Tender For special Repair Wk To 10X Or Md Accn Of No 2 Trg Bn Beg & Centre Roorkee
Tender Value
79.21 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
10 days left
EMD
1.43 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Haridwar → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Wk To 10X Or Md Accn Of No 2 Trg Bn Beg & Centre Roorkee
BOQ
| Sl. No. | Item Description |
| 1 | M&L for mild steel TMT bars of 10 mm dia and over cut to length bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 2 | M&L for providing reinforced cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in kitchen slab, complete all as specified and directed. |
| 3 | M&L for providing reinforced cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in Chajjas complete all as specified and directed. |
| 4 | Use & waste form work to sides and soffits of shelves etc including supports such as kitchen shelves, platforms and similar works rough finish surface of concrete flat surface (the thickness of slab/shelves n.exc. 200 mm) complete all as specified and directed. |
| 5 | Use & waste form work to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed |
| 6 | Demolition of brick work built in cement mortar in any description and position complete all as specified and directed. |
| 7 | M&L for brick work using kiln burnt sub class 'B' old size bricks, straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified and directed |
| 8 | M&L for brick work using kiln burnt sub class 'B' old size bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:6 complete all as specified and directed. |
| 9 | Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) including removal of rubbish out side complex (MOD land), complete all as specified and directed. |
| 10 | M&L for cement concrete 1:2:4 type B0(using 12.5mm graded crushed stone agg) as in roof leveling, finished even and fair, complete all as specified and directed |
| 11 | M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone agg). Plinth protection laid to a slope of 1 in 24 in alternate basis system. Each bay shall not exceed 3m in length. 12mm wide & 75mm deep joint shall be formed between the bays which shall be filled with mastic filling to full depth comprising a mixture of 1 part of hot blow bitumen 85/25 portion and two parts of heated badrapur sand (by volume) etc complete all as specified and directed. |
| 12 | M&L for PCC (1:2:4) Ty B-0 using 12.5mm thick course aggregate as in cills, steps, parapets,, copings, and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 13 | Dismantling of RCC/ PVC water tanks exc 250 liters and n.exc 500 liters capacity of any condition or type complete all as specified and directed. |
| 14 | S&F white colour Rotational moulded polyethylene water storage tank 500 liters capacity, white triple layer construction (cylindrical vertical closed top), hoisted & fixed in position including all fittings complete all as specified and as directed. |
| 15 | S&F in repair Gun-metal globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron complete all as specified and directed. |
| 16 | S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) complete all as specified and directed. |
| 17 | Dismantling and breaking up drain pipes any dia not Exc 150mm (Salt glazed ware, Cast Iron pipe/ RCC drain pipe/PVC pipe, AC)set in cement mortar. |
| 18 | S&F PVC (SWR) pipes of 75 mm nominal outside diameter (Type B with wall thickness 3.20 to 3.80 mm) single socketed in any length with rubber ring joints including all fittings/fixtures fixed on wall or in trenches or in floor complete all as specified and directed. |
| 19 | S&F PVC (SWR) 75mm dia (single T) or unequal provided with access door complete all as specified and directed. |
| 20 | S&F in repair PVC (SWR) floor trap, 75mm dia plain including jointing with solvent cement with grating including jointing to waste pipe in cement concrete complete all as specified and directed. |
| 21 | S&F in repair PVC branch piece single (equal or unequal) 75 mm bore ordinary or inverted (spigot or socket type) or with parallel branches incl access door complete all as specified and directed |
| 22 | S& F PVC (SWR) vent cowl suitable for 75 mm pipe complete all as specified and directed. |
| 23 | S&F PVC (SWR) 75mm dia (Double T) or unequal provided with access door complete all as specified and directed. |
| 24 | S&F 75 mm bore PVC (SWR) bends/shoes any radius complete all as specified and directed |
| 25 | S&F in repair 75 mm pipe stack clamps out of 50mmx 5 mm flat iron including bolts and nuts and securing ends of stays to walls or roof complete all as specified and directed. |
| 26 | S&F PVC (SWR) pipes of 110 mm nominal outside diameter (Type B with wall thickness 3.20 to 3.80 mm) single socketed in any length with rubber ring joints including all fittings/fixtures fixed on wall or in trenches or in floor complete all as specified and directed. |
| 27 | S&F PVC (SWR) junction, 110mm dia (double T) or unequal provided with access door complete all as specified and directed. |
| 28 | S&F 110 mm bore PVC (SWR) bends/shoes any radius complete all as specified and directed |
| 29 | S&F in repair PVC branch piece single (equal or unequal) 110 mm bore ordinary or inverted (spigot or socket type) or with parallel branches incl access door a complete all as specified and directed |
| 30 | S&F PVC (SWR) junction, 110mm dia (Single T) or unequal provided with access door complete all as specified and directed. |
| 31 | S&F PVC (SWR) reducers 110mm dia, complete all as specified and directed. |
| 32 | S&F in repair 110 mm pipe stack clamps out of 50mmx 5 mm flat iron including bolts and nuts and securing ends of stays to walls or roof complete all as specified and directed. |
| 33 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) laid bedded and pointed in any mortar and removal of old tiles from premises complete all as specified and directed. |
| 34 | M&L for non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 35 | M&L for cloured glazed ceramic tiles 450x350 x 7 to 8mm thick, as in vertical surfaces of wall such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement over and including 10mm thick rendering in CM 1:4 complete all as specified. |
| 36 | S&F Vitrified tiles 8 to10 mm thick (square/ rectangular light shade) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 37 | All as per item No 36 above but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. Please Enable Macros to View BoQ information |
| 38 | All as per item No 36 above but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender