Tender For Repair To Internal Water Supply, Sunken Floors, Sanitary Fittings, Flooring, Plastering, Skirting And Tiling Incl Certain Allied Works At R & De(E) Dighi, Pune
Tender Value
25 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
19 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Internal Water Supply, Sunken Floors, Sanitary Fittings, Flooring, Plastering, Skirting And Tiling Incl Certain Allied Works At R & De(E) Dighi, Pune
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of floors health or walls tiling and Stone floor including cement mortar bedded & removing serviceable tiles to store and rubbies of the premises |
| 2 | Demolition of cement concrete in ground floors and pavings n exc 15 cm (below or above ground level) |
| 3 | M&L in repair of 25mm thick PCC 1:2:4 type B-0( 12.5 mm graded stone aggre) as in sub base of floor |
| 4 | M&L for 15mm thick Screed bed or bedding layer of mortar in CM 1:4 for laying floor finishes |
| 5 | M&L for Rendering 10mm thick (as backing coat) on fair faces of brick work or concrete sufaces in CM 1:3 complete. |
| 6 | M&L for Double charged Vitrified tiles as in flooring and skirting of Light shade 9 to 10mm thick (square/ rectangular) polished area of each tiles size exc 0.11 sqm but n exc 0.36 sqm, 9 to 10 mm thick in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 7 | M&L for Coloured Non Skid ceramic tiles 8 to 9 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.16 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 8 | M&L for coloured Glazed ceramic tiles in vertical surfaces 450/ 600x300 mm thickness as per manufacture ( With two borders and mothiff pattern ) / High lighter tiles on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to matchover a backing coat of 10 mm thick plaster in CM 1:4 including dubbing out coat to an average thickness of 10 mm thick in CM (1:6) , complete all as specified and directed. |
| 9 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site. |
| 10 | Ditto- but exceeding 1.5 Sqm but not exceeding 4 Sqm each. ( Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) |
| 11 | Taking down Shutters of any description exc 1 sq. m but n exc 2 sqm each |
| 12 | S&F factory made solid panel PVC shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stylies and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stylie & rails with sutailble PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification and drawings. |
| 13 | S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in oppining as per specification and drawing. |
| 14 | S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides |
| 15 | S&F Aluminium, anodised barrel tower bolt 150 mm |
| 16 | S&F Aluminium alloy , anodised sliding door bolt with hasp, staple ( Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed 300 mm |
| 17 | S&F Aluminium handles fabricated type 150 mm |
| 18 | S&F Aluminium handles fabricated type 100 mm |
| 19 | M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 20 | S&F Mild steel cold rolled Butt hings 100 mm medium weight |
| 21 | S&F aluminium powder coated frame for doors, windows, partitions and ventilators with one or more rebates including necessary jointing cleat for fixing etc complete all as specified. |
| 22 | S&F anodised aluminium window and ventilator shutter sliding type without sash bar , aluminium section weighing 0.55 Kg/Mtr including necessary jointing cleat glazing clips rubber packing anodised aluminium snap beading screws, rollers, locks etc complete all as specified. |
| 23 | Hacking out old broken glass from metal frame including punching or drilling out old glazing pins/spring clips and providing and M&L for sheet glass ordinary quality 3 mm thick fix in window/vent shutter area n exc 0.50Sqm in each pane complete all as specified and directed.fixing new ones |
| 24 | M&L for 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane |
| 25 | S&F in repairs 100 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 26 | S&F in repairs 150 mm long aluminium, anodised, or matt finished barrel tower bolts of extruded section complete all as specified and directed. |
| 27 | S&F in repairs 150 mm size extruded aluminium alloy bow handles, fabricated type with plate, matt or anodised finish |
| 28 | S&F in repairs floor door stopper 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 29 | S&F in repairs Aluminium alloy , anodised sliding door bolt with hasp, staple ( Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed 300 mm |
| 30 | S&F in repairs 25mm bore stainless steel 304 grade curtain rods with suitable fancy type brackets and fixed in position using stainless steel screws complete |
| 31 | S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples (304 Grade) |
| 32 | S&F in repair 18mm thick prelaminated particle board interior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen cabinets etc fixed with screw including 3mm thick, ist class HW(TW) beading all around on edging to timber frame work all as specified and directed. |
| 33 | S&F in repairs stainles steel sink coupling with stainless jali complete all as specified and directed by Engr in charge. |
| 34 | S&F in repair brass half turn spindle complete all as specified and directed by Engr in charge. |
| 35 | S&F in repairs 450mm x 600mm PVC body cabinet Mirror and fixing to the wall with suitable screws etc Make: Prayag/ Shakti |
| 36 | S&F in repairs PVC flexiable waste pipe for sink and wash basin complete all as specified and directed by Engr in Charge. |
| 37 | M&L for rendering 15 mm thick in cement motor 1:3 with using water proofing compound @ 3% by weight of cement, surface finished even and smooth without using extra cement.( Note: WPC shall be included deemed cost) |
| 38 | M&L for water proffing treatment of sunken floor of WCs bathrooms etc by applying the following specification (i) cleaning of sunken floor with wire brush/air blower and remove dirt ,dust (ii) Applying cement slurry mixed with acrylic based polyer modified cementious composite compound coating hydroproof Xtra of FOSROC or equivalent of Dr fixit or Pidilite industries ltd in the ratio of 1:2:4 (one part of acrylic polymer two part of water and four part of cement (iii) First layer of cement slurry @0.444 kg/Sqm mixed with acrylic based modified cementious composite compound @ 0.222litre /sqm and allow it to air dry for 4 hour (iv) Second layer of cement slurry @0.222kg/sqm mixed with acrylic based dified cementiour composite compound @0.111 litre/sqm and allow it to air dry for 4 hour followed with water curing for 48 hours (v) 200micron thick polythen film shall be pasted with the help of adhesive over treatment . Note : Joints of WC/Trap/Soil waster shall be properly sealted with sealing compound . Testing of all traps and joints and sunken slab shall be done as per IS -1742 before filling and tiling work as directed by Eng in charge. |
| 39 | M&L for PCC 1:5:10 type E2 as in filling under floor (20 mm graded broken bricks aggregates ) as in foundation and mass concrete complete all as specified and directed by Engr in charge. |
| 40 | Material and labour in repair for Granite(of any type) 18 to 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade including noising and rounding edges of stone slab and as specified and direceted by Engr in Charge. |
| 41 | M&L in repair for green marble work 18 to 20mm thick ( table rubbed and polished ) in steps,jambs,pillers,window cills,cooking platform and like in cement mortor (1:4) including pointing with white cement (1:2) using marble dust with admixture pigment to match with marble shade including noising and rounding edges of stone slab as specified and direceted by Engr in Charge. |
| 42 | M&L for Machine cut cudappa stone slab as in horizontal or vertical 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and noising and rounding edges of stone slab complete |
| 43 | Taking down 15mm bore steel water tubing and connections complete all as specified and directed. |
| 44 | S&F 15 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 45 | Taking down 20mm bore steel water tubing and connections complete all as specified and directed. |
| 46 | S&F 20 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 47 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
| 48 | S&F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 15 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 49 | S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 50 | S&F in repairs 10 liters capacity PVC low level flushing cistern with ISI marked body, fixed in repairs complete all as specified and directed.Make : Parry ware Slim line or any other approved make. |
| 51 | S&F in repairs 15 mm bore, 60 cm long PTMT connecting pipe fitted with unions to connect iron pipe to PVC pipe on both ends complete all as specified and directed. |
| 52 | S&F in repairs 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, chromium plated for iron pipe or for unions angle cock complete all as specified and directed. |
| 53 | S&F in repairs plastic water closet seat, white closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and directed. |
| 54 | S&F in repairs brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union complete all as specified and directed. |
| 55 | S&F in repairs for pillar taps 15 mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 56 | S&F in repairs for swan neck pillar taps 15 mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 57 | S&F in repairs 15 mm bore pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms) complete all as specified and directed. |
| 58 | S&F in repairs 15 mm bore bib taps, fancy type cast copper ally chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 59 | S&F in repairs 600 mm x450 mm bevealed edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and washers as in repairs complete all as specified and directed. |
| 60 | S&F in repairs 15 mm bore three in one Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 61 | S&F in repairs vitreous china squatting pan , ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish . |
| 62 | S&F in repairs, vitreous China wash down water closet pan, (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, flush pipe for joining etc complete. |
| 63 | S&F in repairs sink made of stainless steel 1.00 mm thick kitchen with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm and PVC waste pipe of 32mm bore and of suitable length, complete all as specified. |
| 64 | S&F in repair for vitreous China wash basin, white, flat back, size 580x450mm including necessary brackets,cp couplings, pvc waste pipes etc. complete all as specified and directed. |
| 65 | S&F in repair for vitreous China wash basin, white,counter type, size 550 x 425 x 180mm including necessary brackets,CP couplings, waste pipes etc. complete all as specified and directed. |
| 66 | S&F in repairs 15mm bore CP brass health faucet of 1.2m long including brass holders, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed |
| 67 | S&F in repairs 15mm bore CP brass two way bib cock, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed |
| 68 | S&F in repairs gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed to 20mm bore pipe. |
| 69 | S&F in repair PVC floor trap/nahani trap incl stainless steel gratings, 75/100 mm dia of outlet, including jointing to waste pipe fixed in cement concrete type B1(1:2:4). |
| 70 | Removing of debries (Concrete debries, tiles etc) where directed out side the MD Land (R&DE Dighi) Camp area. |
| 71 | S&F in stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples (304 Grade) complete all as specified and directed. |
| 72 | S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised with 40 mm width flaps when open complete all as specified and directed. |
| 73 | Taking down cement plaster from brick / concrete/ stone surfaces including racking out joint , hacking for key and scrubing down with water etc all as specified and directed. |
| 74 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces of any description in CM 1:6 and finishing the surface with Sagol Finish, all as specifiied and directed. |
| 75 | M&L rendering 10mm thick in cm 1:4 on brick or concrete of any description finished even and fair without using extra cement and using water proofing compound etc all as specified and directed. Note: WPC will be measured and paid seperately |
| 76 | M&L for Rendering 20mm thick in two coats on fair faces of stone masonry surfaces in CM 1:4 using WPC on second layer all as specified and directed. Note: WPC shall be measured and paid seperatly. |
| 77 | Taking down old cement plaster from ceiling concrete surface, scubbing down with water etc, and plastering 5mm thick in CM 1:3, complete. |
| 78 | M&L for preparation of newly cement plastered wall surface and applying two coat of oil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering and a coat of primer |
| 79 | M&L Preparation of newly plastered surface of wall, applying two coats of exterior acrylic emulsion over a coat of exterior acrylic primer after preparation of surfaces at any height including necessary scafolding etc complete all as specified and as directed. |
| 80 | M&L Preparation of newly plastered surface of wall, applying two coats of cement based paint over a coat of exterior primer after preparation of surfaces at any height including necessary scafolding etc complete all as specified and as directed. |
| 81 | M&L for preparation of newly plastered ceiling surface and applying three coats of white wash complete |
| 82 | Supply only integral water proofing compound |
| 83 | M&L Preparation of old surfaces of wall and applying one coat of white wash and ceiling on walls complete all as specified and directed by Engr-in-Charge. |
| 84 | M&L for preparation of newly plastered ceiling surface and applying three coats of white wash complete |
| 85 | M&L Preparation of old distempered surfaces of wall and ceiling applying one coat of oil bound distemper etc all as specificed and directed. |
| 86 | M&L Preparation of old distempered surfaces of wall and celing and applying two coat of oil bound distemper as specified and directed by Engr-in-Charge |
| 87 | M&L Complete removal of existing treatment including Washing, rubbing down and stopping etc distembered wall surfaces and M&L for two coats of distemper oil emulsion over a coat of primer including wall care putty to make surface even and smooth, preparatory to distempering, priming plastered and other surfaces on existing plastered surface. |
| 88 | M&L Preparation of old painted surfaces of wall/ceiling and applying one coat of Luster paint all as specificed and directed. |
| 89 | M&L Complete removal of existing treatment including Washing, rubbing down and stopping etc distembered wall surfaces and Two coats of Lustre paint over a coat of primer including one coat wall care putty preparatory to distempering, priming plastered and other surfaces on existing plastered surface. |
| 90 | M & L for one coat of cement base paint on walls incl, preparation of old decoreted surfaces complete all as specified and directed by Engr - In - Charge. |
| 91 | M&L Preparation of old plaster surface of walls and applying two coats of cement base paint etc all as specified and directed. |
| 92 | M & L for one one coat of weather proof exterior paint on walls incl, preparation of old decoreted surfaces complete all as specified and directed by Engr - In - Charge. |
| 93 | M&L Complete removal of existing treatment on wall surfaces, fins, fascias etc by scrubing, sand papering and applying two coats of weather proof exterior paint (Apex ultima or Dulux or equivalent) white or tinted over a coat of acrylic exterior primer incl nescessary scafolding all as specified and directed. |
| 94 | M&L Preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 95 | M&L Preparation of old painted surfaces of steel & iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st quality) etc all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender