Tender For Repair/Replacement Of Joinery/Plastering, Flooring, Plinth Protection, Rain Water Pipe, Sanitary Appliances & Misc B/R Items Of Water Supply Installation Under Ge (Af) Adm Area Gwalior.
Tender Value
49 Lakhs
Estimated cost
Bid Submission
08 Aug 2026
13 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Joinery/Plastering, Flooring, Plinth Protection, Rain Water Pipe, Sanitary Appliances & Misc B/R Items Of Water Supply Installation Under Ge (Af) Adm Area Gwalior.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed. |
| 2 | M&L for brick work with subclass B bricks old size straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 3 | Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key & scrubbing down with water etc. complete all as specified and directed. |
| 4 | M&L for 10mm thick ready mix plaster on brick wall, concrete surface finished even and smooth without using extra cement complete all as specified and directed |
| 5 | M&L for 15mm thick ready mix plaster on brick wall, concrete surface with finished even and smooth without using extra cement complete all as specified and directed |
| 6 | M&L for 5mm thick ready mix plaster on ceiling /facia/roof projection and finishing even and smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for preparing new plaster surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 8 | M&L for complete removal of existing treatment on old ceiling surface and applying two coats of white wash complete all as specified and directed. |
| 9 | M&L for preparing new plaster surfaces of Walls and applying two coats of Distemper Oil Emulsion over a coat of primer complete all as specified and directed. |
| 10 | M&L for complete removing existing treatment on wall surface and applying two coats of Distemper Oil Emulsion over one coat of primer complete all as specified and directed. |
| 11 | M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/Litre and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over new plaster surfaces of walls complete all as specified and directed. |
| 12 | M&L for complete removal of existing treatment and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over old surfaces of walls complete all as specified and directed. |
| 13 | Taking down chowkat or frames with shutter (without taking off shutters from the frames) n.exc 1.5 Sqm including iron mongery complete all as specified and directed. |
| 14 | Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including iron mongery and cutting holes for hold fasts & making good complete all as specified & directed. |
| 15 | Refixing of shutters of any description exceeding 1 sqm but not exceeding 2 sqm each in same or other opening(s) after resecuring or easing & adjusting, including taking down shutter from chowkat or frame complete all as specified and directed. |
| 16 | S&F for Factory Made Solid extruded Wood Polymer Composite solid door/window/ceosetory window & other frame chowkhat of sie 65x125 mm comprising of virgin polymer of K value 58-60,calcium carbonate and natural fibres and non toxic additives fabricated with miter joints after applying pvc solvent and screwed with full body threaded star headed ss screws having minimum frame density of 750kg/cum,screw withdrawl strength of 2200 N and 1100N,minimum compressive strength 58 N/mm2, modules of resistance 900N/mm2 & resistance to & fixing in position with holdfast /lugs/ fasterners of required depth as per directions of engineer-in-charge complete all as speciifed and directed. |
| 17 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as speciifed and directed. |
| 18 | S&F 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 500 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings.The wire gauge shall be stretched to tighten firmly complete all as speciifed and directed. |
| 19 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as speciifed and directed (M.S. hold fast/ lugs or SS dash fasteners shall be paid separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. |
| 20 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as speciifed and directed.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 21 | S&F Providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories, complete all as speciifed and directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.(A) Area not exceeding 2.00 sqm each |
| 22 | Supply only 8mm thick glass as approved by GE complete all as speciifed and directed. |
| 23 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed . |
| 24 | S&F for mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, cooler platform, frame work of water tanks and similar work including welding conforming to Fe-290 & grade E-165 etc complete all as speciifed and directed. |
| 25 | S& F Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required:hooks (stay), heavy, for largegates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to woodtrusses or rafters; knee piece inserts; two way and three way straps, plate washers and similarsmall articles conforming to Fe-290 Gde-E-165 etc complete all as speciifed and directed. |
| 26 | M&L for PCC 1:2:4 type B-1 (using 12.5 mm graded stone aggregate) as in posts, holdfasts including necessary formwork as per site requirement complete all as speciifed and directed. |
| 27 | S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks, or galvanised wire staples complete all as speciifed and directed. |
| 28 | S & F 4mm thick Sheet glass, ordinary quality in square in not exc 0.5 sq.m in each pane complete all as specified and directed. |
| 29 | Hacking out old broken glass panes 4 mm thick from steel/Aluminium frame including putty/ metal beadings and supply and fix sheet glass ordinary 3 mm thick, in squares n.exc. 0.50 Sqm in each pane including necessary arrangement new oil putty or with existing metal beadings (up to third floor) complete all as specified and as directed |
| 30 | Hacking out old broken glass panes 4 mm thick from wooden framed shutters including putty/wooden beadings and supply and fix sheet glass ordinary quality, 3 mm thick, in square n.exc. 0.5 Sqm in each pane including necessary arrangement oil putty/wooden/metal beads complete all as specified and as directed. |
| 31 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window and Steel door / window, completed all as specified and directed. |
| 32 | S&F Stainless Steel hinges medium weight butt hinges of 100 mm size complete all as specified and directed. |
| 33 | S&F Stainless Steel handle 150 mm size complete all as specified and directed. |
| 34 | S&F 150mm long Stainless Steel barrel tower bolts of extruded section complete all as specified and directed. |
| 35 | S&F stainless Steel barrel tower bolts fixed 100mm long complete all as specified and directed. |
| 36 | S & F 250mm long Stainless Steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Stainless Steel complete all as speciifed and directed. |
| 37 | Supply and fixing of Capsule door closer of size 300mm in wooden/steel frame by welding or screwing as which ever is appropriate for fixing in frame complete all as specified and directed. |
| 38 | S & F for 140mm Floor door stopper of Stainless Steel body and tongue, anodised, with hard drawn steel spring over all complete as specified and directed. |
| 39 | M&L two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces on new wooden surfaces of any description not otherwise described over 10 cm width or girth complete all as speciifed and directed. |
| 40 | M&L one coat of synthetic enamel paint over old painted surface of wood work of any description over 10 cm width or girth including preparation of old surfaces complete all as specified and directed. |
| 41 | Dismentling of floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 42 | Demolition of PCC/stone slab in ground floor n.exc15cm thickness below or above ground level complete all as specified and directed. |
| 43 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling,mass concrete,sub base etc complete all as specified and directed. |
| 44 | M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in coping, kersbs, mud stops rounded or chamfered in edges etc, finish even & fair without using extra cement complete all as specified and directed including necessary formwork as per site requirement |
| 45 | M&L for PCC type B-0 1:2:4 (using 12.5mm aggregate ) as in floor leveling to recive the Screed/PCC complete all as specified and directed. |
| 46 | M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone agg) as in plinth protection finished even and smooth with using extra cement complete all as specified and directed. |
| 47 | M&L glazed colour ceramic coloured tiles 450 x 300 x 7mm thick in vertical surfaces such as skirting dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles including fixing with neat cement based over 10mm thick plaster cement motar 1:4 complete all as specified . |
| 48 | M&L for coloured non skid ceramic tiles joint free floor tiles 7- 8 mm thick (square/rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc ncluding fixing with neat cement over screed bed or bedding layer of mortar 15 mm thick CM 1:6 complete all as specified and directed. |
| 49 | M&L for coloured non skid ceramic tiles joint free floor tiles 7- 8 mm thick (square/rectangular) area of each tiles exc. 0.18 sqm but not exc. 0.38 sqm, in floors etc ncluding fixing with neat cement over screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed. |
| 50 | M&L coloured ceramic tiles joint free non skid coloured ceramic tiles 7- 8 mm thick (square/rectangular) area of each tiles exc. 0.18 sqm but not exc. 0.38 sqm, in skirting etc ncluding fixing with neat cement over dado or bedding layer of mortar 10 mm thick plaster cement motar 1:4 complete all as specified and directed. |
| 51 | Demolition stone slabs and tiles of laid bedded and pointed in any mortar any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 52 | M&L Granite (of any type) work, 20 mm thick (Table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms in cm 1:4 and including pointing in white cement 1:2, using marble dust with admixture of pigment to match with marble shade of Granite including half moulding of granite edges including screed bed 20mm thick in cm 1:6 complete all as specified and directed. |
| 53 | M&L for machine cut Kota stone slab 20 to 25mm thick Mirror polished in treads, landings of stair case over cement screed bed laid and jointed wilth grey cement slurry mixed with pigment to match the shade of the slab lincluding & grinding polishing over and including screed bed 20mm thick in cm 1:6 complete all as speciifed and directed. |
| 54 | M & L for machine cut Kota stone slab as in skirting, risers 20 to 25 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with mirror polish granite finish including backing coat 10 mm thick in CM 1:3 complete all as specified and directed. |
| 55 | M & L for Sand filling under floors or in foundations including watering and consolidation etc complete all as speciifed and directed. |
| 56 | M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment laid in floor and joints of interlocking tiles/ paver block to be filled with fine sand and broomed etc complete all as specified and directed. |
| 57 | Dismantling existing sunken interlocking pavers block of any description, size and pattern and refixing the same in any location for proper matching with existing surface after carrying out the necessary repair to the under layer complete all as specified and directed. Note: Sand cushioning and sub base concrete will be measured separetely |
| 58 | M&L for chequred tiles of approved design,colour & of ( size 300mmx300mmx25mm) set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles & includind 20 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and as directed |
| 59 | M&L Precast cement concrete 1:3:6 type C1 (Using 20mm graded stne aggregate) for Kerb stone (Factory made) of size 20cm x10cmx30cm and set in cement mortar 1:4 (1 cement: 4 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified complete all as specified and as directed. |
| 60 | Demolition of reinforced cement concrete in Roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work complete all as specified and as directed. |
| 61 | M&L formwork to chullah hoods, chajjas, trough and similar itmes including edges complete all as specified and directed. |
| 62 | Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 63 | M&L reinforced Cement concrete (1:2:4) type B-1, ( 20 mm graded aggregate ) as in chajjas/roof projection/RCC railing repairs as in similar wk complete all as specified and directed. |
| 64 | Demolition of reinforced cement concrete in ground floors etc not exceeding 15cm thickness as drain cover and similar works complete all as specified and as directed. |
| 65 | M&L for precast reinforced concrete 1:2:4 type B1 using 20 mm graded stone aggregate for drain cover slab set in and pointed in CM 1:6 including necessary formwork complete all as specified and as directed. Note: Reinforcement shall be measured and paid separately. |
| 66 | Demolition of cement concrete (unreinforced) in Roofs, floors (other than ground floors), tiles including any type of existing roof treatment (screed plaster, Brick tiles & tarfelt of any description) and removing to a distance exc. 500 m and n.exc. 1.5 Km from site complete all as specified and directed. |
| 67 | M&L for screed bed 10mm thick cm 1:4 on fair face of concrete surface with mixing WPC @ 200 ml per bag of cement finished even and smooth without using extra cement. WPC will be paid separately complete all as speciifed and directed. |
| 68 | M&L for hybrid (acrylic+polyurethane) based waterproofing flexible liquid applied membrane single component, three coat system reinforced with fibre mesh having crack bridging upto 2mm and elongation upto 200% and Dry film thickness DFT 1000 microns with heat reflective system for all types of exposed roof slabs (new and old) terraces (sloped and flat) complete all as speciifed and directed.Note :- Preparation of surfaces including application and quantity to be applied per coat, will be all as per manufacturer's instructions of the approved makeMake :- Dr Fixit Roofseal Classic/Sika Cool Coat/Asian Paint smart care PU magnum |
| 69 | Supply only Liquid water proofing compound complete all as speciifed and directed. |
| 70 | Disconnecting existing tanks of capacity exc 250 litre but n. exc 500 litre for repair work and refixing the same after repair work is over complete all as speciifed and directed. |
| 71 | Disconnecting existing tanks of capacity of tank exc 500 litres and n. exc 1000 litres for repair work and refixing the same after repair work is over complete all as speciifed and directed. |
| 72 | Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in Concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground, complete all as specified and directed. |
| 73 | M&L Cement concrete type B1 1:2:4 (20mm graded aggregate ) as in foundation/bed block for Posts and Struts incl formwork all as specified and as directed |
| 74 | S&F,mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, running bars, for chain link fencing including embeding in concrete and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 75 | Dismantling fencing wire mesh/ barbed wire any type complete all as specified and directed. |
| 76 | M&L two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth complete all as specified and directed |
| 77 | M&L one coat of synthetic enamel paint over old painted surface of steel work of any description over 10 cm width or girth including preparation of old surfaces complete all as specified and directed. |
| 78 | Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 30cm long and dia of neck n.exc 12mm complete all as specified and directed. |
| 79 | Supply only galvanised chain link MS Galvanised fencing any size or type as approved by Engr-in -charge etc complete all as speciifed and directed. |
| 80 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed |
| 81 | S&F in repair 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC buildg board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed. |
| 82 | S & F in repair Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed. |
| 83 | S&F in repair brass chromium plated shower roses with swivel joints, 125 mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed. |
| 84 | M&L in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 85 | M&L in repair PVC(SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified directed. |
| 86 | S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float including flush pipe, handle, bracket PVC short/long bend etc. complete all as specified and directed. |
| 87 | S&F in repair Vitreous China wash basin, flat back, size 450x300mm white, including waste pipe excluding taps, chain and plug and porcelain stopper but including brackets complete all as speciifed and directed. |
| 88 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) 'P' or 'S' trap complete all as specifed and as directed. |
| 89 | S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed. |
| 90 | S&F in repair angle cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore complete all as specified and directed. |
| 91 | S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore complete all as specified and directed. |
| 92 | S&F in repair Pillar taps fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as speciifed and directed. |
| 93 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed. |
| 94 | Dismantling tanks water tank exc 250 but n exc 500 Ltr. complete all as specified and directed. |
| 95 | S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with fitting etc. of 20 mm dia directed complete all as specified and as directed. |
| 96 | Dismantling tanks water tank exc 500 but n exc 1000 Ltr. complete all as specified and directed. |
| 97 | S&F rotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with fitting etc. of 20 mm dia directed complete all as specified and as directed. |
| 98 | Cutting chases, pinning in, stone concrete block or slabs wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth and removal of debris otside of MOD land complete all as speciifed and directed. |
| 99 | S & F of CPVC pipes 25mm all SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 20 mm GI pipe complete all as speciifed and directed. |
| 100 | S&F of 25 mm dia CPVC brass elbow complete all as specified and as directed. |
| 101 | S&F of 25 mm dia CPVC Brass Tee complete all as specified and as directed. |
| 102 | S&F of 25 mm dia female/male brass threaded adapter complete all as specified and as directed. |
| 103 | S&F of CPVC pipes 20mm all SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified. |
| 104 | S&F of 20 mm dia CPVC brass elbow complete all as specified and as directed. |
| 105 | S&F of 20 mm dia CPVC Brass Tee complete all as specified and as directed. |
| 106 | S&F of 20 mm dia female/male brass threaded adapter complete all as specified and as directed. |
| 107 | S&F inn repair 25 mm internal bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) complete all as speciifed and directed. |
| 108 | Dismantling of cast iron or renforced drain pipe 100mm/75mm dia of any description complete all as specified and directed. |
| 109 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 110 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in floor or trenches complete all as specified and directed. |
| 111 | S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 112 | S&F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors/trenches complete all as specified and as directed. |
| 113 | S & F 75 mm PVC (SWR) junction single, (singl T ) (equal or unequal ), ordinary or inverted ( spigot or socket type ) or with paralle oval access doors branches complete all as specified and directed. |
| 114 | S& F PVC SWR 110 mm bends any radius complete all as specified and directed. |
| 115 | S & F 75 mm PVC (SWR) bends any radius diminishing pieces or tapers (larger bore measured) .complete all as specified and directed. |
| 116 | S & F 110mm PVC (SWR) vent cowl. Complete all as specified and directed. |
| 117 | S & F 110 mm PVC (SWR) WC Connector bent type sanitary connection socket to fit wc out let complete all as specified and directed. |
| 118 | S & F 110 mm PVC (SWR) P Trap (110/110mm bore) complete all as specified and directed. |
| 119 | S & F in repair stack clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roofs for bore of 100mm complet all as specified and directed. |
| 120 | S & F in repair stack clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roofs for bore of 75 mm complet all as specified and directed. |
| 121 | M&L for greasing and oiling of rolling shutters (manually operated) including replacement of small parts such as lock, damaged strip, if any, straightening of guide channel and other small articles to making it functional complete all as specified and directed. |
| 122 | M&L for greasing and oiling of rolling shutters (Gear box operated) including replacement of small parts such as lock, damaged strip, if any, straightening of guide channel and other small articles to making it functional complete all as specified and directed. |
| 123 | M&L for removing/cutting trees, vegetation, digging out roots from concrete or brick wall, filling holes on building (block of 4/6 qtrs) wall/roof/chhajja/water tank staging area etc and making good with cement mortar 1:4 complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender