Tender For H13559 Of 26-27 Providing Modification Of Lift No 3 In Main Building At Sir J.J.Group Of Hospitals Compound At Byculla, Mumbai.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Jul 2026
5 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for H13559 Of 26-27 Providing Modification Of Lift No 3 In Main Building At Sir J.J.Group Of Hospitals Compound At Byculla, Mumbai.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and erecting cabin fan of A.C 230V, 50 cycles 400mm sweep complete with necessary brackets for fixing cabin fans, wire, etc. |
| 2 | Overhauling of the Gearbox by opening the gear box, cleaning the oil path with oil adjusting and inspecting the thrust bearing & bush with packings etc. Refilling it with fresh oil of requisite viscosity and sufficient quantity, alignment of end to end play, re - fitting & testing. |
| 3 | Provding dismantling the existing worn-out/damaged thrust bearing & bush with allied accessories. Supplying & installing new Thrust bearing & Bush with allied accessories like packings etc. Refilling it with fresh oil of requisite viscosity and sufficient quantity, complete suitable upto 10 passenger lift car wirth re-erection as original with necessary alignment & testing. |
| 4 | Providing dismantling the existing lift duty electric motor from lift gearbox coupling to carryout necessary repairs and re-erection the same as original with necessary alignment & testing complete after repairing. |
| 5 | Providing rewinding of the electromagnetic type brake coil suitable to operate on 110V DC supply by superior quality enamelled copper wire of require size complete with testing. |
| 6 | Providing and fixing new set brake liner of good quality complete with alignment & testing with removal of old worn-out brake liners. |
| 7 | Providing dismantling the existing OSG pulley set (top & bottom) complete and providing and fixing overspeed governor pulley set ( top & bottom) made from superior quality cast iron completely finished suitable for Lift car rated speed. |
| 8 | Providing dismantling the existing lift car/counter weight guide shoe liner and providing and fixing new superior quality non-metallic car/counter weight guide shoe Liner complete with re-erection, alignment & adjustment complete with lubrication |
| 9 | Providing dismantling the existing deteriorated lift car enclosure by supplying & erecting new enclosure made from 1.5mm thick stainless steel sheet SS304 grade of superior quality with necessary material complete with handrail, mirror, required thickness stainless steel chequered plate flooring and min. 2.5mm thick GI sheet car top & stainless steel 304grade 1.2mm thick false ceiling & required LED light fitting & cabin fan/blower, emergency light with necessary grill along with required accessories suitable for 4 to 8 passenger lift car |
| 10 | Supplying erecting & testing & commissioning minimum 2000mm high Infra-Red/IR curtain with minimum 80beams, suitable to attach automatic Lift car door complete with electronic driver suitable to work on 230V AC supply with required wiring & accessories complete connected to the lift controller safety circuit. including dismantling of existing accessories as applicable |
| 11 | Providing and fixing new magnetic reed switch with M.S. Flag for levelling the lift. Providing and fixing necessary magnet for the floor position indicator, providing and fixing electronics card with digital indicator, complete with re-erection including dismantling of existing accessories as applicable |
| 12 | Supplying & erecting main suspension wire rope of 13mm dia. having 8/19 construction as per IS complete with termination in provided eye bolts including dismantling of existing accessories as applicable. |
| 13 | Supplying & erecting main suspension wire rope of 8mm dia. having 8/19 construction as per IS complete with termination in provided eye bolts including dismantling of existing accessories as applicable. |
| 14 | Supplying & erecting COPO/TOPO car/landing door panels with frame made from 1.5mm thick SS 304grade sheet complete with necessary coupler arrangements, nylon bearings at hanger with header assembly with all required accessories with electromechanical lock & nylon coated guide shoes complete having adequate strength as per requirements with necessary alignment complete with greasing having clear opening of 700mm in width and clear height not less than 2000mm, including dismantling of existing door as applicable. |
| 15 | Supplying & erecting COPO/TOPO car/landing door panels with frame made from 1.5mm thick SS 304grade sheet complete with necessary coupler arrangements, nylon bearings at hanger with header assembly with all required accessories with electromechanical lock & nylon coated guide shoes complete having adequate strength as per requirements with necessary alignment complete with greasing having clear opening of 700mm in width and clear height not less than 2000mm, including dismantling of existing door as applicable. |
| 16 | Providing & fixing LOP with single push button with metallic top & Braille Coded suitable for UP/DN having luminous glow indicator around button with MS box & 3mm thick SS face plate with screws with UP & DN button & digital CPI (suitable for 1digits) complete with necessary connections, including dismantling of existing door as applicable |
| 17 | Providing & fixing LOP with two push button with metallic top & Braille coded suitable for UP/DN having luminous glow indicator around button with MS box & 3mm thick SS face plate with screws with UP & DN button & digital CPI (suitable for 2digits) complete with necessary connections, including dismantling of existing door as applicable |
| 18 | Providing & fixing COP with push buttons having luminous glow indicator around button suitable for G+7 floors with push buttons with metallic top & Braille coded suitable for door close, door open, alarm bell, stop, light, fan, intercom etc, FPI, with MS box & 3mm thick SS face Plate with UP & DN arrows & digital FPI (suitable for 2digits) complete with necessary connections, including dismantling of existing COP as applicable |
| 19 | Providing & fixing car door operator motor with assembly of suitable capacity & speed with necessary pulleys & required accessories complete including dismantling of existing accessories as applicable |
| 20 | Supplying erecting, testing & commissioning of electronic microprocessor/PLC based collective-selective lift controller with closed loop logic suitable up to 7.5kW capacity lift duty motor without VVVF Drive & lift car travelling Gr+7 floors having power operated doors complete erected on wall or floor made from 1.5mm thick CRCA sheet with powder coated enclosure having IP54 protection grade. including dismantling of existing accessories as applicable |
| 21 | Supplying erecting, testing & commissioning of VVVF drive having provision for closed loop logic with necessary card, suitable to drive lift duty electric motor up to 7.5kW capacity to be erected in position with necessary wiring in existing control panel including dismantling of existing accessories as applicable |
| 22 | Supplying erecting, testing & commissioning of VVVF drive having provision for closed loop logic suitable to drive lift door operator motor up to 0.5/0.75kW capacity to be erected in position with necessary wiring in existing control panel including dismantling of existing accessories as applicable |
| 23 | Supplying erecting, testing & commissioning of rotary encoder mounted on the lift motor shaft for correct & control the positioning & direction of the lift car & providing closed loop feedback to the lift controller complete with necessary shielded data cable up to controller with necessary connectors, this job includes 24595.00 Job 24595.00dismantling of existing encoder if any. |
| 24 | Providing & fixing inspection/maintenance box with cover of suitable size with UP/DN push buttons (with mechanical protection), stop button as per IS, mechanically protected, toggle switch for normal/inspection/maintenance mode, 6A/250V 3Pin socket & 6A piano type switch protected cover with bulb & switch having IP54 grade protection class, this job includes dismantling of existing Inspection / maintenance box if any. |
| 25 | Providing & fixing junction box having size of 300x300mm & height of 80mm complete with Bakelite terminal strip of 16A/500V rating with cover having IP54 grade protection class includes dismantling of existing Junction box if any. This job includes dismantling of existing inspection/maintenance box if any. |
| 26 | Supplying erecting, testing & commissioning of ARD panel having audio-visual indication in lift car complete with necessary SMF VRLA batteries suitable for up to 8 passenger capacity lift car including dismantling of existing accessories as applicable |
| 27 | Providing complete lift shaft wiring in copper wire/cable from main controller to car top with COP & to all landing push button panel to all landing gate locks to all floor levelling switch to main motor to brake unit & final limit switch indicator system using ISI mark single pvc insulated flexible copper wire having minimum1.0 sq. mm size from controller to safety devices & 0.75Sqmm size for indication system complete in PVC/GI trunking with cover for lift with manually/power operated doors travelling up to G+6 floors / 7 stops& 7 landings for floor height up to 4.2mtrs including dismantling of existing accessories as applicable |
| 28 | Supplying, erecting & terminating flat flexible PVC insulated cable 12core 1.0 sq. mm copper conductor used for trailing cables complete erected with pvc/wooden fastening arrangement & lugs, on wall/ trunking as per specification including dismantling of existing accessories as applicable |
| 29 | Supplying, erecting, testing & commissioning programmable rope mounted Overload Warning Device (OWD) within built digital indicator complete with required wiring & accessories with audio visual indication in lift car including dismantling of existing accessories as applicable. |
| 30 | PVC armoured / unarmoured cables and wires (Copper) |
| 31 | HG / MS/ GI Materials / Poles, etc. |
| 32 | Cabin fan. |
| 33 | Lift ropes / belts |
| 34 | All types of SS material Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender