Tender For Repairs /Maint Of Wooden / Steel Furniture To Panting / Polishing Various Types Of Chair, Almirah, Steel Large Medium, Laboratory Table Sofa, Misc Furniture And Fd Stn Pithoragarh
Tender Value
7 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
20 days left
EMD
14000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pithoragarh → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs /Maint Of Wooden / Steel Furniture To Panting / Polishing Various Types Of Chair, Almirah, Steel Large Medium, Laboratory Table Sofa, Misc Furniture And Fd Stn Pithoragarh
BOQ
| Sl. No. | Item Description |
| 1 | Contract Details |
| 2 | Dining Chair 450x470x660mm :- (i) S & F of new components of Dining Chair with arms made of 1st class hardwood (Shisham) including dismantling of old unservicable one complete all as specified, directed and shown on drawings :- M & L for providing new dining chair cushion of 32 density cool foam of size of base seat shade & quality to cover the of Size 18\\"x18\\" of seat all as specified direceted (Make BWR ply foam Godrej, Supreme) |
| 3 | (ii) M & L for providing new tapestry cloth cover for seat foam and back foam of dining chair of approved shade & quality to cover the of Size 18\\"x18\\" of back portion and 18\\"x18\\" thick portion of seat cost of tapestry cloth shall not be less than Rs 250.00 per running meter. |
| 4 | (iii) M & L for providing new dining chair cushion of 32 density cool foam of size of back portion of chair 18\\"x18\\" 1 inch foam suport complete all as specified and directed. (Make of foam Godrej, Supreme) |
| 5 | (iv) M & L for preparation of surfaces of Dinning Chair by thoroughly rubbing with emery paper, applying raw / burnt seina unifoemly and polishing with french polish two or more coat to obtain a glossy finish complete all as specified and directed (Make of Asian/Berger/Nerolac). |
| 6 | (v) M & L for providing new ISI Marked Plywood 12mm Thick for seat Dinning Chair of approved shade & quality to cover the of Size 18\\"x18\\" of seat all as specified direceted (Make BWR ply Archidlam/Centary). |
| 7 | (vi) All as per item No 2 (i) above broken/unsv Back Rest of complete all as specified and directed. |
| 8 | (vii) All as per item No 2 (i) above broken/unsv rear leg of complete all as specified and directed |
| 9 | (viii) All as per item No 2 (i) above broken/unsv left side batten of complete all as specified and directed |
| 10 | (ix) All as per item No 2 (i) above broken/unsv right side batten of complete all as specified and directed |
| 11 | (x) All as per item No 2 (i) above broken/unsv front leg of complete all as specified and directed |
| 12 | Senior Executive Table Size 1800x700x750mm (TP) S & F of new components of Senior Executive Table Size 1800x700x750mm made of 1st class hardwood (Shisham) including dismanting of old unservicable one complete all as specified, directed and shown on drawing :-(i) Top size 1800mm for Senior Executive Table Size 1800x700x750mm made of 19mm thick white sunmica pre-laminated particle board particle board including dismantling and wooden kils for leg suport all as specified, directed (Make BWR ply Archidlam/Centary) |
| 13 | (ii) All as per item No 12 (i) above taking out old broken/unsv shutter of cuboard of Senior Executive Table Size 1800x700x750mm and S&F new shutter suitable shape & size made out of steel shutter 24mm thick exteriorgde two side as per steel shape and size fixed with new 60mm long cold roller ms hinged med gde 40mm round steel knob of complete all as specified and directed. |
| 14 | (iii) All as per item No 12 (i) above taking out old broken/unsv Wooden Drawer Lock and Make Harrison/Link/Godrej with duplicate key Godrej, Supreme) |
| 15 | (iv) All as per item No 12 (i) above taking out old broken/unsv Side Panel Left Size 1800x700x750mm for Senior Executive Table made of plywood 19mm thick with white sunmica with suport wooden kils all as specified, directed. |
| 16 | (v) All as per item No 12 (i) above taking out old broken/unsv Right Side Panel Size 1800x700x750mm for Senior Executive Table made of plywood 19mm thick with white sunmica with suport wooden kils all as specified, directed. |
| 17 | (vi) All as per item No 12 (i) above taking out old broken/unsv front Leg Made of tringle shape 1st class hardwood (Shisham) |
| 18 | (vii) M&L for taking out old broken/unsv rear/back of Senior Executive table and S&F new suitable legs same shape and size made out of 1 st class hard wood (shisham) coplete all as specified and dricted. |
| 19 | ((viii) All as per above broken/unsv Top four corner side patti 2\\" inch made 1st class hardwood (Shisham) including dismantling and wooden kils for leg suport all as specified, directed |
| 20 | (ix) All as per above taking out old broken/unsv centre Panel Size 1800x700x750mm for Senior Executive Table made of plywood 19mm thick with white sunmica with suport wooden kils all as specified, directed. |
| 21 | (x) All as per above taking out old broken/unsv Wooden Drawer Handle and Make Harrison/Link/Godrej with duplicate key |
| 22 | (xi) M & L for preparation of sufcase of Senior Executive table by throughly rubbing with emery paper, applying raw / burnt seina uniformly and polishing with french polish two or more cost to obtain a glossy finish complete all as specified and directed. |
| 23 | Chair Easy FD-229S & F of new components of chair Easy made of 1st class hardwood (Shisham) including dismantling of old unservicable one complete all as specified, directed and shown on drawings. (i) All as per items above but broken rear leg piece of complete all as specified and directed. |
| 24 | (ii) All as per item No 23 (i) above but broken fornt leg piece of complete all as specified and directed. |
| 25 | (iii) All as per item No 23 (i) above but broken Rear/Front/side rail of complete all as specified and directed. |
| 26 | (iv) All as per item No 23 (i) above but broken Stiffener of complete all as specified and directed. |
| 27 | (v) All as per item No 23 (i) above but broken Back rest of complete all as specified and directed. |
| 28 | (vi) M & L for recanning of Chair Esay in 'Godrej' pattern with 2 mm wide & 0.6 mm thick for centre portion and 4 mm wide plastic cane for borders including dismantling of old unservicable one complete all as specified, directed and shown on drawings :- |
| 29 | (vii) M & L for preparation of sufcase by throughly rubbing with emery paper, applying raw / burnt raw / burnt seina uniformly and polishing two or more coats with french polish to obtain a glossy finish with and including fixing of 4 Nos, nylon buffers at the bottom of the chairs complete all as specified, directed and shown on drawings. ( Make of Asian/Berger/Nerolac). |
| 30 | (viii) PVC Shoes |
| 31 | Chair C B Steel With/Out Arms (FD-75)S & F of the following components of Chair steel tubular with out arms made out of shisham wood french polished duly plastic canned in \\"Godrej\\" pattern with plastic cane 2 mm width and borders with 4 mm wide plastic cane fixed with screw 7.5 cm long (04 Nos, duly fitted one nut and one washer) to fixed the chair frame complete all as specified, directed and showm on drawings includings dismantling of old inservicable one:-(i) Replacement of legs frame of Chair Steel Tublar With out Arms S&F new legs frame made out of 20 Gauge MS pipe complete all as shown on drg, specified and directed. |
| 32 | (ii) All as per item No 31 (i) above Replacement of Seat frame of Chair Steel Tublar With/out Arms S&F new seat frame complete all as shown on drg, specified and directed. |
| 33 | (iii) All as per item No 31 (i) above Replacement of Back frame of Chair Steel Tublar With out Arms S&F new Back frame complete all as shown on drg, specified and directed. |
| 34 | (iv) All as per item No 31 (i) above Replacement of Handle made of shisham wood duly french polished and fixed to the chair with arms screw of suitable size. |
| 35 | (v) All as per item No 31 (i) above Replacement of 50 mm long flat iron piece made of 25 x 4 mm flat duly Gas welding at four corner of seat and back to supprt and screwed with the seat at two. |
| 36 | (vi) All as per item No 31 (i) above Welding work wherever required as directed by EIC |
| 37 | (vii) All as per item No 31 (i) above Replacement the old broken shoes of chairs and S & F best quality new PVC shoes to the legs of chair. |
| 38 | (viii) All as per item No 31 (i) above M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Chair steel tubular with out arms paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). |
| 39 | (ix) M&L for two coat including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Chair steel tubular with out arms, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac, Drak ovile Green). |
| 40 | Table Office Steel Clerk FD-84(M), FD-1004 S & F following components of table office clerk including dismantling taking out carefully & replace old components of table office clerk. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. (i) Dismantling, taking out carefully old existing broken U/S Locks of any description & replacement of the same with S&F new Locks with double key fix with suitable 4mm dia screws complete machine all as shown on drg specified and directed. (Make :- Godraj/Harrison/ Nova) |
| 41 | (ii) Replacement of old existing broken table office top of any description with S&F new table top of 18 mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century/Action Tesa/ Green Panel). |
| 42 | (iii) All as per item No 40 (i) above per item 4.01 here in but top of table clerk. |
| 43 | (iv) All as per item No 40 (i) above Replacement of drawer with S&F new table drawer made to shape, fixed in position all as shown on drg, specified and directed with Locking arrangement i.e. Key holes etc. |
| 44 | (v) All as per item No 40 (i) above Leg (New leg must be made of 25mm MS square pipe,16 gauge all as specified and shown on drg) |
| 45 | (vi) All as per item No 40 (i) above Stiffener (New stiffener must be made of 25mm MS square pipe,16 gauge all as specified and shown on drg) |
| 46 | (vii) All as per item No 40 (i) above Replacement of standard PVC Handle with S&F new PVC handle. |
| 47 | (viii) All as per item No 40 (i) above Welding work wherever required as directed by EIC |
| 48 | (ix) All as per item No 40 (i) above Replacement of rubber shoe with S&F new hard rubber shoe of superior quality. |
| 49 | (x) M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the table officers, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). |
| 50 | (xi) M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the table clerk, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac, Drak ovile Green). |
| 51 | Revolving Cushioned Chair (TP) Size 430x320x250mm :-(i) M & L for providing new cushion of 32 density cool foam of Revolving Cushioned Chair of back portion double side of Revolving chair 30\\"x30\\" and including dismantling of old unservicable one complete all as specified, directed and show on drawing (Make of foam Godrej, Supreme) :- |
| 52 | (ii) M & L for providing new tapestry cloth cover for seat foam and back foam of revolving chair of approved shade & quality to cover the of Size 30\\"x30\\" of back portion and 30\\"x30\\" thick portion of seat cost of tapestry cloth shall not be less than Rs 250.00 per running meter. |
| 53 | (iii) All as per items unsv/broken for providing new cushion of 32 density cool foam of Officer Revolving chair Size 500x500x100mm of base of seat portion duble side of Revolving chair 18\\"x18\\" and including dismantling of old unservicable one complete all as specified, directed (Make of foam Godrej, Supreme) :- |
| 54 | (iv) All as per item No 51 (i) above broken/unsv revolving Chair Wheel 50 mm dia complete all as specfied and directed. |
| 55 | (v) All as per item No 51 (i) above broken/unsv new PP leg base steel as per trade pattern complete all as specified and directed |
| 56 | (vi) All as per item No 51 (i) above broken/unsv arms handle complete all as specified and directed. |
| 57 | (vii) All as per item No 51 (i) above but broken/unsv lifting Hordlic complete all as specfied and directed. |
| 58 | (viii) All as per item No 51 (i) above broken/unsv plywood 12mm thick and base frame with plastic Strip 1\\" and with 2\\" screw complete all as specifed and directed. |
| 59 | Revolving Chair Tilting with Arms (TP) Size 520x550x100mm :-(i) M & L for providing new cushion of 32 density cool foam of Revolving Chair Tilting with Arms of back portion double side of Revolving chair 30\\"x30\\" and including dismantling of old unservicable one complete all as specified, directed and show on drawing (Make of foam Godrej, Supreme) :- |
| 60 | (ii) M & L for providing new tapestry cloth cover for seat foam and back foam of revolving chair of approved shade & quality to cover the of Size 30\\"x30\\" of back portion and 30\\"x30\\" thick portion of seat cost of tapestry cloth shall not be less than Rs 250.00 per running meter. |
| 61 | (iii) All as per items unsv/broken for providing new cushion of 32 density cool foam of Officer Revolving chair Size 500x500x100mm of base of seat portion duble side of Revolving chair 18\\"x18\\" and including dismantling of old unservicable one complete all as specified, directed (Make of foam Godrej, Supreme) :- |
| 62 | (iv) All as per item No 59 (i) above broken/unsv revolving Chair Wheel 50 mm dia complete all as specfied and directed. |
| 63 | (v) All as per item No 59 (i) above broken/unsv new PP leg base steel as per trade pattern complete all as specified and directed |
| 64 | (vi) All as per item No 59 (i) above broken/unsv arms handle complete all as specified and directed. |
| 65 | (vii) All as per item No 59 (i) above but broken/unsv lifting Hordlic complete all as specfied and directed. |
| 66 | (viii) All as per item No 59 (i) above broken/unsv plywood 12mm thick and base frame with plastic Strip 1\\" and with 2\\" screw complete all as specifed and directed. |
| 67 | Officer Revolving Chair with Arms (TP) Size 500x500x120mm :-(i) M & L for providing new cushion of 32 density cool foam of Officer Revolving Chair with Arms of back portion double side of Revolving chair 30\\"x30\\" and including dismantling of old unservicable one complete all as specified, directed and show on drawing (Make of foam Godrej, Supreme) :- |
| 68 | (ii) M & L for providing new tapestry cloth cover for seat foam and back foam of revolving chair of approved shade & quality to cover the of Size 30\\"x30\\" of back portion and 30\\"x30\\" thick portion of seat cost of tapestry cloth shall not be less than Rs 250.00 per running meter. |
| 69 | (iii) All as per items unsv/broken for providing new cushion of 32 density cool foam of Officer Revolving chair Size 500x500x100mm of base of seat portion duble side of Revolving chair 18\\"x18\\" and including dismantling of old unservicable one complete all as specified, directed (Make of foam Godrej, Supreme) :- |
| 70 | (iv) All as per item No 67 (i) above broken/unsv revolving Chair Wheel 50 mm dia complete all as specfied and directed. |
| 71 | (v) All as per item No 67 (i) above broken/unsv new PP leg base steel as per trade pattern complete all as specified and directed |
| 72 | (vi) All as per item No 67 (i) above broken/unsv arms handle complete all as specified and directed. |
| 73 | (vii) All as per item No 67 (i) above but broken/unsv lifting Hordlic complete all as specfied and directed. |
| 74 | (viii) All as per item No 67 (i) above broken/unsv plywood 12mm thick and base frame with plastic Strip 1\\" and with 2\\" screw complete all as specifed and directed. |
| 75 | Sofa Singal Seater (TP)S &F of new components of Sofa Set Singal Seater made of 1st Class Hardwood (Shisham) including dismantling of old unservicable one complete all as specified, directed and show on drawing :- (i) M & L for providing new cushion of 40 density cool foam of size of and base of seat of size 5\\"x21\\"x21\\" 1\\" inch thick suport complete all as specified and directed. (Make of foam Godrej, Supreme) |
| 76 | (ii) M & L for providing new cushion of 40 density cool foam of size of back portion of sofa 5\\"x18\\"x21\\" 2 inch foam suport and seat thick complete all as specified and directed. (Make of foam Godrej, Supreme) |
| 77 | (iii) M & L for providing new tapestry cloth cover for seat foam and back foam sets of approved shade & quality to cover the foam of size 5\\"x18\\"x21\\" of back portion and 5\\"x21\\"x21\\" thick of seat cost of tapestry cloth shall not be less than Rs 350.00 per running meter tapestry cloth five meter per sofa. |
| 78 | (iv) M & L for preparation of surfaces of sofa single seater by thoroughly rubbing with emery paper, applying raw / burnt seina unifoemly and polishing with french polish two or more coat to obtain a glossy finish complete all as specified and directed. ( Make of Asian/Berger/Nerolac) |
| 79 | (v) All as per item No 75 (i) but broken/unsv rear leg of complete all as specified and directed. |
| 80 | (vi) All as per item No 75 (i) but broken/unsv rails single seater sofa complete all as specified and directed. |
| 81 | (vii) All as per item No 75 (i) but broken/unsv batten of seat & back single seater sofa complete all as specified and directed. |
| 82 | (viii) All as per item No 75 (i) unsv spring/doori/Hessian cloth of seat base portion single seater sofa complete all as specified and directed. |
| 83 | (ix) All as per items broken/unsv front leg of complete as specified and directed. |
| 84 | Sofa double Seater (TP)S & F of new components of Sofa double Seater made of 1st class hardwood (Shisham) including dismanting of old unservicable one complete all as specified, directed and shown on drawing :-(i) M & L for providing new cushion of 40 density cool foam of size of back portion of sofa 4\\"x41\\"x18\\" 2 inch foam suport thick complete all as specified and directed. (Make of foam Godrej, Supreme) |
| 85 | (ii) M & L for providing new cushion of 40 density cool foam of size of base seat portion of sofa size 5\\"x41\\"x21\\" 1 inch foam suport and seat of thick complete all as specified and directed. (Make of foam Godrej, Supreme) |
| 86 | (iii) M & L for providing new tapestry cloth for seat foam and back foam of sofa base sets of approved shade & quality to cover the foam of size 4\\"x41\\"x18\\" of back portion and 5\\"x41\\"x21\\" thick portion of seat cost of tapestry cloth shall not be less than Rs 350.00 per running meter and tapestry cloth seven running meter per sofa. |
| 87 | (iv) M & L for preparation of sufcase of sofa set double seater by throughly rubbing with emery paper, applying raw / burnt seina uniformly and polishing with french polish two or more cost to obtain a glossy finish complete all as specified and directed. ( Make of Asian/Berger/Nerolac) |
| 88 | (v) All as per item No 84 (i) above but broken/unsv middle batten of seat & back double seater sofa complete all as specified and directed. |
| 89 | (vi) All as per item No 84 (i) above broken/unsv long rail piece of double seater sofa complete all as specified and directed. |
| 90 | (vii) All as per item No 84 (i) above broken/unsv rear leg with left arms piece of complete all as specified and directed. |
| 91 | (viii) All as per item No 84 (i) above broken/unsv rails piece of double seat complete all as specified and directed. |
| 92 | (ix) All as per item No 84 (i) above but broken/unsv rear leg with right arms piece of complete all as specified and directed. |
| 93 | (x) All as per item No 84 (i) above but broken/unsv left side panel inner/outer frame with right arms piece of complete all as specified and directed. |
| 94 | (xi) All as per item No 84 (i) above but broken/unsv right side panel inner/outer frame with right arms piece of complete all as specified and directed. |
| 95 | Sofa Set Three Seater (TP)S & F of new components of sofa three seater made of 1st class hardwood (shisham) including dismanting of old unservicable one complete all as specified, directed and shown on drawings(i) M & L for providing new cushion of 40 density cool foam of size of back portion of sofa 4\\"x41\\"x18\\" 2 inch foam suport 2 inch foam suport thick complete all as specified and directed. (Make of foam Godrej, Supreme) |
| 96 | (ii) M & L for providing new tapestry cloth cover for seat foam and back foam of sofa sets of approved shade & quality to cover the foam of size 5\\"x63\\"x19\\" of back portion and 5/1/2\\"x63\\"x21\\" thick portion of seat cost of tapestry cloth shall not be less than Rs 350.00 per running meter and tapestry cloth nine running meter per sofa . |
| 97 | (iii) M & L for providing new cushion of 40 density cool foam of size of base seat portion of sofa seat 5\\"x41\\"x21\\" 1 inch foam suport thick complete all as specified and directed. (Make of foam Godrej, Supreme) |
| 98 | (iv) M & L for preparation of surfaces of sofa set three seater by thoroughly rubbing with emery paper, applying raw / burnt seina unifoemly and polishing with french polish two or more coat to obtain a glossy finish complete all as specified and directed. (Make of Asian/Berger/Nerolac) |
| 99 | (v) All as per items above but broken/unsv front long rails piece of three seat complete all as specified and directed. |
| 100 | (vi) All as per item No 95 (i) above broken/unsv middle batten piece of three seat complete all as specified and directed. |
| 101 | (vii) All as per item No 95 (i) above broken/unsv rear leg with piece of complete all as specified and directed. |
| 102 | (viii) All as per item No 95 (i) above broken/unsv front leg piece of complete all as specified and directed. |
| 103 | (ix) All as per item No 95 (i) above but broken back rest piece of complete all as specified and directed. |
| 104 | (x) All as per item No 95 (i) above broken/unsv right arms piece of complete all as specified and directed. |
| 105 | (xi) All as per item No 95 (i) above broken/unsv left arms piece of complete all as specified and directed. |
| 106 | Officer Revolving Chair with Arms (TP) Size 500x500x100mm(i) M & L for providing new cushion of 32 density cool foam of Officer Revolving Chair with Arms (TP) Size 500x500x100mm of back portion duble side of Revolving chair 30\\"x30\\" and including dismantling of old unservicable one complete all as specified, directed and show on drawing :- |
| 107 | (ii) M & L for providing new tapestry cloth cover for seat foam and back foam of revolving chair of approved shade & quality to cover the of Size 30\\"x30\\" of back portion and 30\\"x30\\" thick portion of seat cost of tapestry cloth shall not be less than Rs 250.00 per running meter. |
| 108 | (iii) All as per items unsv/broken for providing new cushion of 32 density cool foam of Officer Revolving chair Size 500x500x100mm of base of seat portion duble side of Revolving chair 18\\"x18\\" and including dismantling of old unservicable one complete all as specified, directed |
| 109 | (iv) All as per item No 106 (i) above broken/unsv revolving Chair Wheel 50 mm dia complete all as specfied and directed. |
| 110 | (v) All as per item No 106 (i) above broken/unsv new PP leg base steel as per trade pattern complete all as specified and directed |
| 111 | (vi) All as per item No 106 (i) above broken/unsv arms handle complete all as specified and directed. |
| 112 | (vii) All as per item No 106 (i) above but broken/unsv lifting Hordlic complete all as specfied and directed. |
| 113 | (viii) All as per item No 106 (i) above broken/unsv plywood 12mm thick and base frame with plastic Strip 1\\" and with 2\\" screw complete all as specifed and directed. |
| 114 | ix) All as per item No 106 (i) unsv/broken with pushing handle nut/bolt with washer complete all as specifed and directed. |
| 115 | Table Officer Steel 1675x865x762mm S & F following components of Table Officer Steel 1675x865x762mm including dismantling taking out carefully & replace old components of table office clerk. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. (i) Dismantling, taking out carefully old existing broken U/S Locks of any description & replacement of the same with S&F new Locks with double key fix with suitable 4mm dia screws complete machine all as shown on drg specified and directed. (Make :- Godraj/Harrison/ Nova) |
| 116 | (ii) Replacement of old existing broken table officer top of any description with S&F new table top of 18 mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century/Action Tesa/ Green Panel). |
| 117 | (iii) All as per item No 115 (i) above per item 4.01 here in but top of table officer. |
| 118 | (iv) All as per item No 115 (i) above Replacement of drawer with S&F new table drawer made to shape, fixed in position all as shown on drg, specified and directed with Locking arrangement i.e. Key holes etc. |
| 119 | (v) All as per item No 115 (i) above Leg (New leg must be made of 25mm MS square pipe,16 gauge all as specified and shown on drg) |
| 120 | (vi) All as per item No 115 (i) above Stiffener (New stiffener must be made of 25mm MS square pipe,16 gauge all as specified and shown on drg) |
| 121 | (vii) All as per item No 115 (i) above Replacement of standard PVC Handle with S&F new PVC handle. |
| 122 | (viii) All as per item No 115 (i) above Welding work wherever required as directed by EIC |
| 123 | (ix) All as per item No 115 (i) above Replacement of rubber shoe with S&F new hard rubber shoe of superior quality. |
| 124 | (x) M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the table officers, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). |
| 125 | (xi) M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the table clerk, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac, Drak ovile Green). |
| 126 | Chair Dining Long Back FD 357:- S & F of new components of Chair Dining Long Back made of 1st class hardwood (Shisham) including dismantling of old unservicable one complete all as specified, directed and shown on drawings :-(i) M & L for preparation of surfaces of Chair Dining Long Back by thoroughly rubbing with emery paper, applying raw / burnt seina unifoemly and polishing with french polish two or more coat to obtain a glossy finish complete all as specified and directed . Make of Asian/Berger/Nerolac |
| 127 | (ii) M & L for providing new tapestry cloth cover for seat foam and back foam of Chair Dining Long Back of approved shade & quality to cover the of Size 18\\"x18\\" of back portion and 18\\"x18\\" thick portion of seat cost of tapestry cloth shall not be less than Rs 250.00 per running meter. |
| 128 | (iii) M & L for providing new dining chair cushion of 32 density cool foam of size of back portion of chair 18\\"x18\\" 1 inch foam suport complete all as specified and directed. (Make of foam Godrej, Supreme) |
| 129 | (iv) M & L for providing new dining chair cushion of 32 density cool foam of size of base seat portion of chair 18\\"x18\\" 1 inch foam suport complete all as specified and directed. (Make of foam Godrej, Supreme) |
| 130 | (v) M & L for providing new ISI Marked Plywood 12mm Thick for seat Chair Dining Long Back of approved shade & quality to cover the of Size 18\\"x18\\" of seat all as specified direceted. (Make BWR ply Archidlam/Centary) |
| 131 | (vi) All as per item No 126 (i) above broken/unsv Back Rest of complete all as specified and directed. |
| 132 | (vii) All as per item No 126 (i) above broken/unsv rear leg of complete all as specified and directed |
| 133 | (viii)All as per item No 126 (i) above broken/unsv left side batten of complete all as specified and directed |
| 134 | (ix) All as per item No 126 (i) above broken/unsv right side batten of complete all as specified and directed |
| 135 | (x) All as per item No 126 (i) above broken/unsv front leg of complete all as specified and directed |
| 136 | Senior Executive Table Size 1500x900x750mm (TP) S & F of new components of Senior Executive Table Size 1500x900x750 made of 1st class hardwood (Shisham) including dismanting of old unservicable one complete all as specified, directed and shown on drawing :-(i) Top size 1500mm for Senior Senior Executive Table Size 1500x900x750 made of 19mm thick white sunmica pre-laminated particle board particle board including dismantling and wooden kils for leg suport all as specified, directed |
| 137 | (ii) All as per above taking out old broken/unsv Wooden Drawer Lock and Make Harrison/Link/Godrej with duplicate key |
| 138 | (iii) All as per above taking out old broken/unsv Side Panel Left Size 1500x900x750mm for Senior Executive Table made of plywood 19mm thick with white sunmica with suport wooden kils all as specified, directed. |
| 139 | (iv) All as per above taking out old broken/unsv Right Side Panel Size 1500x900x750mm for Senior Executive Table made of plywood 19mm thick with white sunmica with suport wooden kils all as specified, directed. |
| 140 | (v) M & L for preparation of sufcase of Senior Executive table by throughly rubbing with emery paper, applying raw / burnt seina uniformly and polishing with french polish two or more cost to obtain a glossy finish complete all as specified and directed. |
| 141 | (vi) All as per item No 136 (i) above taking out old broken/unsv front Leg Made of tringle shape 1st class hardwood (Shisham) |
| 142 | (vii) All as per item No 136 (i) M&L for taking out old broken/unsv rear/back leg of Senior Executive table and S&F new suitable legs same shape and size made out of 1 st class hard wood (shisham) coplete all as specified and dricted. |
| 143 | (viii)All as per item No 136 (i) above broken/unsv Top four corner side patti 2\\" inch made 1st class hardwood (Shisham) including dismantling and wooden kils for leg suport all as specified, directed |
| 144 | (ix) All as per item No 136 (i) above taking out old broken/unsv centre Panel Size 1500x900x750mm for Senior Executive Table made of plywood 19mm thick with white sunmica with suport wooden kils all as specified, directed. |
| 145 | (x) All as per item No 136 (i) above taking out old broken/unsv shutter of cuboard of Senior Executive Table Size 1500x900x750mm and S&F new shutter suitable shape & size made out of steel shutter 24mm thick exteriorgde two side as per steel shape and size fixed with new 60mm long cold roller ms hinged med gde 40mm round steel knob of complete all as specified and directed. |
| 146 | (xi) All as per item No 136 (i) above taking out old broken/unsv Wooden Drawer Handle and Make Harrison/Link/Godrej with duplicate keyNOTES:-(i) Painting/Polishing work shall be carried out all around on the complete exposed suraface including internal parts like shelves, drawers, stiffners, partions etc, with spray painting process.(ii) Newly reaplced parts shall be traeted with one coat of primer before Painting/Polishing work and cost of the same deemed included in the rate of these items.(iii) Cost of removing of all dent and correcting of deshaped profiles shall deemed to be included in the unit rate of these items.(iv) Surface and site shall be made neat and clean by the contractor.(v) Contractor has to visit at site before quopting tender, Tenders may be noted that amount of creadit will be deducted from the amount arived, at the time of Acceptance of contract.(vi) Work Shall be carried out within the areas of FD Stn Pithoragarh under AGE (I) R&D Haldwani, HQ DIBER or in the furniture yard of BSO as Specified and directed.(vii) Repair will be carried out in furniture yard an different location fall FD Stn Pithoragarh.(viii) Duration of the contract : - 06 months. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender