Tender For special Repair To Offrs Family 2 Ward To Encl Vip Rooms At Main Hosp At Ahrr Under Ge E/M R&R Hosp. Delhi Cantt-10
Tender Value
48.19 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
23 days left
EMD
96380
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Offrs Family 2 Ward To Encl Vip Rooms At Main Hosp At Ahrr Under Ge E/M R&R Hosp. Delhi Cantt-10
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-Jul-2026 | Corrigendum | Date | 07-Sep-2026 |
| 2 | 25-Jul-2026 | Corrigendum | BOQ | 07-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 2 | Dismantle Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar |
| 3 | M & L for 16 to 18 mm thick granite of any type (table rubbed & polished) in jambs, pillars, window cills, plate forms,floors,steps, crumple joints in CM (1:4) including pointing in white cement (1:2), using marble dust with admixture of pigment to match with shade of granite incl 15mm thick screed bad or backing layer in CM 1:4 (incl moulding of edges) complete all as directed.. |
| 4 | M&L 15mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes all as specified. |
| 5 | M & L for non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed. |
| 6 | M&L for 10 mm thick rendering as backing coat for fixing wall tiles in CM 1 : 4 complete all as specified. |
| 7 | M&L for glazed ceramic colour tiles in vertical surface of size 600 X 300 x 7-8 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed. |
| 8 | M&L 3.2mm thick lead glass radiation resistence for x ray radiation fixing with all fitings and fixture complete all aspecified |
| 9 | M&L for Vitrified Ceramic light/dark shade 7-9 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors(surface, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed. |
| 10 | -ditto- as per Srl item No 10 above but in vertical surfaces over and including 10 mm thick cement palster in cm 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed. |
| 11 | Taking down chowkhat or frames with shutter (without taking off shutter from frame) area n. exc 1.50 Sqm each. |
| 12 | Taking down chowkhat or frames with shutter (without taking off shutter from frame) area exc 1.50 Sqm but n .exc 4.00 sqm each. |
| 13 | S&F factory made single extruded WPC (Wood polymer composite) soild door frame of size 65mmx100mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonate and natural fibers (wood powder/rice husk/weat husk) and non toxic additives (max toxicity index of 12 for 100gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS scerws having min frame density of 750 Kg/cum, screw withdrawl strenght of 2200 N (Face) 1100N (Edge) min compressive strenght of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of frame of class A category with property of being termite/borer proof, water/moisture proof and fire retrandant complete all as specified and directed. |
| 14 | S&F factory made single extruded WPC (Wood polymer composite) soild plain flush door shutter of 35mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonate and natural fibers (wood powder/rice husk/weat husk) and non toxic additives (max toxicity index of 12 for 100gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS scerws having min frame density of 750 Kg/cum, screw withdrawl strenght of 2200 N (Face) 1100N (Edge) min compressive strenght of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of frame of class A category with property of being termite/borer proof, water/moisture proof and fire retrandant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed countersunk SS screw complete all as specified and directed. |
| 15 | S&F 3mm thick aluminium composite panel (ACP Sheet) including necessary clips, rubber packing & aluminium beading (aluminium frame ) and fixing to existing or new framework all as specified. |
| 16 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing., complete all as specified and directed. |
| 17 | S&F factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed. |
| 18 | Providing and fixing factory made UPVC including necessary arrangement of deco grill with 4 mm clear/tinted/obscured glass for glazed portion,white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.5mm). Window profile with hollow section with multi chamber. Frame (70mm x 47mm), sliding sash (42mm x 60mm). Sliding mesh Sash (42mm x 50mm) all as per availability Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. |
| 19 | Providing and fixing factory made UPVC door/window frame of overall size as per site requirement, made from extruded UPVC profiles for outer frame size 60 mm × 50 mm ± 5 mm, wall thickness not less than 2.0 mm (± 0.5 mm), multi-chambered section reinforced with galvanized mild steel tube of minimum 1.0 mm thickness inside the profile for strength and rigidity, mitred and fusion welded at corners. |
| 20 | Providing and fixing factory made upvc white colour Door/window openable shutter profile to be of size 60 mm × 50 mm ± 5 mm, wall thickness not less than 2.0 mm (± 0.2 mm), reinforced with galvanized mild steel tube of minimum 1.0 mm thickness. Shutter to be fitted with UPVC panels of 20 mm ± 1 mm thickness (solid type)with 5 mm clear/tinted/obscured glass for glazed portion, fixed with UPVC beadings.Frame and shutter assembly to include stainless steel hinges (minimum 3 nos. per shutter), UPVC-compatible handle set, multipoint locking system or approved mortice lock, and EPDM/TPE weather gaskets for all contact edges. |
| 21 | S&F 5mm thick sheet glass best quality and glazing with necessary beading/casement and rubber beading used for partition with necessary silicon sealent if required all as specified and directed. |
| 22 | Supply only 4mm thick sheet glass, ordinary quality for fixing in windows, aluminium partitions and like, complete all as specified and directed. |
| 23 | S&F in repair toughened glass frameless door with fixed portion, of 12 mm thickness, including cutting holes, edges rounded and etching works etc and all kind of SS patch fitting & fixture, spider patch etc, complete all as directed. |
| 24 | M&L sensor for operating toughened glass sliding door with complete fittings and sliding accessories complete all as specified and directed. |
| 25 | S&F of stainless steel handle 450 mm long fixed to 12 mm thick toughned glass door with and including all fixing accessories i. e. bolt washer, adhesive etc, complete all as directed. |
| 26 | S&F of SS door lock, glass to glass type, suitable for 12 mm thick frameless toughned glass door with and incl all fixing accessories i. e. bolt, washer, screw, adhesive etc of suitable size, complete all as directed. |
| 27 | S& F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed |
| 28 | M&L for complete removal of old treatment on surfaces of walls through electrically operated grinder using sand paper for preparation of old decorated plastered surfaces of wall and applying two coat of anti bacterial paint over one or more coat wall care putty (average thickness of 1.5 mm) complete all as specified and directed. |
| 29 | Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 30 | M&L rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surface to fair and even without using extra cement complete all as specified and as directed |
| 31 | M&L for preparation of newly plastered surfaces and applying one or more coat wall care putty (average thickness of 1mm) to achieve smooth surface by sanding through electrically operated grinder using sand paper followed by two coats of anti bacterial paint over a coat of putty on wall surfaces complete all as specified. |
| 32 | Taking up or down tubing GI 15 mm dia incl all fittings complete all as specified |
| 33 | S & F 15mm bore medium grade concealed galvanised steel water tubing with all fittings fixed to wall or laid in floors, with and including for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. |
| 34 | S&F of in repair vitreous china wash basin, white colour, flat back type, of approx size 580 x 450 mm (for hospital use) including waste coupling, wall bracket, waste pipe of suitable size etc, complete all as directed. |
| 35 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as directed.. |
| 36 | S&F in repair 10 liters PVC valve less syphonic action type flushing cistern, low level white with inlet, ball valve, float and handle including bracket and flush pipe to squatt pattern closet including all joints and making good to the floor. |
| 37 | S&F in replacement of 15mm dia PVC connection 45 cm (PVC), complete all as directed. |
| 38 | M&L in repair 15mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 39 | S&F in repair of 15mm Bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed chromium plated, complete all as directed. |
| 40 | S&F in replacement of wash basin mixer, with out popup waste system, long body, made of cast copper alloy, chromium plated fancy type, suitable for 15 mm bore pipe, complete all as specified. |
| 41 | S&F Toilet paper holder, vitreous China, box type fixed to walls with chromium plated (CP) brass screws |
| 42 | S&F in replacement of bottle trap 32 mm size with 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified. |
| 43 | S&F in replacement of two way bib cock suitable for 15 mm bore water pipe, with & including wall flange, made of cast copper alloy, chromium plated fancy type, complete all as specified. |
| 44 | S&F in replacement of handshower (health faucet) with 8 mm dia, 1.0 M long flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified. |
| 45 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed. |
| 46 | S&F in replacement of PVC made multipurpose cabinet with front door looking mirror of overall minimum size 350 x 450 mm, complete all as directed. |
| 47 | S&F in repairs for Cast iron floor trap of 75 mm outlet plain with grating including jointing to waste pipe in run lead fixed in cement mortar complete all as specified. |
| 48 | S&F anodised aluminium frame with powder coating of any colour for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 49 | S&F anodised aluminium door shutters with powder coating of any colour, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 50 | M&L for rendering 15 mm thick in cement mortar 1:4 on brick or concrete surfaces using integral water proofing compound as per manufacture's instructions as in sunken floor complete all as specified and directed. Note: water proofing compound shall be measured for paid separately as supply only) |
| 51 | M&L for sealing of pipe penetration of toilets core cutting & sunken slab treatment in following stages:- (i) Supply and apply solvent free, moisture insensitive epoxy resin based patch repair putty Sikagrade-694F (I) ,yield : 0.6ltr/kg suitable for submerged condition having compressive strength of 40N/mm²(1day) according to IS 9162-1979 on pipe penetration surface. The putty shall be applied to a groove thickness of minimum 20mm on pipe penetration joints to concrete penetration of surface of sunken portion. (ii) M&L for waterproof Sealing arround perimeters & wall to floor junction with Sika® Seal Tape-S special tape ,made of thermoplastic elastomer reinforced with polyester woven fabric for waterproof sealing around perimeters and joints in wet tiled areas specially designed for wet room. (iii) M & L for glass fibre reinforced acrylic modified cementtitious coating system as Top coat : Sika Top Seal -107@ 1.5kg/m² over reinforcement : Sika Fab-1 over base coat :Sika Top seal-107 @ 1.5kg/m² etc all as specified and directed. System should have compressive strenght:20N/mm²: bond strength :2.0N/mm² complete all as specified and directed. Note : (i) Entire work shall be carried out through Manufacturar or his authorised representative.(ii) The contractor shall furnish a warranty for effectiveness of waterproofing treatment as per spl condition 34.period. The contractor may also furnish fixed deposit receipt/BGB in lieu of the sum to be retained as security. |
| 52 | M&L for PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) in sunken floor complete all as specified and directed. |
| 53 | M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in sunken floor complete all as specified |
| 54 | M&L for 40 mm thick PCC 1:2:4 type B0 (Using 12.5mm graded stone aggregate) as in flooring complete all as specified and directed. |
| 55 | Dismantling boarding, any description, fixed in any position with nails |
| 56 | S&F PVC 18/19mm thick PVC/wpc moulded solid board ,one side prelaminated for cabinets boxes shutters,etc with shelf and shutters full size fitted under/above kitchen cooking platform and other platform complete all as direction of the Engr-in charge and the manufacturer complete all as specified and directed by Engr-in-Charge |
| 57 | Supply only 19 mm thick commercial block board having density more than 650 kg/cum Required size complete all as specified and directed. |
| 58 | S&F soft closing clip on hinge, full / half overlay type, of stainless steel, all as specified. |
| 59 | S&F multipurpose lock 50mm size with triple keys, suitable for cup board door/drawer , complete all as specified. |
| 60 | S&F of cup board / drawer knob of stainless steel with matt finish fixed with screw, complete all as directed. |
| 61 | S&F telescopic type ball bearing slide & runner, suitable for drawers, complete all as directed. |
| 62 | Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as directed. |
| 63 | M & L for Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 |
| 64 | S&F zebra roller blinds type made out of fabric cloth of approved shade fixed as per the instructions of manufacturers, complete all as specified . |
| 65 | S&F Door closer hydraulically regulated aluminium (extruded section body) designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed |
| 66 | M&L for WPC fluted wall panelling 8-12 mm thick (as approved), Wood Plastic Composite boards , termite-proof, water-proof, UV-resistant, fire-retardant grade, with tongue-and-groove interlocking profile, in approved shade/texture/finish, fixed complete over metal framing at 300–450 mm c/c including supply & fixing of all required accessories such as starter profiles, internal/external corner profiles, J-trims, end caps, U-channels, jointers, PVC/aluminium beadings, stainless steel screws, concealed clips, adhesives (where required), cutting and shaping for openings, making the surface even, scaffolding, finishing, and complete installation including cleaning of site, complete all as specified and directed. |
| 67 | M&L for 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions |
| 68 | M&L for Second class hard-wood in scantlings in framed work , complete all as specified and directed. |
| 69 | M&L for 16 - 18mm thick italian marble (approved colour & Pattern & Size) machine cut fix to wall with 10 mm thick backing layer of premium quality adhesive paste (Hardner + Resin) for italian marble (MYK Laticrete / Roff / Tenax etc) with help of 10mm depth groove trowl over incl 15 mm thick layer of cement mortar 1:4 and joint filling with epoxy including with admixture of pigment to match with shade of italian marble stone including cutting, polishing and cleaning work complete complete all as specified and directed. Note:- (i) 50 mm thick foam sheet to be used for cutting of marble (ii) Vibrator and 10 mm depth groove trowl and other required tools to be used (iii) work to be execute through highly skilled labour (iv) Marble Adhesive will be approved by Engr-in-Charge before use |
| 70 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 71 | Supply and fixing aluminium composite panels cladding of approved make & shade having total thickness of 4 mm FR (Top coil - 0.5 mm, non Toxic PE - Core - 3 mm and back Coil - 0.50 mm) with 25 micron PVdF Coating on top coil and polyester / epoxy coating on back coil (4-7 microns) on aluminium substructure fixed with 19 mm x 12 mm x 1.6 mm aluminium cleat & 10 x 100 mm SS Wooden screw with PVC plug on faced horizontal / vertical surfaces of rectangular / circular columns, suspended ceiling Cills, jambs, canopy with including necessary aluminium frame, scaffolding etc. and making 10 mm to 20 mm wide grooves and applying non staining and non sticking waterproofing silicon sealant of and EPDM gaskets, masking tape, backer rod complete all as specified and directed.Note :- (i) Only exposed surface of ACP shall be measured and paid for.(ii) ACP Material shall be for exterior application/FR & shade as approved by Garrison Engineer. |
| 72 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 73 | M & L in replacement of point wiring for modular switches with 1.5 Sqmm, PVC insulated, unsheathed, multistranded, copper conductor Cable, FRLS, 1100 Volt grade, including 1.5 Sqmm size, PVC insulated, unsheathed, copper earth continuity conductor, connected to earth dolly, drawn through and including concealed, PVC Conduit as per latest IS and suitable size as per site requirement with all fittings such as GI metal flush box suitable for modular switches / sockets / fan regulators with cover plates, blanking plates, brass / cadmium plated screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- |
| 74 | (a) One light/fan/bell/exhaust fan point controlled by one switch. |
| 75 | (b) One 3 Pin socket outlet 5 Amps on Independent board. |
| 76 | (c) One 3 Pin socket outlet 5 Amps on same board. |
| 77 | All as per srl item No. 73 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp power point. |
| 78 | All as per item No. 73 above but wiring with 4 sq mm FRLS copper wire for industrial socket outlet 3 pin 20 / 25 Amps point and one single core 4 sq mm FRLS PVC insulated unsheathed copper cable as earth continuity conductor. |
| 79 | M & L in replacement of point wiring for modular switches with 1.5 Sqmm, PVC insulated, unsheathed, multistranded, copper conductor Cable, FRLS, 1100 Volt grade, including 1.5 Sqmm size, PVC insulated, unsheathed, copper earth continuity conductor, connected to earth dolly, drawn through in the existing conduit or in new casing & caping but with all fittings such as GI metal flush box suitable for modular switches / sockets / fan regulators with cover plates, blanking plates, brass / cadmium plated screws, cup washers etc including all cutting / chases etc in walls wherever reqd and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- |
| 80 | (a) One light/fan/bell/exhaust fan point controlled by one switch. |
| 81 | (b) One 3 Pin socket outlet 5 Amps on Independent board. |
| 82 | (c) One 3 Pin socket outlet 5 Amps on same board. |
| 83 | All as per srl item No. 76 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp power point. |
| 84 | S & F in replacement Modular Switch 1 way 16 A, 1 Module,IP20 ISI marked complete all as specified and directed |
| 85 | S & F in replacement Modular Socket 6 / 16 A - 2/3 Pin combined 2 module IP20 ISI marked complete all as specified and directed |
| 86 | S & F in replacement Modular Switch 1 way 6 /10 A, 1 Module IP20 ISI marked complete all as specified and directed. |
| 87 | S & F in replacement Modular Socket 6 / 10 A - 2 / 3 Pin combined 2 module IP20 ISI marked complete all as specified and directed. |
| 88 | S & F in replacement of Modular Bell push 6A 1 module ,IP20 ISI marked , 240 Volts complete all as specified and directed. |
| 89 | S & F in replacement Modular fan regulator step type, 120W, 2 Module IP20 ISI marked complete all as specified and directed. |
| 90 | S & F in replacement Ceiling rose surface Polycarbonate type with three terminals 240 Volts complete all as specified and directed. |
| 91 | S & F in replacement of Bell Ding Dong, 240 Volts complete all as specified and directed. |
| 92 | S & F in replacement Modular AC Box with MCB (25A, SP) Protected Socket, with sheet steel enclosure including Top Pin of 25 A, with indicator complete all as specified and directed |
| 93 | S & F in replacement Surface / wall mounted LED batten 20 W, luminaire made up of Extruded Aluminium Housing with PC diffuser, IP 40. The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 120 lumen/watt, PF ≥0.95. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed |
| 94 | S & F in replacement Bathroom Vanity Lights 15W , Lighting Fixtures Black Modern Bathroom / Bedroom Wall Lighting for Mirror (Warm White), High transmittance with acrylic cover, should give perfect spotlight for makeup, shave, read or display products, back painted iron body with acrylic plating surface is durable, safe and easy to clean, PF>0.95 and Voltage rated 220V to 240V etc complete all as specified and directed. |
| 95 | S & F in replacement Ceiling recessed mounting LED luminaire, 600 mm x 600 mm, (2' x2') 35/36 watt, luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting in office areas. The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 120 lumen/watt, PF ≥0.95, Surge Protection 3.5KV. The brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed. |
| 96 | S & F in replacement, 3 W LED Wall Mounted Light, 230 V, SP, 50 Hz, AC, Flexible Gooseneck Wall Lamps for Patient, Plug in or direct connection type, Wall Lights with USB Charging for mobile phone etc, Bedside Wall Sconces, Focused Bed Lamp, flexible gooseneck type to adjust the light direction easily, ideal for reading or precision tasks, having manual On/Off switch, Black finish with a warm white light output (2700K–3000K), gentle on the eyes and creates a cozy atmosphere especially in bedside environments complete all as specified and directed. |
| 97 | S & F in replacement ceiling recessed mounting LED SKY Lights luminaire, Printed Customised design (design as per approval by GE), 600 mm x 600 mm, (2' x2'), 36 Watts, luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting. The LEDs used should have a color consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 120 lumen / watt, PF ≥0.95, Surge Protection 3.5KV. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed. |
| 98 | Material and labour in replacement of Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in existing PVC conduit or new casing & caping of suitable size, complete with all PVC accessories and 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB complete fixing on surface / wall and removing old sub main complete all as specified and directed. |
| 99 | Material and labour in replacement of Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in existing PVC conduit or new casing & caping of suitable size, complete with all PVC accessories and 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB complete fixing on surface / wall and removing old sub main complete all as specified and directed. |
| 100 | S & F in replacement Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of RCCBs / MCBs and isolators etc and making all necessary connections complete all as directed. |
| 101 | S & F in replacement Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of RCCBs / MCBs and isolators etc and making all necessary connections complete all as directed. |
| 102 | S & F in replacement Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, DB TPN 4 way, 415 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCBs / MCBs and isolators etc and making all necessary connections complete all as specified and directed. |
| 103 | S & F in replacement RCBOs, SPN, 40 to 63 Amps capacity, 240V, 100 mA with earth leakage protection complete all as specified and directed |
| 104 | S & F in replacement RCBOs, TPN, 63 Amps capacity, 415V, 100 mA with earth leakage protection complete all as specified and directed |
| 105 | S & F in replacement MCB, SP, 40 to 63 Amps capacity, 240V, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed |
| 106 | S & F in replacement MCB, SP, 6 to 32 Amps capacity, 240V, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed. |
| 107 | Taking down carefully ceiling / exhaust fan of any size, sealing cable end, dismantling blades & removing fan and blades and refixing the same complete all as directed. |
| 108 | S & F in repairs, exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed |
| 109 | M & L for carefully carrying out concealed wiring works in existing areas including cutting/chasing/opening of walls ,slabs and gypsum /false ceiling wherever recquired for routing of conduits and cables , without causing unnecessary damage to adjoining finishes and services. The work shalll include cutting /opening of ceiling wherever recquired , temporary stacking of dismantled materials refixing /reinstallation of existing false ceiling after completion and providing additional /new gypsum false ceiling wherever damaged or not resuable, including GI framework,hangers, perimeter channels, jointing, finishing, screw fixing and all necessary accessories. The work shall include making good to the disturbed surfaces, finishing joints with approved jointing compound sanding and matching existing texture/finish including painting/touch up to match existing ceiling appearance complete in all respects as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 23 days
Sep 07, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 23 daysSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender