Tender For Provn Of Hard Standing For Coy Area (800 Sqft) And Covered Cycle Stand With Hard Ground (2000 Sqft) 90 Ocs At P-29 Block At Ota Gaya
Tender Value
18.87 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
19 days left
EMD
37740
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gaya → Bihar
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Hard Standing For Coy Area (800 Sqft) And Covered Cycle Stand With Hard Ground (2000 Sqft) 90 Ocs At P-29 Block At Ota Gaya
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in hard/dense soil complete all as specified and directed |
| 2 | M & L for cement concrete type C-2, 1:3:6 using 40mm graded stone aggregae as in foundations, filling and mass concrete complete all as specified and directed |
| 3 | M & L brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed |
| 4 | M&L for 15mm thick rendering in cement mortar 1:4 on fair face of brickwork or concrete surface and finished even & smooth (without using extra cement) complete all as specified and directed |
| 5 | M & L RCC (nominal mix) type B1 1:2:4 using 20 mm graded aggregate in Foundations, incl rafts, footings, foundation beams; plinth beams; bases for columns and mass concrete complete all as specified and directed |
| 6 | S & F rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed . |
| 7 | S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 8 | Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed |
| 9 | S & F rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming to Fe-290(Gde E 165) for cycle stand complete all as specified and directed by engr-in-charge . |
| 10 | M & L for preparation of new or previously untreated steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed . |
| 11 | M & L for hardcore of broken bricks of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed |
| 12 | M & L 75mm thick PCC type D-2, (1:4:8) in sub base floor complete all as specified and directed |
| 13 | M&L for 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified and directed |
| 14 | M & L for 12 mm thick dark shed endura parking tile (square/rectangular) area of each tile exc 0.09 Sqm but not exc. 0.16 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over complete all as specified and directed by |
| 15 | M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed |
| 16 | M&L Mild steel TMT bars 5mm dia & over,upto and including 10mm dia as in stirrups ,spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed |
| 17 | Sand filling under floors for cushioning of including watering and consolidation complete all as specified and directed |
| 18 | M & L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and no pigment complete all as specified and directed |
| 19 | Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed |
| 20 | Returning, filling in, incl spreading, levelling, watering & well ramming in layers n. exc 25 cm in soil complete all as specified and directed Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender