Tender For Special Repairs To Bldg No M-46 (Mns Mess) Of Mh Pal Ur And Provn Of Toilet Block With Attached Bathroom And Allied Services Of 639 Eme Bn At Pal Ur Mil Stn
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Aug 2026
12 days left
EMD
71400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Bldg No M-46 (Mns Mess) Of Mh Pal Ur And Provn Of Toilet Block With Attached Bathroom And Allied Services Of 639 Eme Bn At Pal Ur Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete all as specified and directed. |
| 3 | Taking down door shutters of any desc exc 1 Sqm but n.exc 2 Sqm each complete all as specified and directed. |
| 4 | Taking down cement plaster of any description on brick or stone or cement concrete block walls etc including raking out joints, hacking for key, scrubbing down with water etc, and removal of rubbish off the premises and leave the work clear of any plastering complete all as specified and directed. |
| 5 | M&L rendering 15mm thick plaster on brick masonry/ stone masonry or other than fair faces of brick wall in cement mortar 1:6 finished even and fair without using extra cement, complete all as specified and directed. Note: WPC compound may be used as per required ground condition which is to be measured and paid seperately. |
| 6 | M&L rendering 15mm thick plaster on brick masonry/ stone masonry or other than fair faces of brick wall in cement mortar 1:4 finished even and fair without using extra cement, complete all as specified and directed. |
| 7 | M&L preparing new plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper over 2mm waiicare putty complete all as specified and directed. |
| 8 | M&L preparing old plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper over 2mm waiicare putty complete all as specified and directed. |
| 9 | Material & Labour for appplying two or more coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 :2004, Alkali & fungal resistance dirt resistance exterior paint of required shade ( Company Depot Tinted ) with silicon additives @ 1.43 litre/10qm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces of wall complete including preparation of surfaces of walls complete all as specified and directed. |
| 10 | Material & Labour for appplying two or more coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 :2004, Alkali & fungal resistance dirt resistance exterior paint of required shade ( Company Depot Tinted ) with silicon additives @ 1.43 litre/10qm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces of wall complete including preparation of surfaces of walls by complete removal of existing treatment complete all as specified and directed. |
| 11 | Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed. |
| 12 | Walling of random rubble, uncoursed as in well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed. |
| 13 | M&L brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6 complete all as specified and directed. |
| 14 | S&F for 4mm thick E-board (Classic) false ceiling of size 610mm x 610mm fixed with GI snap grid frame work of same size as GI tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick GI tee as cross runner and GI angle of size 25x25x1.25 mm at the perimeter, including 4mm GI adjustable suspender of required length, including dismantling of old ceiling boards, complete all as specified and directed. |
| 15 | Dismantling old u/s wooden roof truss of any description. complete all as specified and directed. |
| 16 | Dismantling timber scantlings 40 sqcm and over in section in any position framed or unframed work etc, complete all as specified and directed. |
| 17 | Dismantling timber scantlings like fillets,rails, posts,rafters,purlins,etc under 40Sq.cm in section, in any position complete all as specified and directed. |
| 18 | Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and paving's not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified and directed. |
| 19 | M&L 75 mm thick PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate laid in alternative bays area not exc 2 sqm each as in plinth protection laid to slope of 1 in 12 including finishing the surface even and smooth with using extra cement complete all as specified and directed. |
| 20 | M&L for laying Chequered cement concrete tiles 20cm x20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floorswith grey cement and pigment over 20mm screed bed in CM 1:6 complete allas specified and directed. |
| 21 | M&L for 75 mm thick PCC 1:3:6, type C-2 (Using 40 mm graded crushed stone aggregate) as in sub base etc and finished even without using extra cement, complete all as specified and directed. |
| 22 | M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.6 sqm but not exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles incl Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 23 | M&L vitrified Ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed or bedding layer in CM 1:4. incl Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 24 | M&L Vitrified Ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 10 mm thick backing coat in CM 1:4. incl Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 25 | M&L Glazed ceramic any shade tiles in vertical surfaace 350mm x 250mm x 7mm/450mm x 350mm x 7mm/450x300x7mm/ 600x300x 7mm thick set and jointed in neat cement slurry, pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick backing coat in CM 1:4 to receive tiles, incl Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 26 | M & L for granite (of any size) tile 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over 20mm thick screed bed of CM 1:6 including cutting and polishing complete all as specified and directed. |
| 27 | S&F pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer,complete all as specified and directed. |
| 28 | S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer,complete all as specified and directed. |
| 29 | S&F 35mm thick factory made 2nd class hard wood plain framed, panelled shutter (one or two) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part 1) kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 30 | S&F 30 mm thickFlush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 31 | S&F 35mm thick factory made 2nd class hard wood glazed and skeleton shutter open rebated prepared to receive glass gauge etc without sash bars for securing glass , gauge etc size of members of shutters as specified in SSR Part- I section 8 clause 8.24(a) all as specified and directed. |
| 32 | S&F galvanised steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 33 | S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications complete all as specified and directed. |
| 34 | S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed. |
| 35 | S&F in repairs 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 36 | S&F in repairs 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 37 | S&F in repairs 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 38 | S&F in repairs 300 mm size (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp and staple ,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 39 | S&F in repairs 300mm long mild steel ordinary helical door springs including roller and roller plate complete all as specified and directed. |
| 40 | M&L preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide,zinc chrome primer complete all as specified and directed. |
| 41 | M&L preparation of old steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide,zinc chrome primer complete all as specified and directed. |
| 42 | M&L preparation of new wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 43 | M&L preparation of old wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 44 | S & F Rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe-290(Gde-E-165). complete all as specified and directed. |
| 45 | M&L plain cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate cast in situ in back fill of chowkhats and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified and directed. |
| 46 | M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate cast in situ in lintels up to 1.5 m clear span, cills steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones (fixing hold fasts), bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified and directed. |
| 47 | M&L TMT bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia, complete all as spfd and directed. |
| 48 | M&L TMT bars bars 6 to 8mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for column, hooking end and binding with and incl mild steel wire (annealed) not less than 0.9mm dia, complete all as spfd and directed. |
| 49 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 50 | S&F in repairs 18/19mm thick prelaminated particle board/ MDF board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 51 | M&L 6mm thick external teak wood lipping to block board or veneered particle board 18/19mm thick fixed with nails complete as specified and directed. |
| 52 | S&F in repairs 75 mm size, hasp and staple safety type aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 53 | S&F in repairs mild steel continuous piano hinges, bright finish or electro galvanised, width of flap when open 40mm, complete all as specified and directed. |
| 54 | S & F in repairs rotational moulded polyethylene water storage tank white in colour 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position with PVC float ball valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including dismantling old cemented/ asbestos water/ PVC storage tank, complete all as specified and directed. |
| 55 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Seat and cover for pedestal pan complete all as specified and directed. |
| 56 | S&F as in repair CP jet spray hygenic spray jet for 15mm bore dia fittings 1 to 1.5m long tube acrylic type complete all as specified and directed/ |
| 57 | S&F in repairs 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15mm dia 450mm long PVC connection with CP brass coupling nuts and PVC washer at both ends, complete all as specified and directed. |
| 58 | S&F in repairs vitreous china, white, flat back wash hand basin of size 550 mm x 400 mm including brass CP waste coupling 32 mm dia with long screwed shank and fly nuts, PVC, medium grade 32 mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15 mm dia, 450 mm long with brass CP nuts and washers at both ends complete all as specified and directed. |
| 59 | S&F 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6 Kgf/sq.cm for low level cistern and waste pipe for sink, washbasin complete all as specified and directed. |
| 60 | S&F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified and directed. |
| 61 | S&F in repairs, fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed. |
| 62 | S&F in repairs stop valve/angle valve, cast copper alloy, fancy type,chromium plated, screwed down, high pressure, with quater turn flange, screwed both ends for 15 mm bore iron pipe or for union complete all as specified and directed. |
| 63 | S&F in repairs PVC connection 15mm size, 600 mm long with PTMT nuts complete all as specified and directed. |
| 64 | S&F in repairs 32/ 40mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 65 | Dismantling of 100 / 110 mm bore dia cast iron/reinforced concrete/PVC drain pipes, jointed in cement mortar/lead joint/Adhesive and taking out of trenches, taking out from walls incl clamps, if required complete all as specified and directed. |
| 66 | Dismantling of 75mm bore dia cast iron/reinforced concrete/PVC drain pipes, jointed in cement mortar/lead joint/Adhesive and taking out of trenches, taking out from walls incl clamps, if required complete all as specified and directed. |
| 67 | S&F in repair PVC SWR pipe 110mm bore single socketed, in any length with rubber ring joints, fixed to walls including fixing clamps etc complete all as specified and directed |
| 68 | S&F in repair PVC SWR pipe 110mm bore single socketed, in any length with rubber ring joints, as in floors, trenches complete all as specified and directed |
| 69 | S&F in repair PVC SWR pipe 75mm bore single socketed, in any length with rubber ring joints, fixed to walls including fixing clamps etc complete all as specified and directed |
| 70 | S&F in repair PVC SWR pipe 75mm bore single socketed, in any length with rubber ring joints, as in floors, trenches complete all as specified and directed |
| 71 | S&F in repairs PVC (SWR) junction single TEE equal or unequal 110mm bore with access door complete all as specified and directed |
| 72 | S&F in repairs PVC (SWR) junction single TEE equal or unequal 75mm bore with access door complete all as specified and directed |
| 73 | S&F in repair PVC (SWR) floor trap plain with grating including jointing with solvent 75mm bore complete all as specified and directed. |
| 74 | S&F in repairs PVC (SWR) bends with access door of any radius 75mm bore dia complete all as specified and directed. |
| 75 | S&F in repairs PVC (SWR) bends with access door of any radius 100/ 110mm bore dia complete all as specified and directed. |
| 76 | S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC plain building board or commercial ply wood and fixed to wooden plug with chromium plated brass screw and cup washers complete all as specified and directed. |
| 77 | S&F in repairs stainless steel soap dish approximate size 160mm x 160mm x 90mm fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 78 | S&F in repairs,Towel Rail 600mm long 20mm dia, D type brass chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified & directed. |
| 79 | S & F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in pipe. complete all as specified and directed. |
| 80 | S&F sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 81 | S&F Stainless steel plate rack of size 600mmx750 mm of selected quality complete all as specified and directed. |
| 82 | S&F Brass chromium plated Sink mixture for mixing hot and cold water for sink, screwed down for iron pipe for 15mm dia bore pipe., complete all as specified and directed. |
| 83 | S&F in repair chromium plated central hole basin mixer for WHB single lever without popup waste system with 450 mm long braided hoses complete all as specified and directed. |
| 84 | Taking up or down 15 mm bore steel tubing and connection, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 85 | Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 86 | S&F in repairs steel water tubing, 15 mm bore, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work if required etc, complete all as specified and directed. |
| 87 | S&F in repairs steel water tubing, 20 mm bore, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work if required etc, complete all as specified and directed. |
| 88 | S&F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 290 (Gde-E-165) complete all as specified and directed. |
| 89 | S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.grade St.-240 complete all as specified and directed. |
| 90 | Dismantling of old rusted plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering etc. complete all as specified and directed. |
| 91 | Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 92 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 93 | S&F in repairs anodised aluminium frame/chowkhat for doors, windows, ventilators with minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 94 | S&F Powder coated Anodised aluminium door shutters ( power coating of any colour and thickness not less than 50 micron) aluminium section weighting 0.55kg/m incliding necessary joining cleats, glazing clips, rubber neoprane packing two number of alumium handle 150mm long for each shutter, one aluminium door stopper, hinges type B-21,100mm long,anodised aluminium snap beading,screws,anodised aluminium fittings complete all as specified and directed. |
| 95 | S&F Powder coated Anodised aluminium window and ventilator shutters ( power coating of any colour and thickness not less than 50 micron) side hung type without sash bars, aluminium section weighting 0.55kg/m incliding necessary joining cleats, glazing clips, rubber neoprane packing one number of alumium handle of suitable size for each shutter, one peg stays 150mm long, 02 numbers hinges type B-21,100mm long,anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and directed. |
| 96 | Taking down and refixing the same aluminium door shutter after resecuring/ readjusted to aluminium section weighing not less than 0.55 kg/m including necssary joining cleats,glazing clips,ruber neoprene packing, handle 2 Nos in Each door, hinges, anodised aluminium snap bidding, screw etc. and renew unserviceable items such as fittings, sections, glass, Solid PVC sheets etc complete all as specified and directed. |
| 97 | Hacking out old broken glass from wood or steel frame or frames of any description complete all as specified and directed. |
| 98 | S&F in repairs 4 mm thick sheet glass ordinary quality, exceeding 0.50 square metre in each pane fixed in wood or steel frames with aluminium powder coated snap beading etc. complete all as specified and directed. |
| 99 | S&F in repairs 3 mm thick transparent fibre glass ordinary quality as in glazing not.exc 0.50 sqm each pane fixed in wood or steel frames with oil putty or wooden beads or self tapping screw complete all as specified and directed. |
| 100 | S&F in repairs 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 101 | S&F in repairs brass 4 Levers mortice lock, vertical type of size 100mm, complete all as specified and directed. |
| 102 | S&F in repairs aluminium (extruded section body) door closer hydraulically regulated, designation No. 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed. |
| 103 | Removal of excavated material (soil) to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed. |
| 104 | PVC coated mild steel conduit pipe 25mm bore (Drapery rod) with a pair of PVC coated MS clamps to hold drapary rod and decorative attachment at one or both ends of drapary rod, fixed to opening of door / windows, (Each opening n.exc. 1.50 mtr, contained with a pair of clamps and a pair of side ornamental attachments), complete all as specified and directed. |
| 105 | S&F in repairs Door seal (Snake guard) with Aluminium frame powder coated up to 900 to 1000mm door opening complete all as specified and directed. |
| 106 | S&F in repair glass self assembly consisting of 5.5 mm thick glass sheet glass self 12 Cm wide with CP bracket gaurd and railing 60 Cm long complete all as specified and directed. |
| 107 | S&F 32 mm pvc waste pipe to WHB, sink etc. complete all as specified and directed. |
| 108 | Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed. |
| 109 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed. |
| 110 | PCC 1:4:8(nominal mix) type D-2 (using 40 mm graded crushed stone aggregate), as in foundation filling and mass concrete, complete all as specified and directed. |
| 111 | RCC M-25 (using 20mm graded stone aggretate) design mix for Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc.complete all as specified and directed. |
| 112 | Use and waste of formwork to sides of concrete foundation,footing,bases of columns,rafts and rafts beams and similar work,vertical or to batter for fair finished surfaces of concrete complete all as specified and directed. |
| 113 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams flat for fair finished surfaces of concrete , complete all as specified and directed. |
| 114 | RCC M-25 design mix (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span all as specified. |
| 115 | RCC M-25 (using 20mm graded stone aggretate) design mix in columns ,pillars,piers,post and struts ,all as specified and directed. |
| 116 | Use and waste of formwork to sides of pillars, posts, struts, columns etc for rough finished surface of concrete,complete all as specified and directed. |
| 117 | M & L TMT bars 5mm dia and over upto and including 10mm dia as in stirrups cut to length bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with and incl mild steel wiere (annealed) not less than 0.9 mm dia or securing with clips.complete all as specified and directed. |
| 118 | M&L for Brickwork with old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built incm (1:4) complete all as specified and directed. |
| 119 | Material & labour for Rendering 10 mm thick CM 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed. |
| 120 | M & L for Rendering 15 mm thick in two coats i.e. 10 mm thick in CM 1:6 and 5 mm thick in CM 1:4 using water proofing liquid compound as per manufacturer's instructions on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement complete all as specified and directed. Note: - Water proofing liquid compound shall be measured and paid separately. |
| 121 | Supply only liquid water proofing liquid complete all as specified and directed. |
| 122 | Preparation of new surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. |
| 123 | S&F Mild steel bolts,purpose made dia n exc 12 mm, with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 30 cm long, complete all as specifies and directed. |
| 124 | M&L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area.complete all as specified and directed. |
| 125 | M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)complete all as specified and directed. |
| 126 | M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed. |
| 127 | M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 128 | M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed. |
| 129 | M & L for hard core broken stone of gauge n exc 63 mm deposited , spread and levelled in layers n exc 15 cm thick, watered rammed to a true surface complete all as specified and directed. |
| 130 | M&L 75 mm thick cement concrete 1:4:8 type C-2 (using 40mm graded agg) as in Sub base all as specified and directed |
| 131 | M&L for 25 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in floor finished even and rought to received the topping layer complete all as specified and directed |
| 132 | M & L for providing 75mm thick PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in plinth protection including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and directed. |
| 133 | M&L for Non skid ceramic whites tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 134 | M&L for white coloured Glazed ceramic tiles in to match the shade of floor tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 135 | S&F for 110mm bore PVC (SWR) bends any radius fitting fo PVC (SWR) pipes, complete all as specified and directed. |
| 136 | S & F 110 mm PVC (SWR) vent cowl ,complete all as specified and directed. |
| 137 | M&L 75mm PVC Bends (any radius) complete all as specified and directed. |
| 138 | S&F factory made solid PVC moulded door shutter with wood free EPS 28 to30mm thick(stiles) with 24 or 6 panels design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face supplying and fixing in frame at site asper specifications and drawings as per SSR Pt-II 2010 |
| 139 | S&F 125mm size, extruded aluminium alloy handles, fabricated type, anodised.complete all as specified and directed. |
| 140 | S&F steel windows with side hung shutters including projecting typy hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded, double leaf doors including painting with one shop coat of zinc chromate primer, complete all as specified and directed. |
| 141 | S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc. 0.50 Sqm in each pane complete all as specified and directed. |
| 142 | M&L for RCC Nominal mix 1:2:4 type B1(using 20 mm graded aggregate) in chajjas complete all as specified and directed. |
| 143 | Formwork to flat chullah hoods,chajjas,troughs and similar items including edges fair finished surfaces,complete all as specified and directed. |
| 144 | S & F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe 290 (Gde E-165) complete all as specified and directed. |
| 145 | S&F 20mm dia gun metal ,globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 146 | S&F Vitreous China wash down water closet pan and trap, (pedestal pattern) (Fixing includes bolts, 'P' and 'S' trap and connecting to drain pipe, white seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, flushing cistern and also polyethelene flushing pipe) etc complete all as specified and complete all as specified and directed. |
| 147 | Supply of PVC 10 Ltr valveless,syphonic action type , flushing cistern, low level,white inlet, ball valve, float and handle including bracket and & supply of flush pipe of polyethylene of low or high density or PVC ,32 mm dia for low level cistern & supply of plastic water closet seat cover white , closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device.complete all as specified and directed. (Note:- Fixing of these items includes in above item) |
| 148 | S&F, Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand of size 630x450 mm ,including brackets and waste pipe complete all as specified and directed. |
| 149 | S&F vitreous china Urinal half stall type white with spreader etc, complete including making good, complete all as specified and directed. |
| 150 | S&F 15mm bore Angle valves, CP fancy type (ISI marked) one way/ two way screwed down, high pressure with crutch or butterfly handle, screwed both ends (externally threaded) complete all as specified and directed. |
| 151 | PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed. |
| 152 | S&F Liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats, (Minimum weight 105 gms) complete all as specified and as directed. |
| 153 | S&F to walls with chromium plated brass screw, white Toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 154 | S&F Rotational moulded polyethylene water storage tank 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position with PVC float ball valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line . Complete all as specified and directed |
| 155 | Returning filling in with approved excavated earth, incl spreading leveling, watering and well ramming in layers n exc 25 cm thick with any type of soil complete all as specified and directed |
| 156 | M&L for cement concrete bed to drain pipes of thickness 100 mm and width 450 mm incl packing under and haunching against the sides of 150 mm bore drain pipes after they are laid and tested in cement concrete type D-2 ,1:4:8 (using 20mm graded aggregates) complete all as specified and directed. |
| 157 | S&F, for 150 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 158 | Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonry in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2 M dia X 3.0 M effective depth complete all as specified and directed. |
| 159 | Excavation over areas n exc 1.5m depth and getting out in any type of soil,complete all as specified and directed. |
| 160 | Excavation over areas exc 1.5m but n exc 3.0m depth and getting out in any type of soil, complete all as specified and directed. |
| 161 | M&L for hardcore of gauge n exc 63 mm ,deposited ,spread and levelled in layers ,watered and rammed to a true surface complete all as specified and directed. |
| 162 | PCC 1:2:4 type B2 using 40mm graded stone aggregate as in flooring of septic tank, complete all as specified and directed. |
| 163 | M/L for PCC 1:3:6 type C1 using 20mm graded crushed stone aggregates in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth course, string courses, lacing courses, parapets and railing upto 60 cm in height ,coping and the like including weathering ,slightly rounded or chemfered angles and throating complete all as specified and directed. |
| 164 | M&L for 100 mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregates complete all as spd and directed |
| 165 | M&L for old size Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:4 , complete all as specified and directed. |
| 166 | M&L for 20 mm thick rendering in CM 1:3 on fair faces of brickwork or concrete surfaces. complete all as specified and directed. |
| 167 | M&L for pre cast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregates) as in landing cover slab etc including necessary formwork set in cement mortar 1:4 complete all as specified and directed. |
| 168 | S&F tube medium grade galvanised with all fitting laid in trenches , of 25mm dia complete all as specified and directed. |
| 169 | S&F tube medium grade galvanised with all fitting laid in trenches , of 40 mm dia complete all as specified and directed. |
| 170 | S&F 25 mm bore gun metal, globe or gate valve, heavy duty confirming to IS -778 with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 171 | S&F 40 mm bore gun metal, globe or gate valve, heavy duty confirming to IS -778 with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 172 | M&L construction of valve pit of inner sizes up to 60 cmx 60cm x 60cm brick masonry construction complete All internal surface and external surface upto 15 cm below normal ground level of brick masonry shall be plastered 15mm thick in cement mortar 1:4, finish even and smooth including necessary excavation and earth work in any type of soil,metal sheet cover with proper angle iron frame and PCC work all as per TD drg complete all as specified and directed. |
| 173 | Excavation in trenches not exceeding 1.5 m width and not exceeding 1.5 m depth and getting out for laying of pipe/cable etc in any type of soil complete all as specified and directed. |
| 174 | Taking down old unsv copper/aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 175 | Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed. |
| 176 | Taking down un-serviceable sub main wiring of any type and any size from wall, ceiling etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
| 177 | Taking down un-serviceable sub main wiring of any type and any size from wall, ceiling etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender