Tender For Estimate For Washroom In Lehlan Ziledar Office.
Tender Value
2.63 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
10 days left
EMD
5300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sangrur → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For Washroom In Lehlan Ziledar Office.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of brick work in cement |
| 2 | Earth work in excavation of foundation all kind of soils where pick jumper work is not allowed |
| 3 | First class brunt brick work laid in cement sand mortar 1 : 4 in foundation and plinth upto height of 4 meters |
| 4 | Damp proof course 7.5 Cm thick cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded |
| 5 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. |
| 6 | Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete |
| 7 | 12.5 mm thick cement plaster 1:4. |
| 8 | 12.5mm thick cement plaster 1:5. |
| 9 | Laying of Dry Brick Ballast 40 mm gauge for flooring. |
| 10 | Cement concrete 1:4:8 (over brick ballast) With stone aggregate 40mm mixing by manual means |
| 11 | Cutting holes upto 23cm square for pipes in flooring and roofs of bricks, tiles with lime concrete or cement concrete and making good including repointing, replastering and colour or white washing where required. Through floor or roof 11.5cm thick (Lumpsum |
| 12 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition.Size 75 mm x 75 mm (Lumpsum) |
| 13 | Supply & Fixing of pressed steel frames (Chowkats) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section(standard design latest) including iron lugs (hold fasts) iron hinges, confirming to P.W.D. specifications including bolts for fixing stops, lock-notch provision for receiving tower bolts, Hydraulic spring and finished with one priming coat of approved quality, fixed in position, including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete. Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg/rmt |
| 14 | Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, Cillral mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitred and electrically flash- welded, with iron fittings incluidng necessary iron handles,hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire guage) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire guage and grill will be paid as per respective items) |
| 15 | Extra for providing & fixing Steel Tube beading size 12mm x 12mm, 18 guage of approved shape and section with screw for fixing of glass panes in stead of glazing clips and metal slash putty in steel doors, windows & Ventilators complete in all respect |
| 16 | Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. Glass panes 3mm or 8.44 kg per sqm upto 0.4 sqm area |
| 17 | Erection of Ceiling/ Cabin/ Exhaust fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75sq.mm complete:- Erection of Exhaust fan with louver shutter on the wall/ window grill |
| 18 | Erection of light fixtures on wall/ ceiling having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75sq.mm complete: Erection of 1X20/28/36/40W Box Type (LED/ Fluorescent) light fixture |
| 19 | Making soak pit 2.5 m outer Diametre 3.0 metre deep 230mm thick 1:5 brick work honey comb with bricks of Ist Class and S.W. drain pipe 100 mm Diametre, 1.8 m long complete as per standard design. Making soak pit 2.5 m outerDiametre 3.0 metre deep 230mm thick 1:5 brick work honey comb with bricks of Ist Class and S.W. drain pipe 100 mm Diametre, 1.8 m long complete as per standard design. |
| 20 | Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge |
| 21 | Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer-in- charge. |
| 22 | Providing and fixing 110 mm dia. U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. |
| 23 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading |
| 24 | Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 25 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make ( to the approval of Engineer-in-charge)consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap complete in all respect. Size 550 mm x 400 mm x 815 mm |
| 26 | Providing and fixing vitreous chinaware standard pedestal of approved make ( to the approval ofEngineer-in-charge)for wash basin complete in all respect. Vitreous chinaware standard white pedestal for wash handbasin. |
| 27 | Extra for providing and fixing PVC 32mm waste pipe . |
| 28 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval ofEngineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in allrespect. |
| 29 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Double Layer Tanks |
| 30 | Providing and laying, jointing fixing and testing G.I. Pipe lines B-Class including cost of specials such as tees, bends,sockets, elbows etc. esting, cutting, threading Inside complete.15mm i/d building |
| 31 | Providing and laying, jointing fixing and testing G.I. Pipe lines B-Class including cost of specials such astees, bends,sockets, elbows etc. esting, cutting, threading Inside building complete.20mm i/d |
| 32 | Providing and laying, jointing fixing and testing G.I. Pipe lines B-Class including cost of specials such astees, bends,sockets, elbows etc. esting, cutting, threading Inside building complete.25mm i/d |
| 33 | Providing, fixing and jointing Union Couplings in G.I. Pipe lines.15mm i/d G.I Union |
| 34 | Providing, fixing and jointing Union Couplings in G.I. Pipe lines.20mm i/d G.I. Union |
| 35 | Providing, fixing and jointing Union Couplings in G.I. Pipe lines.25mm i/d G.I. Union |
| 36 | Provo/ding, fixing and jointing gun-metal peet valves (Heavy Pattern) with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.20mm i/d Gun Metal peet valve heavy pattern. |
| 37 | Cutting holes upto 23cm square for pipes in flooring and roofs of bricks, tiles with lime concrete or cement concrete and making good including repointing, replastering and colour or white washing where required.Through floor or roof 11.5cm thick |
| 38 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition.Size 75 mm x 75 mm (Lumpsum) |
| 39 | Providing and fixing in position automatic brass ball valves in tanks. 20mm i/d Brass ball valve with plastic ball with G.I. socket |
| 40 | Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes to I.S.I. 13592 of approved make (to the approval of EIC) including cutting, jointing, wastage, but excluding cost of lead jointing.110mm i/d SWR UPVC pipe lines laid complete |
| 41 | Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes to I.S.I. 13592 of approved make (to the approval of EIC) including cutting, jointing, wastage, but excluding cost of lead jointing.90mm i/d SWR UPVC pipe lines laid complete |
| 42 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 110mm i/d pipes Single Tee WithDoor |
| 43 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm includingcutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 110mm i/d pipes Vent Cowls |
| 44 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 110mm i/d pipes Coupler |
| 45 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 110mm i/d pipes P Trap/Floor Trap 110mm x 75mm |
| 46 | Providing & Fixing in postion 15 mm i/d bib cock of best quality (as approved by the Engineer-in-charge). C.P. brass Bib cock foam flow without flange |
| 47 | Providing & Fixing in postion stop cock / Angle valve (as approved by the Engineer- incharge). C.P.brass 15mm Angle valve |
| 48 | Providing and fixing in PVC flexible tube connection of approved make complete in all respects.Size 15mm x 300mm with CP brass Nut |
| 49 | Providing & Fixing in position C.P. Brass extension piece 15mm dia, 15mm long or 25mm long or 50mm long with various fixtures complete in all respects (as required by the Engineer-in- Charge) C.P. Brass extension piece, 25mmlong to 50mm long |
| 50 | Providing and fixing in position GI tank nipple of approved make (to the aapproval of EIC) in PVC wtater storage tanks complete in all respects.G.I. Tank Nipple 20mm i/d |
| 51 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. |
| 52 | Factory manufactured Solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1(1999),Commercial with elm or gurjan facing on both \ Sides with laminated core andlipped edges:- 35mm thick |
| 53 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to getrequired finish |
| 54 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade |
| 55 | Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including groutingwith cement sand mortar 1:4 and top surface to be left clean after wire brushing |
| 56 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS :15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shadecomplete. |
| 57 | Dismantling roofing mud roofing with wooden planks laid over battens |
| 58 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) |
| 59 | (10.13) Cement 1:2:4 concrete With stone ballast or shingle mixing by manual means |
| 60 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth |
| 61 | First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth |
| 62 | 12.5 mm thick cement plaster 1:2 |
| 63 | Cement rendering on plaster 1mm thick |
| 64 | Earth work in excavation for storage and sedimentation tanks, high level tanks, filter beds, clear water reservoirs, pump houses, sumps, screening chambers and other similar works having straight or open cuttings in foundations trenches etc. with 3D Excavator/ JCB including manually dressing of bed, trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, includingdressing of bottom and sides of trenches, stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering dressing and disposal of surplus soils as directed upto 15 metre complete in all respects.A) Depth upto 1.5 m B.G.L All classes of soil except rocky |
| 65 | Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturers permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1cement: 2 sand: 4 stone aggragate) complete as per design. |
| 66 | Providing and fixing RCC manhole covers only 560mm i/d RCC man hole cover only as per ISI Medium duty |
| 67 | Providing and fixing in position H.C.I. soil waste vent or antisyphonage pipes to I.S.I. specification of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of lead jointing.100mm i/d H.C.I. pipe lines laid complete |
| 68 | Providing lead caulked joints to H.C.I. pipes and specials conforming toI.S.I. Specification of E.L.C. manufacture or any other reputed firm including cost oflead yarn,fuel and tools etc 100mm i/d (1.36 kg.) |
| 69 | Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications ofE.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining For 100mm i/d pipes 100mm i/d Cowls Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender