Tender For Cremation Shed At Dhargian Mohalla, Ward No. 4 And Construction Of Cremation Shed At Pangail Nallah, Ward No. 1 Pyt Ladana, Block Kulwanta Rdd Pri 26-27
Tender Value
4.85 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
10 days left
EMD
9700
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udhampur → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Cremation Shed At Dhargian Mohalla, Ward No. 4 And Construction Of Cremation Shed At Pangail Nallah, Ward No. 1 Pyt Ladana, Block Kulwanta Rdd Pri 26-27
BOQ
| Sl. No. | Item Description |
| 1 | Earth Work in Excavation by manual labour in foundation trenches including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil. 1m from cutting edge.All kinds of soil. |
| 2 | Providing and laying in position cement concrete 1 cement:5fine sand:10 graded crushed stone aggregates 40mm size.excludingthe cost of centring and shuttering all work upto plinth Level |
| 3 | Providing and laying in position cement concrete 1 cement:3 fine sand:6 graded crushed stone aggregates 20mm size excluding the cost of centring and shuttering- all works upto plinth level. |
| 4 | Centring and shuttering including strutting, propping etc and removal of the formwork. Foundation,Footing,Base of Columns etc |
| 5 | Filling Of Boulders in between Plinth |
| 6 | Dry brick on edge flooring in required pattern with common burnt clay non-modular bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with fine sand |
| 7 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 8 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 9 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead,including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.12.1.5 0.50 mm thick with zinc coating not less than 275 gram/m² |
| 10 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 11 | Painting with synthetic enamel paint of approved brand and manufactur to give an even shade.Two or more coats on new work |
| 12 | Cement |
| 13 | Aggregates |
| 14 | Bricks |
| 15 | SIGN BOARD Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender