Tender For Construction Of Shed, Tile Work And Allied Work At Ward No.2, Village Pangala, Pyt Kclower, Block Nagrota Under Scheme Cdf For The Year 2026-27.
Tender Value
3.89 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
13 days left
EMD
7780
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Shed, Tile Work And Allied Work At Ward No.2, Village Pangala, Pyt Kclower, Block Nagrota Under Scheme Cdf For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc.(not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqmon plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting outexcavated earth and disposal of |
| 2 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with 1:5:10 (1 cement : 5coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 3 | Providing and laying in position specified grade of reinforced cement concrete including curingbut excluding the cost of centering, shuttering, finishing and reinforcement. All works uptoplinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 4 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in positionand binding all complete |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. inlayers not exceeding 20 cm in depth, consolidating each deposited layer by ramming andwatering, lead upto 50 m and lift upto 1.5 m. |
| 6 | Centering and shuttering including strutting, propping etc. and removal of formfor:Foundations, footings, bases of columns etc. |
| 7 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymercoated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or withG.I. limpet washers filled with white lead, including a coat of approved steel primer and twocoats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/verticalor curved surface)excluding the cost of purlins, rafters and trusses and including cutting to sizeand shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 8 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc.,including cutting , hoisting , fixing in position and applying a priming coat of approved steelprimer, including welding and bolted with special shaped washers etc. complete 10.16.1 Hotfinished welded type tubes |
| 9 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30grade made by block making machine with strong vibratory compaction and of approved sizeand design/shape laid in required colour and pattern over and including 50mm thick compactedbed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineerin-charge. |
| 10 | Carriage of material with in avg. Lead from source to site A) Sand avg 10km lead by MT |
| 11 | Carriage of material with in avg. Lead from source to site B) Agg avg 10 km lead by MT |
| 12 | Add cost of CIB |
| 13 | PROVISION FOR ELECTRIFICATION |
| 14 | PROVISION FOR SOLAR LIGHTS |
| 15 | Providing and Fixing Stainless Steel Rectangular Table of 304 grade Stainless Steel weldedconstruction fully assembled with round edges as per the Design approved by engineer in chargeincluding the cost of embedding the feet in concrete base after making necessary troughs. Theconcrete base shall be of mix (1:3:6), laid over leveling course of (1:5:10). The cost includes thecarriage of any and all materials required for the complete job. |
| 16 | Providing and Fixing Stainless Steel Benches of 304 grade Stainless Steel wleded constructionfully assembled with embeded type feet 3-seater capacity as per the Design approved by theEngineer-In-Charge including the cost of embeding the feet in concrete base after makingneccessary troughs. The concrete base shall be of mix (1:3:6), laid over leveling course of(1:5:10). The cost includes the carriage of any and all materials required for the complete Job. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender