Tender For Day To Day Complaints Of Internal Electric Supply & Various E/M Related Items In Nofra Area Under Ge (Nw) Nofra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Jul 2026
4 days left
EMD
95900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Complaints Of Internal Electric Supply & Various E/M Related Items In Nofra Area Under Ge (Nw) Nofra
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Jul-2026 | Days corrigendum | Other | 31-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Receiving complaints from JE incharge lodged by the user/occupants of electrification nature, rectification of the fault as per the compaint lodged by the user onward KWH meter in respect of main distribution board having switch board, fused, MCB distribution board in sheet metal enclosure, point wiring fixture for light/fan /bell /light or power sockets, metal clad plug socket complete repair to the extend by removing connections from the system, removing faults in (surface /concealed) wiring/ circuits, sunken boxes, Junction boxes, main switches, MCBs/DBs any type of utility light fittings, lamp holders, AC ceiling fan/exhaust fans and other connected fixtures of internal electrification including providing stores such as wires of appropriate size and conductor matching to existing one upto the light of 2 mtr, insulation tape, screws, nuts as per the site requirement to rectify the fault with regard to complaint lodged and refixing of fitting and fixture to their original position as dismentled complete all as directed at site to the entire satisfaction of Engineer -in- Charge. |
| 2 | Note : (i) Any copmplaint which is left out/unattendent 2 days by the electrician by any reasons the same to be communicated to the JE incharge /AGE E/M with reason. |
| 3 | (ii) New material/stores provided for completing the job shall be measured and paid for separetely under relevent items of sch 'A'. |
| 4 | (iii) Contractor shall provide the all type of T & P to each electrician for attending the internal electric complaints. |
| 5 | (iv) Contractor shall provide the complaint register and complaint slip serially numbered in duplicate as per sample. The rate of such items included in this items. |
| 6 | \\"(v) Any unattended complaints not done in specified time limit. The contractor shall penalty Rs. 200/- on each complaints per day. |
| 7 | (vi) Docket shall be taken from MES complait cell at every morning at 09.00 am bt rep of Contractor and submitted at Complaint cell on next morning at 08.45 am afeter satisfactorily completion on daily basis.\\" |
| 8 | Supply only switch piano type 5 Amps one way AC 230 Volts. |
| 9 | Supply only of bell push 5 Amps, AC 230 Volts. |
| 10 | Supply only switch socket combination outlet 3 pin 5 Amps flush type (Multi purpose) piano type AC 230 Volts. |
| 11 | Supply only switch/socket combination outlet 2 in 1, 3 pin 5 Amps and 15 Amp flush type (Multi purpose) piano type AC 230 Volts. |
| 12 | Supply only stepped type electronic fan regulator, flush type on the exiting phenolic laminated sheet etc. as reqd. |
| 13 | Supply only switch modular type 6 Amps one way AC 230 Volts. |
| 14 | Supply only switch modular type 16 Amps one way AC 230 Volts. |
| 15 | Supply only modular type bell push 6 Amps, AC 230 Volts. |
| 16 | Supply only modular type socket 6 Amps 2/3 pin combined, AC 230 Volts. |
| 17 | Supply only modular type socket 6/16 Amps 2/3 pin combined, AC 230 Volts. |
| 18 | Supply only modular type fan regulator, AC 230 Volts. |
| 19 | Supply only Modular white cover plate with Frame 1 Module. |
| 20 | Supply only Modular white cover plate with Frame 2 Module. |
| 21 | Supply only Modular white cover plate with Frame 3 Module. |
| 22 | Supply only Modular white cover plate with Frame 4 Module. |
| 23 | Supply only Modular white cover plate with Frame 6 Module. |
| 24 | Supply only Modular white cover plate with Frame 8 Module. |
| 25 | Supply only Modular white cover plate with Frame 12 Module. |
| 26 | Supply only Modular metal flush box 1 module. |
| 27 | Supply only Modular metal flush box 2 module. |
| 28 | Supply only Modular metal flush box 3 module. |
| 29 | Supply only Modular metal flush box 4 module. |
| 30 | Supply only Modular metal flush box 6 module. |
| 31 | Supply only Modular metal flush box 8 module. |
| 32 | Supply and fix in repair Modular metal flush box 12 module. |
| 33 | Supply only ceiling rose 65x50mm two to three terminal AC 230 volts complete all as specified. |
| 34 | Supply only bell, ding dong, AC, 230 volts, single phase. |
| 35 | Supply only lamp holder insulated body with back plate batten/angle type for batten fittings. |
| 36 | Supply only sheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP) |
| 37 | Supply only Building security light of 45 Watt LED streetlight fitting luminaire, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing, toughned glass cover with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08, complete all as specified and directed. |
| 38 | Supply only cable flexible PVC insulated twin core with copper conductor of size 23/0.0076 |
| 39 | Supply only plug top 3 pin 15 Amps AC 230 volts. |
| 40 | Supply only bakelite sheet not less than 3mm thick for mounting of switch sockets, fan regulators, etc. size 100x100mm or PVC rectangular Box of 100 mm x 100mm and 50 mm deep. |
| 41 | Supply only bakelite sheet not less than 3mm thick for mounting of switch sockets, fan regulators, etc. size 175x100mm or PVC rectangular Box of 175 mm x 100mm and 50 mm deep. |
| 42 | Supply only bakelite sheet not less than 3mm thick for mounting of switch sockets, fan regulators, etc. size 250x200mm or PVC rectangular Box of 250 mm x 200mm and 50 mm deep. |
| 43 | Supply only bakelite sheet not less than 3mm thick for mounting of switch sockets, fan regulators, etc. size 200x150mm or PVC rectangular Box of 200 mm x 150mm and 50 mm deep. |
| 44 | Supply only bakelite sheet not less than 3mm thick for mounting of switch sockets, fan regulators, etc. size 350x300mm or PVC rectangular Box of 350 mm x 300mm and 50 mm deep. |
| 45 | Supply only MCB SP, 6 to 32 Amps 10 KA single pole AC 230 volts |
| 46 | Supply only MCB SPN 63 Amps 16 KA AC 230 volts . |
| 47 | Supply only of rigid non metalic PVC conduit conduct including junction boxes terminal, tees bends, elbows reducers, bell mouth tube ends. |
| 48 | Supply only Linear polycarbonate PVC Baten LED T/L 20W polycarbonated Extruded Chanel Powder Coated with opaque diffuser for glare free light(Cool White) complete with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified. |
| 49 | Supply only Recess Mounting LED down lighter with pressure die cast aluminium heat sink and PC diffuser 15 Watt capacity, environmentlal friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated complete with integrated driver incl all acessories suitable for Armstrong/Grid Ceiling all as specified and directed . |
| 50 | Supply only Recess Mounting LED down lighter with pressure die cast aluminium heat sink and PC diffuser 24 Watt capacity, environmentlal friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated complete with integrated driver incl all acessories suitable for Armstrong/Grid Ceiling all as specified and directed . |
| 51 | Supply only of sheet metal enclosure (Factory made) double door shutter type for distribution board (when MCBs are to be used) single pole and neutral 240 volts 12 way with 200 Amps rated busbar. |
| 52 | Supply only of sheet metal enclosure (Factory made) double door shutter type for distribution board (when MCBs are to be used) single pole and neutral 240 volts 8 way with 200 Amps rated busbar. |
| 53 | All as per srl item No 46 here in beflore but 4 way SPN with 200 amps rated bus bar. |
| 54 | Supply only PVC casing caping and fixing accessories . |
| 55 | Supply only LED lights fitting 1x 10W (2 Ft), 220V, AC, LED batten with square profile and polycarbonate channel. Lithium Ion battery with charging time 8-10 hours and back up time upto 4 hours. |
| 56 | Supply only LED luminaire surface/recess mounted 2ft*2ft, 36 watt,Cool white, 220 volts AC recessed/ surface type fittings, epoxy powder coated CRCA sheet housing with electronic driver, connector block, etc. of Surya/ Bajaj/ Havells/ Crompton/ Philips complete all as specifed and directed. |
| 57 | Supply only LED lamp 12 watt capacity. |
| 58 | Supply only invertor LED lamp 12 watt capacity. |
| 59 | Material for unscrewing body parts of fans of any make/brands and description and opening of the stator & rotor of following sizes of fans and taking out down rod canopy,shackle, condeser housing with rubber reel bushes,ball bearing,metal bush and carry out repairs as directed and as required as under:-(a) M&L for opening the stator & rotor of the 1200mm / 1400 mm sweep and servicing and reassembling of complete fan by fixing servicable old and new parts of fans i.e. rubber bush of condensor & shackle housing , condensor, gun metal bushes,ball bearings twin twisted copper cable down rod assembly with its shackle condenser housing & canopy ,split pins complete all as per manufacturers design air delivery including greasing,oiling & testing of fans all as per manufacturers design & speed complete all as directed & approved for 1200mm sweep.Notes for item NO (i) to (vii) :- (i). The quoted unit rate shall be deemed to be inclusive of taking out defective parts and fixing of new parts. All new parts shall be measured and paid vide relevant items of the schedule. (ii). The rates for refixing & taking out servicable parts shall be deemed to be included of quoted unit rates.(iii). New parts shall be of respective makes of fans.(iv). The quoted unit rates shall also include writing of MES No of fans(v). Unservicable /defective retrived parts shall be credited vide sch of credit(vi). After assembling all fans shall be tested for the speed as directed.(vii). All the fans are laying in store yard of AGE E/M and shall be repaired at store yard only.(viii) Spares to be paid seperately. |
| 60 | All as per srl item No 53 here-in-before but for wall mounting fans/air circulation fans of any size |
| 61 | All as per srl item No 53 here-in-before but for Exhaust fans of 225/250mm/ 300 mm sweep |
| 62 | M&L for cleaning the fan motor assembly body,blade of ceiling fan, filling the cavity & painting with existing colour the ceiling fan/Exhaust fan with one coat of superior quality synthetic enamel paint by spraying appratus and spraying process including writing the MES number on the ceiling fans of 1200mm /1400 mm sweep with black colour synthetic enamel paint all as specified and as directed. |
| 63 | All as per srl item No 53 here-in-before but for wall mounting fan / air circulator of any size |
| 64 | All as per srl item No 53 here-in-before but for Exhaust fans of 225/250mm/ 300 mm sweep |
| 65 | Supply only bearing No 6201/6202 for 1200/1400mm sweep ceiling fans. |
| 66 | Supply only gun metal bush suitable for 1200/1400mm sweep ceiling fan. |
| 67 | Supply only replacement of Clamp nut , bolt incliding safety pin for ceiling fan. |
| 68 | Supply only capacitor 2.5 MFD dry type. |
| 69 | Supply only replacement of Clamp nut , bolt incliding safety pin for ceiling fan. |
| 70 | Repairs and maintenance of water heaters (Geysers) at existing position of any capacity / size mounted on wall by opening nuts and locating the fault and repair / replacement of the unserviceable spares / parts and make it fully functional and reassembling the same after complete repairs in all respects all as specified and directed. NOTE-: Spare parts will be measured seperately. |
| 71 | Supply only heating element 1KW/1.5KW/2KW/3KW, of storage type/instant type water heater of capacity upto 25 Ltr capacity at site complete all as specified and directed. |
| 72 | Supply only repair thermostat / thermal cut out suitable for storage/instant type water heater of capacity upto 50 Ltr complete all as specified and directed. |
| 73 | Supply only hot water extension pipe made out of copper chromium plated 450mm long with brass adaptor and fixing in position complete all as specified. |
| 74 | Supply only 450mm long PVC connector with brass adaptor, washer and fixing in position complete all as specified. |
| 75 | Supply only indicator for geysers on red and green colour all as specified |
| 76 | Supply only single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 1.5 Sqmm in existing PVC casing caping/ new as per site requirement complete all as specified and directed by Engr in Charge. |
| 77 | Supply only single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 2.5 Sqmm in existing PVC casing caping/ new as per site requirement complete all as specified and directed by Engr in Charge. |
| 78 | Supply only single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 6 Sqmm in existing PVC casing caping/ new as per site requirement complete all as specified and directed by Engr in Charge. |
| 79 | Supply only single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 10 Sqmm in existing PVC casing caping/ new as per site requirement complete all as specified and directed by Engr in Charge. |
| 80 | Supply only Linear Polycarbonate Baten, inbuilt sensor based on smart LED auto dimmable from 100% of rated wattage to 30% on sensing of movement/occupancy, baten 20W Aluminium Extruded Chanel Powder Coated with opaque diffuser for glare free light complete with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified. |
| 81 | Supply only Linear Polycarbonate Baten, inbuilt sensor based on smart LED auto dimmable from 100% of rated wattage to 30% on sensing of movement/occupancy, baten 10W Aluminium Extruded Chanel Powder Coated with opaque diffuser for glare free light complete with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 31, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender