair/Maint Of Sewage Line, Septic Tank And Connected Items For Marrried Acccn For Pb Enclave, Chinar Complex And Adjoining Area Age B/R-I Under Ge (N) Udh Ur

BOQ

Name of Work:- REPAIR/MAINT OF SEWAGE LINE, SEPTIC TANK AND CONNECTED ITEMS FOR MARRRIED ACCCN FOR PB ENCLAVE, CHINAR COMPLEX AND ADJOINING AREA AGE B/R-I UNDER GE (N) UDH UR
Sl. No. Item Description
1Systematically cleaning of the sewage lines by passing ropes, Knots, bamboo/wire/kandi rotary cleaner etc for any type of dia of sewage pipe, complete all as specified and as directed by Engr-in-Charge.
2Cleaning and desludging of manholes (excluding first manhole) of any size, shape and any depth including pumping out liquid waste if any, removing all solid waste materials such as stones, bricks, pipes, plastic etc, pluggings/ diverting of flow if required and removing the debries outside MD land etc including all precautionary and safty measures all as directed.
3Cleaning and desludging of existing mini septic tank or Manholes of capacity n exc 10 Users and including inlet and outlet chambers and soakage well, taking out sludge in any form alongwith all other foreign materials by mechanical equipment or by way of other suitable means , and removing waste material/sludge ( desludging n exc 0.5 cum and dewatering n exc 0.5 cum from each septic tank) etc to a distance n.exc 50 mtr including digging , burrying in ground Complete all as specified.and as directed, Note :-(i) Work shall be done in foul conditions , necessary precautionary measures/equipments to be adopted by the contractor .(ii) The solid or semi solid sludge shall be burried in pits and fully covered with a layer of lime powder and earth. (iii) Rates quoted by the contractor shall be deemed to have considered all such contingencies including removal and refixing man hole covers. (iv) Any damage caused during cleaning shall be made good by the contractor to the entire satisfaction of Engr-in-Charge without any extra cost to Govt.
4All as per item no 3.00 here in before but 100 users capacity ( desludging n exc 12.0 cum and dewatering n exc 12 cum from each septic tank) complete all as specified.
5Excavation in trenches in any type of soil not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc or for shafts, manholes, pier holes etc n.exc 10 sqm on plan and not exc 1.50m in depth and getting out in any type of soil, complete all as specified and directed by the Engr-in-charge.
6M&L for HDPE DWC (Double wall corrugated) pipes confirming to IS-16098, Part-II, DN/ID- 150mm of presure rating SN-8 fixed with rubber seal and coupler required with and including suitable bends 90/60/45 degree etc single Y junction, complete as required fixed as per manufacturer instruction laid in trenches for sewage lines all as specified and as directed. Note :- Rates included for pipe, bends any size and type, Y Jn coupler /adaptor etc required and net total length of pipe with fittings shall be measured for payment purpose.
7M&L for Reinforced concrete hume pipes 450 mm dia, class NP3, laid and jointed complete with collars in trenches and tested complete all including demolition of existing pipe as specified and directed.
8M&L for Reinforced concrete hume pipes 600 mm dia, class NP3, laid and jointed complete all including demolition of existing pipe as specified and directed.
9M&L for cement concrete in 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundation bed for laying of sewage lines or mass concrete, Concrete bed to drain pipes of 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested in , complete all as specified and as directed by Engr-in-Charge.
10Plain cement concrete 1:4:8 (Using 40mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and as directed.
11Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed by the Engr-in-charge.
12Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 mabove the starting pointcomplete all as specified and directed by the Engr-in-charge.
13M&L Providing cement concrete 1:2:4 type B-1 ( Using 20 mm graded crushed stone aggregate ) as in coping, etc including necessary formwork as required upto four storey building complete all as specified and as directed by the Engr-in-charge.
14Taking down cement or cement lime plaster on brick or stone walls etc of any description including racking out joints hacking for key scrubbing down with water and removing of debrish to outside MoD land etc complete all as specified and as directed.
15M&L for 15 mm thick cement plaster on the fair face of brick or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement,all as specified and directed by the Engr-in-charge.
16M&L for Cement concrete 1:3:6 type C-2 ( Using 40 mm graded crushed stone aggregate ) as in surface channel or drain including necessary form work etc, complete all as specified and as directed by the Engr-in-charge.
17Mild steel TMT bars 8 mm dia as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia all as specified
18Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
19M & L pre-cast RCC M-30 (factory made) in cover slabs for man holes with plain faces finished fair and smooth etc, set in CM 1 : 4 and including necessary formwork if required, complete all as specified and directed. Note: Reinforcement shall be measured and paid separately.
20Dismantling of wrought iron or mild steel dia work of any description complete all as per specified and directed by Engr-in-Charge.
21Mild steel framed work for grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 upto four storey height bldgs , complete all as specified and as directed.
22Dismantling/ taking out of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches/wall upto & incl of internal dia of pipe 100/75 mm, all as specified and directed by the Engr-in-charge.
23S&F 100 mm dia Cast iron spun soil pipes, waste and vent pipes in any length with or without ears with cement joints, laid in trenches or in floors all specified and directed by the Engr-in-charge.
24S&F 100 mm dia Cast iron spun pipes, waste and vent pipes, in any length with or without ears with cement joints, fixed to wall with MS clamps above but refixing only (except pipe) etc, complete all as specified and as directed by Engr-in-Charge.
25S&F 75 mm dia Cast iron spun pipes, waste and vent pipes, in any length with or without ears with cement joints, fixed to wall with MS clamps above but refixing only (except pipe) with stack clamp, etc, complete all as specified and as directed by Engr-in-Charge.
26S&F 100 mm bore CI vent cowl including taking down old CI vent cowl of any type.
27Ditto all as per Item no 26.00 here in before but 75mm.
28Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories).
29S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with neceaasry PVC bend and MS clamps, all as specified and directed by the Engr-in-charge.
30All as per item no 29.00 here in before but as in refixing only with stack clamp to wall complete all as specified and as directed.
31S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, all as specified and directed by the Engr-in-charge.
32Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles upto four storey building , complete all as specified and as directed. .
33Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 metre mean radius, using old size bricks, built in cement mortar 1:6 , complete all as specified and as directed. .
34All as per item No. 33.00 here in before, but except bricks. Note-Old bricks obtained against dismantling shall be used.
35Prepration of new plaster surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant cement base primer on wall surfaces complete all as specified and directed.
36Complete removing existing treatment upto 4 storey bldg including scraping,removing all mud,cake with wire brush and gunny bags from old plastered surfaces and preparation of surfaces by using necessary filling compound of Altek/Birla white putty exterior grade to obtain smooth/even finish using sand paper and applying two coats of first quality exterior grade wheather proofing acrylic emulsion paint as per manufacturers instructions of any shade and colour over a coat of alkali resistant cement based priming paint complete all as specified and directed.
37Demolition of cement concrete (un reinforced) in ground floor and paving n/exe 15 cm thickness (below or above ground level) complete all as specified and as directed.
38M&L for 50mm thick, PCC 1:3:6 type C1 (using 20mm graded stone aggregate) in plinth protection finished even & smooth with out using extra cement including making joints 10mm wide and 30mm deep at spacing not more than 2.5m and at corners as mandatory and filled with sealing compound grade A complete all as specified and directed.
39S&F chequered cement concrete tiles exc 0.04 Sqm and n exc 0.16 Sqm 20mm thick, set jointed and pointed in neat cement slurry in floors for external use laid over and including 15mm thick screed bed or bedding layer in CM (1:4) and pointed in coloured tiles grout to match the shade of tiles, complete all as specified and directed by Engineer-in-charge.
40Dismantling floor, heart or wall tiling including Cement Mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
41M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed.
42M&L for Glazed digital ceramic coloured tiles 600mm x300mm x 7 to 8 mm thick,sharp edged (joint free), in vertical surfaces such as walls, skirting etc , set to match over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
43S & F factory made, natural stone finish tiles of size 600 mm x 300 mm x 9 to 10mm thick and pattern as directed by Engr In Charge for external use sharp edged in vertical surfaces such as walls, skirting etc , set to match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
44S&F in repair Looking mirror of size 600x600mm with bevelled edges, fancy type, made of selected quality glass fixed to wooden plugs with chromium plated brass screws and cup washers , complete all as specified.
45Vitreous china wash down water closet (pedestal pattern), suitable for P or S trap white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc, fixed in repair, complete all as specified and as directed.
46Vitreous china wash down one piece EWC with slim soft closer seat cover 'S' or 'P' Trap white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc, fixed in repair, complete all as specified and as directed.
47Plastic water closet seat, closet pattern with flat button and cover and including mild steel chromium plated or aluminum hinges device complete fixed in repairs , all as specified.
48S&F in repair for wall mounted sensor urinal white with concealed inlet and outlet of size 350 x 340 x 615 mm including battery and all fixtures fixed to wall with anchor bolts with complete installation all as per manufacturers instruction and as directed.
49PVC low level flushing cistern 10 ltrs capacity , valve less, syphonic action type, white, with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe etc., fixed in repairs,complete all as specified and directed.
50Vitreous china,white, wash hand basin, flat back of size 550x400mm, white including MS brackets and pedestal pattern including cutting for and pinning including 32mm dia CP brass waste coupling and PVC waste pipe ,fixed in repair complete all as specified.
51CP Towel Ring 200mm dia Fixed in repair complete all as specified and as directed by Engineer-in-Charge.
5220mm dia brass chromium plated tubular towel rails,D type,60 cm long between flanges Fixed in repair complete all as specified and as directed.
53Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long fixed in repair complete all as specified and as directed.
54Corner Glass self ( With CP brackets), as in repairs complete all as specified and as directed.
55Single lever wall mixer, telephonic type, brass, chromium plated, fancy type, with capstan head handles with lettered 'hot' and 'cold', screwed down high pressure, including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, fixed in repair, complete all as specified and directed.
56Centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, fixed in repair complete all as specified and directed.
57Hand shower (telephonic shower), chromium plated, with 900mm long 15mm bore chrome finish flexible pipe, fixed in repair complete all as specified and directed.
58Shower rose, brass, chromium plated, 150 mm x 100mm Square with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union as in repair complete all as specified and directed.
59Angle valve, brass, chromium plated, fancy type, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed.
60Bib taps long body, brass, chromium plated, fancy type, long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed.
61Health faucet, brass, chromium plated, with 900mm long 15mm bore chrome finish flexible pipe, fixed in repair complete all as specified and directed.
62PVC flexible connections 450mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.
63PVC flexible connections 600mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.
64Stop valves, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down high pressure, with capstan head handle, screwed both ends for iron pipe or for unions and fixed.
65CP brass grating 100mm dia, centre hole, fixed in repair complete all as specified and as directed.
66CP brass grating 100mm dia, fixed in repair complete all as specified and as directed.
67Toilet paper holder, brass, chromium plated, heavy duty, fixed with brass screw complete all as specified and as directed.
68Sink wall mixture, brass, chromium plated, fancy type, with capstan head handles screwed down high pressure, with lettered 'hot' and 'cold', including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, fixed in repair, complete all as specified and directed.
69Dismantling water tanks of 1000 ltrs and removing to store, complete all as specified and as directed.
70Dismantling water tanks of 500 ltrs and removing to store, complete all as specified and as directed.
71Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity (Tripple layer) any colour including water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed.(fixed in repair)
72Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity (Tripple layer) any colour including water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed.(fixed in repair)
73M&L for automatic water level contro float valve, high pressure nylon inside type side inner design fit to fix with 20mm dia pipe including taking down old float valve complete all as specified and directed.
74Taking up or down steel tubing and connection, including cleaning for re-fixing or removal to store of size of pipe 15 mm bore laid on floor or wall complete all as specified and directed.
75Taking up or down steel tubing and connection, including cleaning for refixing or removal to store of size of pipe 20 mm bore laid on floor or wall complete all as specified and directed.
7615 mm dia medium grade galvanised tubes with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.
77All as per Serial Item no 76.00 here in before but except tubing (Old serviceable tubing as retrieved vide item above shall be reused under this item).
78Steel water tubing, medium grade, 20mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.
79All as per Serial Item no 78.00 here-in-before but except tubing (Old serviceable tubing as retrieved vide item above shall be reused under this item).
80S&F in repair 16 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 including all necessary fittings like Bend, FTA, MTA, in wall/ trenches complete all as specified
81All as per item No 80.00 here in before but 20mm bore complete all as specified and directed.
82S&F CPVC pipes 25mm bore SDR 11 (Class-1) conforming to IS for overflow line for 500/1000 ltr storage tank including all fitting and fixtures fixed to wall and floor with necessary clamps and one step CPVC Solvent including testing of joints complete all as spd and directed
83Cutting chases, pining in, making good to facings where required and pointing in cement mortar 1:3, for concealed water tubing etc and maing good, not exc 10cm girth complete all as specified and directed.
84Manually removing any kind of old or new debris/Demolished building material including loading in truck and conveying day to day basis to beyond the lead included in the rates, including loading, unloading and stacking at the destination approved dumping point etc. complete. with all lifts and lead outside MoD Land upto 5 Km distance, complete all as specified and directed by Engr-in-Charge. S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56446527
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 40 Lakhs
LAST DATE 03-08-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair/Maint Of Sewage Line, Septic Tank And Connected Items For Marrried Acccn For Pb Enclave, Chinar Complex And Adjoining Area Age B/R-I Under Ge (N) Udh Ur
Basic Detail
Tender No GE/U(N)-67/2026-27
Bidding Type Tender
Location
City Udhampur
State Jammu and Kashmir
Key Dates
Publish Date 14 Jul 2026
Submission Date 03 Aug 2026
Open Date 06 Aug 2026
Finance
Tender Value 40 Lakhs
Tender Fee 500
EMD 80000
Exemption Available
Document List
BOQ_871754.xls
ea6d3c94-189b-442f-81bb-dfad23e0c857.html
Tender.pdf
Tendernotice_1 (6).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Aug 06, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_871754.xls

html

ea6d3c94-189b-442f-81bb-dfad23e0c857.html

pdf

Tender.pdf

pdf

Tendernotice_1 (6).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders