Tender For Repairs And Polishing/Painting Of Various Typrs Of Wooden Furniture Under Ge Brichgunj, Sri Vijaya Puram
Tender Value
39.71 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
18 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs And Polishing/Painting Of Various Typrs Of Wooden Furniture Under Ge Brichgunj, Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Table Dining 6 person (FD-273 , FD/MAP-II/03) |
| 2 | Taking out old unserviceable top and Supply & fixing new top of size 1500 mmx900mm X 760MM of 18/19mm thick pre-laminated MDF board both side teak colour ,exterior grade,duly covered with 6mm thick teak wood beading allround complete all as shown on drg and as directed .Make - Novapan/Century/Greenply/ Action Tessa |
| 3 | Taking out old unserviceable legs and Supply & Fixing new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size complete all as specified on drg and as directed. |
| 4 | All as per item ser No. 1.02 above but long rail of table dining |
| 5 | All as per item ser No. 1.02 above but short rail of table dining |
| 6 | Provision of Konia (wooden Bracket) of size 3\\"x3\\" seasoned teak wood 1\\" thick in between leg and side rail of the table fixed with screw to provide more strength complete all as specified and as directed. |
| 7 | Taking down old unserviceable hard pvc ring and Supply & Fixing new hard pvc ring of each leg with fixied 2mm screw of table dining complete all as specified and as directed . |
| 8 | Material and labour for Preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing required gloss to match with the exisiting complete all as shown on drawing or as directed by the Engineer-in-Charge. |
| 9 | TABLE CENTRE (FD-274 & 29M) |
| 10 | Taking out old unserviceable top and Supply & fixing new top of size 900mmx450mm thick pre-laminated MDF board both side teak colour ,exterior grade,duly covered with 6mm thick teak wood beading alround complete all as specified and as shown on drg and as directed .Make - Novapan/Century/Greenply/Action Tessa |
| 11 | Taking out old unserviceable legs and Supply & fixing new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size complete all as specified on drg and as directed. |
| 12 | All as per item No. 2.02 above but long rail of table center |
| 13 | All as per item No. 2.02 above but short rail of table center |
| 14 | All as per item No. 2.02 above but stiffiner of table center |
| 15 | Provision of Konia (wooden Bracket) of Table Centre size 3\\"x3\\" seasoned teak wood 1\\" thick in between leg and side rail of the table fixed with screw to provide more strength complete all as specified and as directed. |
| 16 | Taking down old unserviceable hard pvc ring of table centre of each leg and with fixied 2mm screw of table centre dining |
| 17 | Material and labour preparation of old wood surfaces of table centre by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing under item No 2.02 to 2.06 required gioss to match with the exisiting complete all as shown on drawing or as directed by the Engineer-in-Charge. |
| 18 | TABLE PEG (FD-277, 236 & FD-384) |
| 19 | Taking out old unserviceable top and Supply & fixing new top of size 450x300mm thick pre-laminated MDF board both side teak colour ,exterior grade,duly covered with 6mm thick teak wood beading alround complete all as specified and as shown on drg and as directed. Make - Novapan/Century/Greenply/Action Tessa |
| 20 | Taking out old unserviceable legs and Supply & Fixing new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size complete all as specified on drg and as directed. |
| 21 | All as per item No. 3.02 above but long rail of table peg |
| 22 | All as per item No. 3.02 above but short rail of table peg |
| 23 | All as per item No. 3.02 above but side stiffiner of table peg |
| 24 | Provision of Konia (wooden Bracket) of size 3\\"x3\\" seasoned teak wood 1\\" thick in between leg and side rail of the table fixed with screw to provide more strength complete all as specified and as directed. |
| 25 | Taking down old unserviceable hard pvc ring and S/F new hard pvc ring of each leg with fixied 2mm screw of table dining. |
| 26 | Material and labour for preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing required gloss to match with the exisiting complete all as shown on drawing and as directed by the Engineer-in-Charge. |
| 27 | TABLE WRITING (FD-275 FD-33M) |
| 28 | Taking out old unserviceable top and Supply & fixing new top of size 1145 x 600mm thick pre-laminated MDF board both side teak colour ,exterior grade,duly covered with 6mm thick teak wood beading alround complete all as specified and as shown on drg and as directed .Make - Novapan/Century/Greenply/Action Tessa |
| 29 | Taking out old unserviceable legs and Supply & fixing new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size complete all as specified on drg and as directed. |
| 30 | All as per item No. 4.02 but center stiffiner of table writing |
| 31 | All as per item No. 4.02 but side stiffiner of table writing |
| 32 | All as per item No. 4.02 but top rail long of table writing |
| 33 | All as per item No. 4.01 but shutter of existing size as shown on drawing |
| 34 | Taking down old unserviceable drawer of front and back side and Supply & fixing new drawer of front and back side of 18mm thick pre-laminated MDF board as per required size complete all as shown on drawing and as directed. |
| 35 | All as per item No.4.07 above but side drawer of 12mm thick existing size as shown on drawing. |
| 36 | All as per item No.4.06 above but bottom of drawer of 6mm thick commercial ply BWR grade. |
| 37 | Taking down old unserviceable hard pvc ring and Supply & fixing new hard pvc ring of each leg with fixied 2mm screw of table dining complete all as specified and as directed. |
| 38 | Taking down old unserviceable knob and supply & fixing new decorative knob 40mm dia shape and size complete all as specified on drg and as directed . |
| 39 | Material and labour for preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing and required gloss to match with the exisiting complete all as shown on drawing and as directed by the Engineer-in-Charge. |
| 40 | Table 900 x 900 x760mm (FD-231, FD-284 & FD-291) |
| 41 | Taking out old unserviceable top and Supply & fixing new top of size 900x900x760mm thick pre-laminated MDF board both side teak colour ,exterior grade,duly covered with 6mm thick teak wood beading alround complete all as shown on drg and as directed .Make - Novapan/Century/Greenply/Action Tessa |
| 42 | Taking out old unserviceable legs and Supply & fixing new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size complete all as specified on drg and as directed. |
| 43 | All as per item No. 5.02 but bottom rail of table 900 x 900x 760 mm complete all as specified and as directed. |
| 44 | Provision of Konia (wooden Bracket) of size 3\\"x3\\" seasoned teak wood 1\\" thick in between leg and side rail of the table fixed with screw to provide more strength complete all as specified and as directed. |
| 45 | Taking down old unserviceable hard pvc ring and Supply & fixing new hard pvc ring of each leg with fixied 2mm screw of table dining complete all as specified and as directed . |
| 46 | Material and labour for preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing and required gloss to match with the exisiting complete all as shown on drawing and as directed by the Engineer-in-Charge. |
| 47 | TABLE DRESSING LADIES WITH MIRROR (FD-251, FD 378 & FD-32) |
| 48 | Taking out existing old unserviceable foggi fadded looking mirror size 1200x380mm x 5mm thick with frame and Supply & fixing new looking mirror of same size and shape make : ATUL/MODI Guard duly framed with 1st class seasoned teak wood and back of mirror shall be completed all as specified on drg and as directed. |
| 49 | Removal of brocken glass panel and new glass pane of size 5mm thick duly slotted glass for sliding purpose compelete all as specified on drg and as directed. |
| 50 | Taking down old unserviceable legs and Supply & fixing new leg of 1st class seasoned teak wood free from knots and cracks with permissible moisture contains as per shape and size compelete all as specified on drawing and as directed. |
| 51 | Taking down old unserviceable drawers and supply & fixing new drawer of front, side and back of 18mm thick pre laminated MDF board extirior grade both side teak colour with including 4mm thick teak wood beading of all around of drawer and smooth functioning of drawer size and shape as exists complete all as specified on drg and as directed. |
| 52 | All as per item No 6.04 but bottom of drawer 6mm thick commericial ply BWR grade as per required size complete all as shown on drg and as directed. |
| 53 | All as per item No, 6.04 above but exiting table top of table dressing ladies complete all as specified and as directed. |
| 54 | All as per item No, 6.04 above but bottom of table dressing ladies complete all as specified and as directed . |
| 55 | All as per item ser No, 6.04 above but sides of table dressing ladies complete all as specified and as directed. |
| 56 | Taking down of old unserviceable bottom frame and supply & fixing new frame with legs of 1st class seasoned teak wood free from knots and cracks with permissible moisture contains as per shape and size compelete all as specified on drawing and as directed. |
| 57 | Taking down old unserviceable knob and supply & fixing new decorative knob 40mm dia shape and size complete all as specified on drg and as directed. |
| 58 | Material and labour for preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing and required gloss to match with the exisiting complete all as shown on drawing and as directed by the Engineer-in-Charge. . |
| 59 | Table Dressing Gents (FD-379 & FD-230) |
| 60 | Replecement of existing unservicable drawer for table dressing gents and supply & fixing new drawer made out of prelaminted MDF Board exterior grade 12mm thick both side teak colour and 4mm teak wood beading around all as shown on drg and as directed. |
| 61 | S&F in Repairs new mirror 5mm thick of size 380x76mm with full frame all as shown on drg and as directed. |
| 62 | S&F in Repairs new top of size 900x300mm made out of 18mm thick prelaminated MDF Board exterior grade of approved size and shape is shown on drg complete all as specified and as directed. |
| 63 | All as per item No. 7.03 but bottom of table dressing Gents complete all as specified and as directed. |
| 64 | Taking down old unserviceable knob and supply & fixing new decorative knob 40mm dia shape and size complete all as specified on drg and as directed. |
| 65 | Material and labour for preparation of old wood surface by scraping and filling bore holes with putty and finally rubbing with sand paper abrasive colth thoroughly for smooth and clean surace and applying two coats french polish over a coat of wax to the depressed surace for smooth finishing complete all as shown on drawing and as directed by the Engineer-in-Charge. |
| 66 | Table Bed Side MAP ( FD/E6/MAP/15) |
| 67 | Taking out old unserviceable top and Supply & fixing new top of size 450x450mm thick pre-laminated MDF board both side teak colour ,exterior grade,duly covered with 6mm thick teak wood beading alround complete all as specified on drg and as directed .Make - Novapan/Century/Greenply/Action Tessa |
| 68 | All as per item ser No 8.01 above but sides of table bed side complete all as specified and as directed. |
| 69 | All as per item ser No 8.01 above but bottom of table bed side complete all as specified and as directed. |
| 70 | Removing of existing old unserviceable Back of Table Bed Side MAP and providing new Back of size 460mm x 440mm with 6mm plywood commercial fixed with headless nail, rest all as shown on drg and as directed by the Engr-in-Charge. Make - Century Ply/ Greenply/ Kitply |
| 71 | All as per item ser No 8.04 above but pull out try of table bed side complete all as specified and as directed. |
| 72 | All as per item No. 8.04 above but side drawer of table bed side complete all as specified and as directed. |
| 73 | All as per item No. 8.04 above but front drawer of table bed side complete all as specified and as directed. |
| 74 | All as per item No. 8.04 above but bottom drawer of table bed side complete all as specified and as directed. |
| 75 | Taking down old unserviceable handle and supply and fixing new CP handle 75mm long shape and size complete all as specified and as shownon drg. |
| 76 | Table Dining 1200x900mm (FD/MAP-II/03) |
| 77 | Taking out old unserviceable top and Supply & fixing new top of size 1200x900mmthick pre-laminated MDF board both side teak colour ,exterior grade,duly covered with 6mm thick teak wood beading alround complete all as specified on drg and as directed .Make - Novapan/Century/Greenply/Action Tessa |
| 78 | Taking out old unserviceable legs and Supply & fixing new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size complete all as specified on drg and as directed. |
| 79 | All as per item No. 9.02 above but short rail of table 1200x900mm complete all as specified and as directed. |
| 80 | All as per item No. 9.02 above but long rail of table 1200x900mm complete all as specified and as directed. |
| 81 | Provision of Konia (wooden Bracket) of size 3\\"x3\\" seasoned teak wood 1\\" thick in between leg and side rail of the table fixed with screw to provide more strength complete all as specified and as directed. |
| 82 | Taking down old unserviceable hard pvc ring and Supply & fixing new hard pvc ring of each leg with fixied 2mm screw of table dining complete all as specified and as directed . |
| 83 | Material and labour for preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing and required gloss to match with the exisiting complete all as shown on drawing and as directed by the Engineer-in-Charge. |
| 84 | TABLE WITH DRAWER 900x 600 x 760mm (FD-224 & 283) |
| 85 | Taking out old unserviceable top and Supply & fixing new top of size 900x600mm thick pre-laminated MDF board both side teak colour ,exterior grade,duly covered with 6mm thick teak wood beading alround complete all as specified on drg and as directed .Make - Novapan/Century/Greenply/Action Tessa |
| 86 | Taking out old unserviceable legs and Supply & fixing new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size complete all as specified on drg. |
| 87 | All as per item No. 10.02 above but short rail of table 900x600mm complete all as specified and as directed . |
| 88 | All as per item No. 10.02 above but long rail of table 900x600mm complete all as specified and as directed . |
| 89 | All as per item No. 10.02 above but side stiffiner of table 900x600mm complete all as specified and as directed . |
| 90 | All as per item No. 10.02 above but centre stiffiner of table 900x600mm complete all as specified and as directed . |
| 91 | S&F in repairs to old unserviceable damaged drawers of size 300mm x 30mm x 18mm for table with drawer made out of pre-laminated MDF Board both side teak colour with including providing 6mm thick commercial ply to bottom of drawer complete, rest all as shown on drg and as directed. |
| 92 | Taking down old unserviceable hard pvc ring and Supply & fixing new hard pvc ring of each leg with fixied 2mm screw of table dining complete all as specified and as directed . |
| 93 | Material and labour preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing and required gloss to match with the exisiting complete all as shown on drawing and as directed by the Engineer-in-Charge. |
| 94 | TEA POY (FD-278 & FD-382) |
| 95 | Taking out old unserviceable top and Supply & fixing new top of size 600mm x450mm thick pre-laminated MDF board both side teak colour ,exterior grade,duly covered with 6mm thick teak wood beading alround complete all as specified on drg and as directed .Make - Novapan/Century/Greenply/Action Tessa. |
| 96 | Taking out old unserviceable legs and Supply & fixing new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size complete all as specified on drg and as directed. |
| 97 | All as per item No. 11.02 above but long rail of teapoy complete all as specified and as directed . |
| 98 | All as item No. 11.02 above but short rail of teapoy complete all as specified and as directed . |
| 99 | Provision of Konia (wooden Bracket) of size 3\\"x3\\" seasoned teak wood 1\\" thick in between leg and side rail of the table fixed with screw to provide more strength complete all as specified and as directed. |
| 100 | Taking down old unserviceable hard pvc ring and Supply & fixing new hard pvc ring of each leg with fixied 2mm screw of table dining complete all as specified and as directed . |
| 101 | Material and labour for preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing and required gloss to match with the exisiting complete all as shown on drawing and as directed by the Engineer-in-Charge. |
| 102 | Side Doard (FD-241 & FD-1112) |
| 103 | Taking down unserviceable legs and Supply & fixing new legs of size 50x50x75mm made of 1st class Hard woood (Teak) well seasoned free from knots and cracks with permissible moisture through out shape and size duly French polished to match existing surface complete all as specified on drg and as directed. |
| 104 | All as item No 12.01 above but bottom frame of size 1060x 290x 25x 45mm. |
| 105 | Taking down old unserviceable drawers and supply & fixing new drawer of front, side and back of 18mm thick pre laminated MDF board extirior grade both side teak colour with including 4mm thick teak wood beading of all around of drawer and smooth functioning of drawer size and shape as exists complete all as specified and as shown on drg. |
| 106 | All as per item No 12.03 but bottom of drawer 6mm thick commericial ply BWR grade complete all as specified and as directed . |
| 107 | All as per item ser No. 12.03 but partition of side board complete all as specified and as directed . |
| 108 | All as per item ser No. 12.03 but top or bottom complete all as specified and as directed . |
| 109 | All as per item No.12 .03 but shelf of side board complete all as specified and as directed . |
| 110 | All as per item ser No. 12.03 but front shutter of side board complete all as specified and as directed . |
| 111 | Taking down old unserviceable back ply and supply & fixing new back ply 6mm thick commericial BWR grade, IS-303 grade complete all as specified on drg and as directed. |
| 112 | Taking down old unserviceable CP handle and supply & fixing new CP handle shape and size complete all as specified on drg and as directed. |
| 113 | Preparation of surface with sand paper after scrubbing and French polishing to side board, with and including to the parts repaired/ replaced and required gloss, to match with the existing complete all as shown on drg and as directed. |
| 114 | STOOL DRESSING Cushioned (FD/E6/MAP/14) |
| 115 | Taking out old unserviceable legs and supply & fixing new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size complete all as specified on drg and as directed. |
| 116 | Same as item No. 13.01 but long rail of stool dressing complete all as specified and as directed . |
| 117 | Same as item No. 13.01 but short rail of stool dressing complete all as specified and as directed . |
| 118 | Same as item No. 13.01 but centre stiffner of stool dressing complete all as specified and as directed. |
| 119 | Same as item No. 13.01 but side stiffner of stool dressing complete all as specified and as directed . |
| 120 | Replacement of existing unserviceable cushion of Stool Dressing and new foam cushion of size 40 density 75mm thick duly covered with tapestrycloth/ raxine and bottom side 12mm thick plywood including with stitching, rest all as shown on drg and as directed by the Engr-in-Charge.Note :- (i) Each cushion for seat will be measured as single unit. (ii) The tapestry cloth raxine shall be mat finish and rate of tapestry cloth shall not less than Rs. 450/- per Sqm and as approved by GE. Make:-Sleepweel/ Kurlon of approved make |
| 121 | Material and labour preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing and required gloss to match with the exisiting complete all as shown on drawing or as directed by the Engineer-in-Charge. |
| 122 | Bin linen Multi purpose (FD/E6/MAP/09) |
| 123 | Taking down of unserviceable bottom frame and supply & fixing new bottom frame with of 1st class seasoned teak wood free from knots and cracks with permissible moisture contains as per shape and size compelete all as specified on drawing and as directed. |
| 124 | Taking out old unserviceable drawers and supply & fixing new drawers made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size complete all as specified on drg and as directed. |
| 125 | All as per item No 14.02 but bottom of drawer 6mm thick commericial ply BWR grade complete all as specified and as directed . |
| 126 | All as per item ser No. 14.02 but partition of Bin linen multi purpose complete all as specified and as directed . |
| 127 | All as per item ser No. 14.02 but top or bottom of Bin linen multi purpose complete all as specified and as directed . |
| 128 | All as per item No.14.02 but shelf of Bin linen multi purpose complete all as specified and as directed . |
| 129 | All as per item ser No. 14.02 but front shutter of Bin linen multi purpose complete all as specified and as directed . |
| 130 | All as per item ser No. 14.02 but back ply of Bin linen multi purpose complete all as specified and as directed . |
| 131 | All as per item ser No. 14.02 but CP handle of Bin linen multi purpose complete all as specified and as directed . |
| 132 | Material and labour preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing and required gloss to match with the exisiting complete all as shown on drawing or and directed by the Engineer-in-Charge. |
| 133 | CHAIR DINING (MAP) JCO/ORS (FD/E6/MAP/05) |
| 134 | Opening of joints and removing of old front leg and supply & fixing new front leg (left/right) made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size duly french polished new and old surface of chair complete all as specified in drawing and as directed. |
| 135 | All as per item ser No 15.01 but rear legs complete all as specified and as directed . |
| 136 | All as per item ser No 15.01 but stiffener complete all as specified and as directed . |
| 137 | All asper item ser No 15.01 but side rail complete all as specified and as directed . |
| 138 | Same as item No 15.01 but back support complete all as specified and as directed . |
| 139 | Provn of stiffiner (teak wood ) of size 25mm x25mm and 35 mm long seasoned teak wood between side rail of the chair fixed with screw to provide more strenghth. of PVC seat complete all as specified and as directed . |
| 140 | Provision of Konia (wooden Bracket) of size 3\\"x3\\" seasoned teak wood 1\\" thick in between leg and side rail of the chair fixed with screw to provide more strength complete all as specified and as directed. |
| 141 | Taking out unservicable PVC seat of chair dining and supply & fixing new PVC seat 5mm thick white/cream colour fix of chair bottom complete all as specified and as directed. |
| 142 | Preparation of surface with grinder and sand paper after scrubbing and French polishing to chair dining and including to the parts repaired/replaced and the required gloss to match with the existing complete all as shown on drg and as directed. |
| 143 | Chair Writing (FD-280) |
| 144 | Opening of joints and removing of old unservicable front leg and supply & fixing new front leg (left/right) made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size duly french polished new and old surface of chair complete all as specified on drawing and as directed. |
| 145 | All as per item ser No 16.01 but rear legs of chair writing complete all as specified and as directed. |
| 146 | All as per item ser No 16.01 but stiffener of chair writing complete all as specified and as directed. |
| 147 | All asper item ser No 16.01 but side rail of chair writing complete all as specified and as directed. |
| 148 | All as per item ser No 16.01 but back support of chair writing complete all as specified and as directed. |
| 149 | All as per item ser No. 16.01 but handle of chair writing complete all as specified and as directed. |
| 150 | Provision of Konia (wooden Bracket) of size 3\\"x3\\" seasoned teak wood 1\\" thick in between leg and side rail of the chair fixed with screw to provide more strength complete all as specified and as directed. |
| 151 | Taking out unserviceable caning and supply & fixing new recanning of chair writing of 2mm wide oval shape of cane white colour and godrej pattern boarder side 4mm wide cane all as per specified on drg and as directed. |
| 152 | Preparation of surface with grinder and sand paper after scrubbing and French polishing to chair dining and including to the parts repaired/replaced and the required gloss to match with the existing complete all as shown on drg and as directed. |
| 153 | Chair Easy (FD-229) |
| 154 | Opening of joints and removing of old unserviceable front leg and supply & fixing new front leg (left/right) made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size duly french polished new and old surface of chair complete all as specified on drawing and as directed. |
| 155 | All as per item ser No 17.01 but rear legs of chair easy complete all as specified and as directed. |
| 156 | All as per item ser No 17.01 but stiffener of chair easy complete all as specified and as directed. |
| 157 | All asper item ser No 17.01 but side rail of chair easy complete all as specified and as directed. |
| 158 | Same as item No 17.01 but back support of chair easy complete all as specified and as directed. |
| 159 | Provision of Konia (wooden Bracket) of size 3\\"x3\\" seasoned teak wood 1\\" thick in between leg and side rail of the chair fixed with screw to provide more strength complete all as specified and as directed. |
| 160 | Taking out unserviceable caning and supply & fixing new recanning of chair writing of 2mm wide oval shape of cane white colour and godrej pattern board side 4mm wide cane complete all as per specified on drg and as directed. |
| 161 | Preparation of surface with grinder and sand paper after scrubbing and French polishing to chair dining and including to the parts repaired/replaced and the required gloss to match with the existing complete all as shown on drg and as directed. |
| 162 | Chair Dining (FD-279) |
| 163 | Opening of joints and removing of old unserviceable front leg and supply & fixing new front leg (left/right) made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size duly french polished new and old surface of chair complete all as specified on drawing and as directed. |
| 164 | All as per item ser No 18.01 but rear legs of chair Dining complete all as specified and as directed. |
| 165 | All as per item ser No 18.01 but stiffener of chair Dining complete all as specified and as directed. |
| 166 | All as per item ser No 18.01 but side rail of chair Dining complete all as specified and as directed. |
| 167 | Same as item No 18.01 but back support of chair Dining complete all as specified and as directed. |
| 168 | Provision of Konia (wooden Bracket) of size 3\\"x3\\" seasoned teak wood 1\\" thick in between leg and side rail of the chair fixed with screw to provide more strength complete all as specified and as directed.. |
| 169 | Taking out unserviceable caning and supply & fixing new recanning of chair writing of 2mm wide oval shape of cane white colour and godrej pattern board side 4mm wide cane complete all as per specified on drg and as directed. |
| 170 | Preparation of surface with grinder and sand paper after scrubbing and French polishing to chair dining and including to the parts repaired/replaced the required gloss to match with the existing complete all as shown on drg and as directed. |
| 171 | Bed ply top (FD-246) |
| 172 | Taking out unservicable plytop and supply & fixing new 12 mm thick BWR plywood grade A of size 900X1800MM ISI Marked as confirmed to IS 303 in single place as per drawing without any joint to the bed frame with suitable stainless steel screws with cup whasher including removal of damaged plywood complete all as shown on drg and as directed by the Eng-in-charge. Make of ply - Greenply/Centuryply/Kitply |
| 173 | Taking out old unservicable long rail and supply & fixing new long rail 1st class teak wood as per existing size 1800mm x 85mm x 25mm of bed ply top including removal of damaged long rail all as shown on drg and as directed. |
| 174 | All as per item No. 19.02 but short rail of bed ply top complete all as specified and as directed. |
| 175 | All as per item No 19.02 but stiffiner of bed ply top complete all as specified and as directed. |
| 176 | All as per item No 19.02 but leg of bed ply top complete all as specified and as directed. |
| 177 | S&F in Repairs to 4mm tick OST ply wood commercial of size 780 x180mm including 12mm dia half round teak wood beading of both side of foot board including removal of damaged ply complete all as shown on drawing and as directed. |
| 178 | S&F in Repairs to 4mm tick OST ply wood commercial of size 780 x340mm including 12mm dia half round teak wood beading of both side of foot board including removal of damaged ply all as shown on drawing and as directed. |
| 179 | S&F in Repairs to flat iron of mild steel of size 35mm x5mm ,150 long cleat bent to right angle on each coners of bed all as shown on drawing and as directed. |
| 180 | Material and labour for preparation of lod wood surface by scraping and filling bore holes with putty and finally rubbing with sand paper abrasive colth thoroughly for smooth and clean surace and applying two coats french polish over a coat of wax to the depressed surace for smooth finishing complete all as shown on drawing and as directed by the Engineer-in-Charge. |
| 181 | Hat Stand With Mirror (FD-233, FD-361) |
| 182 | Taking out old unservicable mirror and supply & fixing new mirror 5mm thick for hat stand with mirror of approved make with complete frame back all as shown on drg and as directed. Make of Mirror- Sanit gobin/ Modigrard/ Atul |
| 183 | Taking out old undervicable back ply and supply & fixing new back ply 6mm commercial of size 710mm with mirror fixed with headless nail complete all as shown on drg and as directed. |
| 184 | S&F in Repairs brass pegs with brass screw in place of lost/damaged pegs in hat stand with mirror rest complete all as shown on drg and as directed. |
| 185 | Material and labour for preparation of old wood surface by scraping and filling bore holes with putty and finally rubbing with sand paper abrasive colth thoroughly for smooth and clean surace and applying two coats french polish over a coat of wax to the depressed surace for smooth finishing complete all as shown on drawing or as directed by the Engineer-in-Charge. |
| 186 | Chair Dining Offers MAP (FD/E6/MAP/10 & FD/E6/MAP-II/04) |
| 187 | Opening of joints and removing of old unservicable front leg and supply & fixing new front leg (left/right) made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size duly french polished new and old surface of chair complete all as specified on drawing and as directed. |
| 188 | All as per item ser No 21.01 but rear legs complete all as specified and as directed. |
| 189 | All as per item ser No 21.01 but stiffener complete all as specified and as directed. |
| 190 | All a sper item ser No 21.01 but side rail complete all as specified and as directed. |
| 191 | All a sper item ser No 21.0 but back support complete all as specified and as directed. |
| 192 | Provision of Konia (wooden Bracket) of size 3\\"x3\\" seasoned teak wood 1\\" thick in between leg and side rail of the chair fixed with screw to provide more strength complete all as specified and as directed. |
| 193 | Replacement of existing unservicable cushion of chair dining and new foam cushion of size 40 density 75mm thick duly covered with tapestrycloth/ raxine and bottom side 12mm thick plywood including with stitching, rest all as shown on drg and as directed by the Engr-in-Charge.Note :- (i) Each cushion for seat will be measured as single unit. (ii) The tapestry cloth raxine shall be mat finish and rate of tapestry cloth shall not less than Rs. 450/- per Sqm and as approved by GE. Make:-Sleepweel/ Kurlon of approved make |
| 194 | Preparation of surface with grinder and sand paper after scrubbing and French polishing to chair dining and including to the parts repaired/replaced and the required gloss to match with the existing complete all as shown on drg and as directed. |
| 195 | SOFA SET 4/5 PERSON WITH CUSHION (FD-281 & FD-373) |
| 196 | Replacement of existing old unservicable cushion of Sofa Set with new foam cushion of size 40 density 100mm thick duly covered with tapestry cloth including mulmul cloth and stitching, rest all as shown on drg and as directed by the Engr-in-Charge.Note :- (i) Each cushion for seat or back will be measured as single unit. (ii) The tapestry cloth shall be mat finish and rate of tapestry cloth shall not less than Rs. 450/- per Sqm and as approved by GE. Make:-Sleepweel/ Kurlon of approved make |
| 197 | Removing the existing old unserviceable front leg from Sofa and providing new first class teak wood leg of size 70mm x 35 mm x 530mm, rest all as shown on drg and as directed by the Engr-in-Charge. |
| 198 | Removing the existing old unserviceable rear leg from Sofa and providing new first class teak wood leg of size 70mm x 35 mm x 530mm, rest all as shown on drg and as directed by the Engr-in-Charge. |
| 199 | Removing existing old unserviceable Armrest from Sofa and providing new first class teak wood Arm Rest of size 35mm x 70mm x 725mm, rest all as shown on drg and as directed by the Engr-in-Charge. |
| 200 | Removing existing old unserviceable side rail from Sofa and providing new first class teak wood side rail of size 35 mm x 100mm x 725mm, rest all as shown on drg and as directed by the Engr-in-Charge. |
| 201 | Removing existing old unserviceable bearers from Sofa and providing new first class teak wood bearers of size 40mm x 40mm x 725mm, rest all as shown on drg and as directed by the Engr-in-Charge. |
| 202 | Removing existing old unserviceable battens from Sofa and providing new first class teak wood battens of size 50mm x 20 mm, rest all as shown on drg and as directed by the Engr-in-Charge. |
| 203 | Removing existing old unserviceable front rail from Sofa three seater and providing new first class teak wood front rail of size 35mmx 100mm x 1590 mm, rest all as shown on drg and as directed by the Engr-in-Charge. |
| 204 | Removing existing old unserviceable front rail from Sofa single seater and providing new first class teak wood front rail of size 35mm x 10mm x 530 mm, rest all as shown on drg and as directed by the Engr-in-Charge. |
| 205 | Material and labour preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing complete all as shown on drawing and as directed by the Engineer-in-Charge. |
| 206 | SOFA SET 4/5 PERSON WITH CUSHION (TP) |
| 207 | Replacement of exisiting old unserviceable foam cushion of Sofa set with new foam cushion of size 40 density 100mm thick duly covered with tapestry/raxien with stitching, rest all as shown on drg and as directed by Engr-in-Charge.Note :- (i) Each foam cushion for seat or back will be measured as single unit. |
| 208 | Removing the existing old unseviceable front leg from Sofa and providing replacement new leg complete all as specified and as directed by the Engr-in-Charge |
| 209 | Removing the existing old unservicable rear leg from Sofa and providing replacement rear leg complete all as specified and as directed by the Engr-in-Chage |
| 210 | Trolley for TV (FD/E6/MAP/04) |
| 211 | Taking out old unserviceable sides of Trolley for TV and supply & fixing of new sides of 18mm prelaminated particle board, ISI marked, both side teak wood colour complete all as specified on drawing and as directed by Engr-in-charge. |
| 212 | All as per 24.01 above but 5.5mm openable glass shutter witch magenatic catcher complete all as specified and as directed. |
| 213 | All as per 24.01 above but bottom of trolley for TV complete all as specified and as directed. |
| 214 | All as per 24.01 above but top of trolley for TV complete all as specified and as directed. |
| 215 | All as per 24.01 above but back of trolley for TV complete all as specified and as directed. |
| 216 | Taking down unserviceable heavy duty revolving wheels and supply & fixing of new 50mm heavy duty revolving wheels as per specification mentiond in drawings of Trolley for TV complete all as specified and as directed. |
| 217 | Dressing Table Ladies including stool (FD/E6/MAP/07) |
| 218 | Taking out existing old unserviceable foggi fadded looking mirror size 1200x380mm x 5mm thick with frame and supply & fixing new looking mirror of same size and shape make : ATUL/MODI Guard duly framed with 1st class seasoned teak wood and back of mirror shall be completed and all as spceified and shown on drg and as directed. |
| 219 | Taking down old unserviceable drawers and supply & fixing new drawer of front, side and back of 18mm thick pre laminated MDF board extirior grade both side teak colour with including 4mm thick teak wood beading of all around of drawer and smooth functioning of drawer size and shape as exists complete all as specified and as shown on drg and as directed. |
| 220 | Taking down old unserviceable drawers and supply & fixing new drawer of front, side and back of 18mm thick pre laminated MDF board extirior grade both side teak colour with including 4mm thick teak wood beading of all around of drawer and smooth functioning of drawer size and shape as exists complete all as shown on drg and as directed. |
| 221 | All as per item No, 25.03 above but bottom of table dressing ladies complete all as specified and as directed. |
| 222 | All as per item ser No, 25.03 above but sides of table dressing ladies complete all as specified and as directed. |
| 223 | Taking down old unserviceable knob and supply & fixing new decorative knob 40mm dia shape and size complete all as specified on drg and as directed . |
| 224 | Taking Out Existing unserviceable glass panes and supply & fixing of new 03 Nos of 5.5mm glass shelves supported on runners/ Glass holders complete all as specified and as directed. |
| 225 | Replacement of existing unserviceable cushion of Stool Dressing and new foam cushion of size 40 density 75mm thick duly covered with tapestrycloth/ raxine and bottom side 12mm thick plywood including with stitching, rest all as shown on drg and as directed by the Engr-in-Charge.Note :- (i) Each cushion for seat will be measured as single unit. (ii) The tapestry cloth raxine shall be mat finish and rate of tapestry cloth shall not less than Rs. 450/- per Sqm and as approved by GE. Make:-Sleepweel/ Kurlon of approved make |
| 226 | Taking out existing old unserviceable wheels and supply & fixing of new 50mm dia heavy duly revolving nylon wheels in stool dressing complete all as specified and as directed. |
| 227 | Material and labour preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing and required gloss to match with the exisiting complete all as shown on drawing or as directed by the Engineer-in-Charge. |
| 228 | Mirror Dressing Gents (FD/E6/MAP/16) |
| 229 | Taking out existing old unserviceable foggi fadded looking mirror and Supply & fixing new looking mirror 5.5mm thick of size 750x600mm with full frame complete all as shown on drg and as directed. |
| 230 | Taking Out Existing unserviceable glass panes and supply & fixing of new 03 Nos of 5.5mm glass shelves supported on runners/ Glass holders complete all as specified and as directed. |
| 231 | Taking out old unserviceable legs and Supply & fixing new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size complete all as specified on drg and as directed. |
| 232 | All as per item No 26.03 but frame of size 50 x 28mm of Mirror Dressing Gents complete all as specified and as directed. |
| 233 | Taking out unserviceable ply wood of back side of Mirror and Supply & fixing of new commercial ply of 12mm size 750 x 600mm complete all as specified and as directed. |
| 234 | Taking out unserviceable Box and Supply & fixing on new box of size 750x600mm made out of 18mm prelaminated particle Board for Mirror Dressing Gents complete all as specified and as directed. |
| 235 | Taking Out unserviceable Hings and Supply & fixing of new Hinges of 75mm in Mirror Dressing Gents complete all as specified and as directed. |
| 236 | Material and labour preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing and required gloss to match with the exisiting complete all as shown on drawing or as directed by the Engineer-in-Charge. |
| 237 | Material and labour preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing complete all as shown on drawing and as directed by the Engineer-in-Charge. for the following furniture articles:- |
| 238 | Bed Ply wood top[FD-246/ 247] |
| 239 | Book Case [FD-237] |
| 240 | Peg Table [FD-236,FD-277 & FD-384) |
| 241 | Side Board [FD-241,FD-1112] |
| 242 | Stool Dressing [FD-282] |
| 243 | Table dressing Ladies with mirror [FD-251] |
| 244 | Table dressing Gents with mirror [FD-230] |
| 245 | Table dining 6/8 persons [FD-273] |
| 246 | Teapoy [FD-278,382] |
| 247 | Table centre [FD-274 / 235] |
| 248 | Table writing [FD-33,275] |
| 249 | Chair Easy [FD-229 |
| 250 | Chair Writing [FD-280 |
| 251 | Chair Dining [FD-279] |
| 252 | Hat stand with mirror [FD-233, FD-361) |
| 253 | Sofa set 5 seater [FD-281,373] |
| 254 | Sofa set 4 seater [FD-281,373] |
| 255 | Table 3'X2' without drawer [FD-231,284] |
| 256 | Table Dining 1200x900mm |
| 257 | Table 3'X2' with drawer [FD-224,283] |
| 258 | Table 900mmX900mmX760mm [FD-88,291] Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender