Tender For Upgradation & Renovation Of Damaged Green Tax Barrier, Aloo Ground, Manali Tehsil Manali , District Kullu , H.P
Tender Value
90.68 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
5 days left
EMD
1.81 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kullu → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Upgradation & Renovation Of Damaged Green Tax Barrier, Aloo Ground, Manali Tehsil Manali , District Kullu , H.P
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth including carriage of material up to all leads and lifts and as per direction of Engineer incharge dumping site/disposal site shall be arranged by the contractor at he own cost and nothing shall be paid extra. |
| 2 | All kinds of soil |
| 3 | Stone /Boulder filling under floor dry hand packed including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth including carriage of material up to all leads and lifts and as per direction of Engineer incharge dumping site/disposal site shall be arranged by the contractor at he own cost and nothing shall be paid extra. |
| 5 | Ordinary rock |
| 6 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials including carriage of material up to all leads and lifts and as per direction of Engineer incharge dumping site/disposal site shall be arranged by the contractor at he own cost and nothing shall be paid extra. |
| 7 | All kinds of soil |
| 8 | Ordinary or hard rock |
| 9 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil including carriage of material up to all leads and lifts and as per direction of Engineer incharge dumping site/disposal site shall be arranged by the contractor at he own cost and nothing shall be paid extra. |
| 10 | All kinds of soil. |
| 11 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils including carriage of material up to all leads and lifts and as per direction of Engineer incharge dumping site/disposal site shall be arranged by the contractor at he own cost and nothing shall be paid extra. |
| 12 | Ordinary rock |
| 13 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 15 | 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) |
| 16 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 17 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 18 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 19 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 20 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 21 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 22 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 23 | 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) |
| 24 | Centering and shuttering including strutting, propping etc. and removal of form for including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 25 | Foundations, footings, bases of columns, etc. for mass concrete |
| 26 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 27 | Suspended floors, roofs, landings, balconies and access platform |
| 28 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 29 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 30 | Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 31 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 32 | All works upto plinth level |
| 33 | All works above plinth level upto floor V level |
| 34 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 35 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 36 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 37 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 38 | Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 39 | Brick work with common burnt clay F.P.S. (non modular) bricks of 2nd class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 40 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 41 | Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 42 | Light shade pigment using white cement |
| 43 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 44 | 600x600 mm |
| 45 | 20 mm cement plaster of mix including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 46 | 1:4 (1 cement: 4 fine sand) |
| 47 | 12 mm cement plaster of mix including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 48 | 1:4 (1 cement: 4 fine sand) |
| 49 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 50 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 51 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 52 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 53 | Two or more coats on new work |
| 54 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 55 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 56 | Area of slab over 0.50 sqm |
| 57 | 15 mm cement plaster on the rough side of single or half brick wall of mix including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 58 | 1:4 (1 cement: 4 fine sand) |
| 59 | Providing and fixing Kullu Local stone Gadsa for cladding on External Surface8mm to 15mm thickin cement plaster 1:3(1cement:3 sand) and jointed with cement slurry i/c scaffolding etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 60 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Deodar Wood |
| 61 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 62 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 63 | Providing and fixing factory made uPVC wooden colour texture casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 64 | Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). |
| 65 | Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm). |
| 66 | Providing and fixing glazing in aluminium/UPVC door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 67 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) |
| 68 | Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 69 | roviding and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 70 | 300x10 mm |
| 71 | 250x10 mm |
| 72 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 73 | 125 mm |
| 74 | 100 mm |
| 75 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 76 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 77 | Single rubber stopper |
| 78 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 79 | 300x16 mm |
| 80 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 81 | Providing and fixing Godrej premium cylindrical lock with 3 keys for PVC doors, suitable for left & right-handed doors with inside/outside opening, brass finish, including necessary screws, fittings, and metal adapter/mounting plate for hollow PVC door complete, including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 82 | Providing and fixing Galvanised iron ceiling frame work support system including main runners, cross channels, hangers, brackets, fasteners, bolts, nuts, washers, hold-fasts, rawl plugs, necessary carriage, cutting, drilling, alignment and all other accessories complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 83 | Providing and fixing PVC false ceiling in approved wooden shade colour , by directly fixing PVC ceiling panels to existing ceiling/substrate/GI framework (already paid separately), including all materials, approved fixings, edge trims, neat joints, cut-outs for light fittings, fans, AC grills, accessories, labour, tools, scaffolding and incidental works complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 84 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 85 | Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accessories including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 86 | Providing and fixing ridges or hips 60 cm overall with 0.60 mm thick pre‑printed steel sheets in roofing with hot dipped metallic zinc coated sheets having top coat of modified polyester organic coating of 20 microns over 5 microns primer + back coat of polyester of 5 microns over 5 microns primer, including fixing with pre‑printed iron J or L hooks, 6 mm dia bolts & nuts, pre‑printed G.I. limpet & bitumen washers and all accessories complete, as required, including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 87 | Providing and fixing valley 60 cm overall 0.60mm thick preprinted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic outing of 20 microns over 5 microns primer coating back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 88 | Providing and fixing M.S. B.P. sheet 1.66 mm to 2.00 mm thick on eaves board / fascia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying one coat of red‑lead primer complete, as per the instructions of the Engineer‑in‑Charge. (Base steel work members shall be measured and paid for separately.) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 89 | Providing and fixing 15 cm wide, 45 cm overall semicircular plain G.I. sheet gutter with iron brackets 40×3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipe complete as per design including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 90 | 0.80mm thick sheet. |
| 91 | Applying priming coat including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 92 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 93 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 94 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
| 95 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer including carriage of material upto all leads and lifts and as per direction of Engineer incharge. M.S. tube |
| 96 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 97 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 98 | 15 mm nominal outer dia |
| 99 | 20 mm nominal outer dia |
| 100 | 25 mm nominal outer dia |
| 101 | Providing and fixing on wall face unplasticised rigid PVC soil, waste and rain water pipes conforming to IS:13592 (Type A for rain water / Type B for waste as required), including jointing with seal ring conforming to IS:5382 or solvent cement as applicable, leaving 10 mm gap for thermal expansion, complete with fixing clips, supports and testing of laid pipeline for water-tightness, including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 102 | 75 mm diameter |
| 103 | 110 mm diameter |
| 104 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 105 | Coupler - 75 mm |
| 106 | Coupler - 110 mm |
| 107 | Single tee with door - 75x75x75 mm |
| 108 | Single tee with door - 110x110x110 mm |
| 109 | Single tee without door - 75x75x75 mm |
| 110 | Single tee without door - 110x110x110 mm |
| 111 | Bend 87.5° - 75 mm bend |
| 112 | Bend 87.5° - 110 mm bend |
| 113 | Shoe (Plain) - 75 mm |
| 114 | Shoe (Plain) - 110 mm |
| 115 | Providing and fixing One-piece European Water Closet (EWC) made of white vitreous china, complete with in-built flushing cistern, duroplast slim soft-close seat cover, siphonic jet flushing system, of overall size 650 × 345 × 720 mm, Catalogue No. S1013247 (Clayton Pro or equivalent approved make), including all floor fixing bolts, connectors, sealing compound, accessories, concealed S-trap, testing, commissioning and making the unit fully functional, including cutting and making good the walls and floors wherever required, complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 116 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 117 | 15mm nominal bore |
| 118 | Providing and fixing uplasticised PVC connection pipe with brass unions including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 119 | 30 cm length 15 mm nominal bore |
| 120 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 121 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 122 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 123 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 124 | 15 mm nominal bore |
| 125 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 126 | 15 mm nominal dia |
| 127 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Kitchen sink with drain board |
| 128 | 510x1040 mm bowl depth 178 mm |
| 129 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 130 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 131 | Circular shape 560 mm internal dia |
| 132 | Providing and fixing soil, waste and vent pipes Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 133 | 100 mm dia |
| 134 | Providing, supplying and fixing PVC floor trap with effective water seal and 110 mm/100 mm nominal outlet in floor slab/finished surface, including connection to PVC drain pipe with solvent cement/jointing as required, and fixing 304-grade stainless steel grating of approved size and design over the trap, complete with frame, inner and outer cups, supports and making good the surrounding floor, testing for watertight performance, including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 135 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 136 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 137 | Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 138 | All kinds of soil |
| 139 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 140 | With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 |
| 141 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 142 | 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. |
| 143 | Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 144 | 450 mm dia RCC pipes. |
| 145 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 146 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 147 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 148 | On steel work |
| 149 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 150 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 151 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 152 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 153 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 154 | With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 |
| 155 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 156 | 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) |
| 157 | 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) |
| 158 | Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Cement concrete prepared with batch mixing machine |
| 159 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Semi rigid pipe |
| 160 | 32 mm dia |
| 161 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 162 | Providing and fixing 100 mm dia PVC weep holes in retaining wall with 1:20 slope, complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 163 | Electrical Work :- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm HRFRLS-LF (HEAT RESISTANT FLAME RETARDANT LOW SMOKE HALOGEN - LEAD FREE) PVC insulated copper conductor single core cable in surface / recessed medium class PVCconduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm HRFRLS-LR PVC insulated copper conductor single core cable etc. as required. (Polycab,havells make or as approved by Engineer in Charge) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 164 | a) Group A. |
| 165 | b) Group C. |
| 166 | Wiring for twin control light point with 1.5 sq.mm HR-FRLS-H-LF (HEAT RESISTANT FLAME RETARDANT LOW SMOKE HALOGEN - LEAD FREE) PVC insulated copper conductor single core cable in surface recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm HR-FRLS-H-LF PVC insulated copper conductor single core cable etc. as required (Polycab/Havells/Finolex for wires and Legrand/Hager/Siemens for switch make or equivalent or as approved by site engineer) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 167 | Group C. |
| 168 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm HR-FRLS-H-LF (HEAT RESISTANT FLAME RETARDANT LOW SMOKE HALOGEN - LEAD FREE) PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, and earthing the point with 1.5 sq. mm HRFRLS-LR PVC insulated copper conductor single core cable etc as required. (Polycab/Havells/Finolex for wires make or equivalent or as approved by site engineer) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 169 | Group A |
| 170 | Group C |
| 171 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections (Legrand,Havells,Bajaj make or as approved by Engineer in Charge) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 172 | S.P. 5/ 6 Amps one way Modular switch. |
| 173 | 5 pin, 5/ 6 Amps Modular socket outlet. |
| 174 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 175 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 176 | Supplying and drawing following sizes of HRFRLS-LF PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 177 | 1 x 1.5 sq. mm |
| 178 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of HRFRLS-LF PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (Polycab,havells make or as approved by Engineer in Charge) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 179 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 180 | 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 181 | Supplying and fixing 6 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required (Legrand,havells make or as approved by Engineer in Charge) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 182 | Single pole |
| 183 | Double pole 32Amp |
| 184 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc (Usha,Bajaj,Havells make or as approved by Engineer in Charge) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 185 | Exhaust Fan, Light duty, 300 mm sweep |
| 186 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required (Legrand/Schneider/L&T make or equivalent or as approved by site engineer) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 187 | 40 Amps. Cat-A |
| 188 | Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 189 | 20 mm dia. ISI marked, PVC conduit |
| 190 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Legrand/Schneider/L&T make or equivalent or as approved by site engineer) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 191 | Double door-12 way |
| 192 | Earthing including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 193 | G.I. earth plate 600 mm X 600 mm X 6 mm thick |
| 194 | Copper earth plate 600 mm X 600 mm X 3 mm thick |
| 195 | Providing and fixing 8 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessedconduit/ submain wiring/ cable as required including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 196 | Supplying and fixing two module stepped type fan regulator Legrand make Cat no. 6792 40 Fan Regulator 100W 360 Degree 2M White on the existing modular plate switch box including connections etc. as required. (Legrand/Schneider/Siemens make or equivalent or as approved by Engineer in charge ) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 197 | Providing and fixing of HARROW PLUS AL Panasonic make Cat no. PBTM17228, 22W, 5700K Tub, LED batten for surface and suspended applications. Aluminium housing, high transmissibility diffuser with high lumen output, complete with all accessories including connections, testing and commissioning as required (Panasonic/Philips/Wipro make or equivalent or as approved by Engineer in charge ) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 198 | Providing and fixing of Surface mounted TRUSS ADV Panasonic make Cat No. PBTM05404, 40W, 4000K IP65 Batten with inbuilt heat sink, polycarbonate housing equipped with anti-glare diffuser & energy efficient electronices driver complete with all accessories including connections, testing and commissioning as required (Panasonic/Philips/Wipro make or equivalent or as approved by Engineer in charge) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 199 | Providing and fixing following type of Recess Fixture Wipro make Mollis LD06, Cat No. LD06-151-XXX-57-XX, Warm White, 12Watt complete with all accessories, connections, testing and commissioning etc. as required. (Wipro/Philips/Havells make or equivalent or as approved by Engineer in charge ) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 200 | Supplying and fixing of Foot Light/Step Light including making connections, testing etc. (Philips/Jaquar/Wipro make or equivalent or as approved by Engineer in charge) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 201 | Philips make Andromeda LED Steplight, Model No. 31435, IP65, Colour: Anthracite Grey, Material : Aluminium, 3Watts, Lumen/CCT: 50-lm/3000K outdoor applications |
| 202 | Providing, installing, testing and commissioning of ceiling fan and regulator, including wiring, the down road of standard length (upto 30 Cm.) with 1.5 Sq.mm. PVC insulated copper conductor single core cable with BLDC Motor etc (Atomberg/Kuhl/CromptonGreaves/Usha make or equivalent or as approved by Engineer in charge ) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 203 | Atomberg make Renesa Ceiling Fan 600MM sweep |
| 204 | Providing and installation of stationary storage type Electric water Geyser by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18\\" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. (Jaquar/Racold/Havells make or equivalent or as approved by Engineer in charge ) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 205 | ERICA VERTICAL Cat No. ERM-WHT-V006 Jaquar make 6 Liter capacity instant water heater 5 Star |
| 206 | VERSA MANUAL HORIZONTAL Cat No. VRM-WHT-HD035 Jaquar make 35 Liter capacity water heater Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender