Tender For Repairs To Joinery, Plastering And Other Allied Works For Md Accn For Zone ‘A At Age B/R- I Under Ge (W) Agra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Aug 2026
19 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Joinery, Plastering And Other Allied Works For Md Accn For Zone ‘A At Age B/R- I Under Ge (W) Agra
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm complete all as specified and directed by Engr-In-Charge. |
| 2 | Taking down shutters of any description exc 1 Sqm but not exc 2 each complete all as specified and directed by Engr-In-Charge. |
| 3 | M&L for Mild steel farmed work as in doors (as in ckowkats) or gates of angle or other section with guest plates rail, brasses rail etc exculsive of steel sheeting or other covering hanging also fastening and fixing complete confirming to Gde Fe-290 including shop coat of red oxide including prepration of surface before fixing complete all as specified and directed by Engr-In-Charge. |
| 4 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/window/ ceosetory windows & other frames / chowkhats of size 50x100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast / lugs/ SS dash fastners of required data and length complete as per direction by Engr-In-Charge. (M.S Hold fast/ lugs or SS dash fasteners shall be paid for separately.) |
| 5 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/window/ ceosetory windows & other frames / chowkhats of size 65x125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast / lugs/ SS dash fastners of required data and length complete as per direction by Engr-In-Charge. (M.S Hold fast/ lugs or SS dash fasteners shall be paid for separately.) |
| 6 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and including 100mm long stainless steel butt hinges -04Nos with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engr-In-Charge. |
| 7 | S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-In-Charge. |
| 8 | S&F 35mm thick, 2nd class hard wood in glazed skelton shutters, open rebated and prepare to receive glass/gauge, with or without sash bar, edges of framing plain chamfered or rounded fitted with cut and mitred beads for scecuring glass etc. complete all as specified and directed by Engr-In-Charge. |
| 9 | M&L preparation of wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-In-Charge. |
| 10 | Taking down chowkhats or frames not exc 1.5 Sqm each with shutters complete all as specified and directed by Engr-In-Charge. |
| 11 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified in clause No. 8B.2 at Sl page No. 143 to 144 and shown in drawing on sl page No 156 of SSR 2010 respectively and as complete all as specified and directed by Engr-In-Charge. |
| 12 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, incl fixing arrangement, suppling & fixing in opening as per specification complete all as specified and directed by Engr-In-Charge. |
| 13 | S&F mild steel hold fast and similar small article confirming to fe 410-0 or fe 310-0.complete all as specified and directed by Engr-In-Charge. |
| 14 | Supply and fixing factory made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. complete all as specified and directed by Engr-In-Charge. |
| 15 | S&F for factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass or wiremesh shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.complete all as specified and directed by Engr-In-Charge. |
| 16 | S&F powder coated aluminium three track sliding windows (Two nos. glazed & one no. wire mesh panels) with fly proof shutters having top rail of section 41mmx20mmx1.6mm thick, bottom rail of section 41x20x1.6mm thick ,vertical style of section 38x20x1.6mm thick with aluminium anodised chowkhats of section 84.68x50x1.6mm thick including necessery jointing cleats ,glazing clips, rubber packing ,snap beading, screws 100mm long handle and locking system etc, fitted with 5mm thick sheet glass tinted and other shutter with stainless steel wire cloth 0.36 mm dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire stapples. complete all as specified and directed by Engr-In-Charge. |
| 17 | S&F Mild steel framed work such as grill grating etc with ends of bars shouldered or riveted or forged into spikes frame guard bars etc all as specified. |
| 18 | M&L preparation of new or previously untreated steel surfaces exc 10 cm width or girth and applying two coat of synthetic enameled paint over one coatof red oxide primer complete all as specified and directed. |
| 19 | S & F in repair stainless steel curtain rods 304 grade or 25mm dia as in doors/windows SS brackets fancy type including screws and other necessary fitting (Knob) for fixing brackets SS funnels for 25mm dia dropry rod fixed at each end of rods compete all as specified and directed. |
| 20 | M & L in repair 18mm thick coloured PVC board prelaminated both sides including cutting, screwing as in kitchen cabinet, almirah shutter including teakwood liping 6mm thick complete all as specified and directed by Engr-In-Charge. |
| 21 | S&F 125mm Stainless steel Hasp and Staple, safety type including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-In-Charge. |
| 22 | S & F 40mm width Countinious (Piano) type hinges, mild steel bright finish or electrogalvanised complete all as specified and directed by Engr-In-Charge. |
| 23 | S & F 100mm Stainless steel handle for kitchen cabinet complete all as specified and directed by Engr-In-Charge. |
| 24 | S & F Brass magnet catcher suitable for CB/cabinet shutter complete all as specified and directed by Engr-In-Charge. |
| 25 | S&F 150 mm long Double action spring hinges, mild steel with steel wire spring, stoveenamelled, black complete all as specified and directed by Engr-In-Charge. |
| 26 | S&F stainless steel 200mm long barrel tower bolt of extruded section complete all as specified and directed by Engr-In-Charge. |
| 27 | S&F Stainless steel door bolt, 300 mm plate type, , with bright bolt not less than 12 mm dia with and incl a min of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed by Engr-In-Charge. |
| 28 | S & F stainless steel handles size 150mm fabricated type anodised complete all as specified and directed by Engr-In-Charge. |
| 29 | S&F butt hinges stainless steel of 100mm size complete all as specified and directed by Engr-In-Charge. |
| 30 | S&F Floor door stopper 150 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engr-In-Charge. |
| 31 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack or stainless steel wire staples complete all as specified and directed by Engr-In-Charge. |
| 32 | S&F in repairs stainless steel 200mm long barrel tower bolt of extruded section complete all as specified and directed by Engr-In-Charge. |
| 33 | S&F in repairs Stainless steel door bolt, 300 mm plate type, , with bright bolt not less than 12 mm dia with and incl a min of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed by Engr-In-Charge. |
| 34 | S&F in repair Floor door stopper 150 mm long of stain less steel and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engr-In-Charge. |
| 35 | S & F in repair stainless steel handles size 150mm fabricated type anodisedcomplete all as specified and directed by Engr-In-Charge. |
| 36 | S&F in repair butt hinges stainless steel of 100mm size complete complete all as specified and directed by Engr-In-Charge. |
| 37 | S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack or stainless steel wire staples complete all as specified and directed by Engr-In-Charge. |
| 38 | Hacking out old broken glass (any thickness, size, quality or description) complete all as specified and directed by Engr-In-Charge. |
| 39 | M&L 3mm thick ordinary quality sheet glass and glazing with oil putty in square not exc 0.5 Sqm in each panecomplete all as specified and directed by Engr-In-Charge. |
| 40 | S&F figured sheet glass 3.00mm thick pin headed type and glazing with oil putty in square n.exc 0.5 sqm in each pan complete all as specified and directed by Engr-In-Charge. |
| 41 | Taking down cement or cemant lime plaster of any discription on bricks or stone ceiling etc including racking out joints, hacking for key, scrubbing down with water and including M&L for 5 mm thick smart care ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) ceiling surface and also including M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed by Engr-In-Charge. |
| 42 | Taking down cement or cemant lime plaster of any discription on bricks or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water and including M&L for 10 to 12 mm thick smart care ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) over interior surface of wall including M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over two or more coat of Birla putty complete all as specified and directed by Engr-In-Charge. |
| 43 | Taking down cement or cemant lime plaster of any discription on bricks or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water and including M&L for 10 to 12 mm thick smart care ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) over exterior surface of wall M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of 1mm thick waterproofing putty complete all as specified and directed by Engr-In-Charge. |
| 44 | Providing & applying rising damp-proof costing system with single component ready to use damp- proof coating Roff Hydamp : 1. Surface preparation thoroughly brush and clean all, loose particles such as dirt, grease, mortar droppings , release agents, efflorescence, bird droppings , etc. All large volds or hollow portions must be removed and re-plastered , Non - moving cracks having width upto 5 mm must be filled with polymer based back filler. 2. APPLICATION : Apply the first coat of Dr fixit Damp guard Classic with a paint brush directly on the prepared surfaces by mixing (1 part base : 1 part hardner : 1 part of water). Allow to dry for a minimum 2-3 hrs . Apply one part of DAMP GUARD mixed chemical and 2 parts of OPC white cement / Birla putty and make the putty , apply putty on the entire surface area. Allow it to dry for at least 3-4 hours . Apply the Final coat of Dr Fixit Damp guard classic on the entire surface and allow the surface to air cure 48 hours proceeds for Paint. complete all as specified and directed by Engr-In-Charge. |
| 45 | M&L cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in bed blocks for fixing hold fasts etc. ccomplete all as specified and directed by Engr-In-Charge. |
| 46 | Dismantling floor, hearth wall tiling including cement and sand mortar bedding (but not backing) including rubbish off the premises and including M&L for non-skid coloured ceramic tiles 7 to 8mm thick, (square/rectangular) area of each tile exc 0 .06 Sqm but not exc 0.11 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured or white cement to match the colour of tiles as in floor over 12 mm thick screed bed in smart care ready mix mortar complete all as specified and directed by Engr-In-Charge. |
| 47 | Dismantling floor, hearth wall tiling including cement and sand mortar bedding (but not backing) including rubbish off the premises and including M&L for non-skid coloured ceramic tiles 7 to 8mm thick, (square/rectangular) area of each tile exc 0 .11 Sqm but not exc 0.18Sqm as in floors set and jointed in neat cement slurry and pointed in coloured or white cement to match the colour of tiles as in floor over 12 mm thick screed bed in smart care ready mix mortar complete all as specified and directed by Engr-In-Charge. |
| 48 | Dismantling floor, hearth wall tiling including cement and sand mortar bedding (but not backing) including rubbish off the premises and including M&L for non-skid coloured ceramic tiles 7 to 8mm thick, (square/rectangular) area of each tile exc 0 .11 Sqm but not exc 0.18Sqm as in floors set and jointed in neat cement slurry and pointed in coloured or white cement to match the colour of tiles as in wall as a skirting over 12 mm thick in smart care ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) complete all as specified and directed by Engr-In-Charge. |
| 49 | Dismantling floor, hearth wall tiling including cement and sand mortar bedding (but not backing) including rubbish off the premises and M&L including Vitrified coloured tiles 7.5 to 10mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.36 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 12mm thick screed bed or bedding layer of cment mortar smart care ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) complete all as specified and directed by Engr-In-Charge. |
| 50 | Dismantling floor, hearth wall tiling including cement and sand mortar bedding (but not backing) including rubbish off the premises and M&L including Vitrified coloured tiles 7.5 to 10mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.36 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid wall as a skirting and including 12mm thick screed bed or bedding layer of cement mortar smart care ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) complete all as specified and directed by Engr-In-Charge. |
| 51 | Dismantling floor, hearth wall tiling including cement and sand mortar bedding (but not backing) including rubbish off the premises and including M&L for coloured glazed ceramic tiles in vertical surface 300 x 450 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 12mm thick rendering in smart care ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) on brick wall complete all as specified and directed by Engr-In-Charge. |
| 52 | Dismantling floor, hearth wall tiling and including cement and sand mortar bedding (but not backing) including rubbish off the premises and including M&L 18/20mm thick black granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window cills, cooking plateforms and like in premix cement mortar including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of stone including rounding and moulding of edge and making hole for cooking gas pipe incl 12mm thick smart care ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) complete all as specified and directed by Engr -In-Charge. |
| 53 | Dismantling floor, hearth wall tiling and including M&L Machine cut kota stone slab for 18-20mm thick fix with cement and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 12mm thick smart care ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) complete all as specified and directed by Engr -In-Charge. |
| 54 | M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 including demolition of old brick work built in cement mortar complete all as specified and directed by Engr-In-Charge. |
| 55 | M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 including demolition of old brick work built in cement mortar complete all as specified and directed by Engr-In-Charge. |
| 56 | Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 including demolition of old brick work built in cement mortarcomplete all as specified and directed by Engr-In-Charge. |
| 57 | M&L for 10 to 12 mm thick smart care ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) over interior surface of wall complete all as specified and directed by Engr-In-Charge. |
| 58 | M&L for 10 to 12 mm thick smart care ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) over exterior surface of wall complete all as specified and directed by Engr-In-Charge. |
| 59 | M&L Preparing newly plastered or un plastered surfaces of wall and applying two coats of oil bound distemper with roller application over a coat of primer over and including two or more coat of wall care putty on new plastered surfaces complete all as specified and directed by Engr-In-Charge. |
| 60 | M&L for preparation of plastered for new surfaces of walls and applying two coats of cement base paint over waterproofing putty complete all as specified and directed by Engr-In-Charge. |
| 61 | S&F pre cast RCC lintel type (1:1.5:3), 20mm graded aggregate including 4 Nos 12mm dia main bar and 8mm dia bar stirrups @150mm c/c, RCC 230mm width,150mm thick and length opening portion including extra 150mm both side complete all as specified and directed by Engr-In-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender