Tender For Addn/Altn Of Wash Basin, Sink & Utensils Rack In Md Accn Of Jcos/Or (Double Storey) And Connected B/R Wks At Vikram Batra Vihar Under Ge (West), Delhi Cantt -10
Tender Value
43.58 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
6 days left
EMD
87160
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Altn Of Wash Basin, Sink & Utensils Rack In Md Accn Of Jcos/Or (Double Storey) And Connected B/R Wks At Vikram Batra Vihar Under Ge (West), Delhi Cantt -10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down door/window/ventilator frames with shutters not exc 1.50 sqm each (without taking off shutters from frame) all as specified & directed. |
| 2 | Taking down door/window frames with shutters exc 1.50 sqm but not exc 4.00 sqm each (without taking off shutters from frame) all as specified & diected. |
| 3 | Demolition of reinforced cement concrete as in Chajja, RCC parapet, Kitchen slab, Chullah hood, chimney portion and similar work concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 4 | Taking up or down 15mm dia bore of galvanised Iron steel tubing and connections including, cutting/chasing in wall/floor complete in all respect as specified & directed |
| 5 | Taking up or down 20mm dia bore of galvanised Iron steel tubing and connections including, cutting/chasing in wall/floor complete in all respect as specified |
| 6 | Demolition of cement concrete (unreinforced) / sunken floor in ground floor and paving not exc. 15cm thickness (below or above ground level) all as specified & directed. |
| 7 | Demolition and breaking up drain pipes (SGSW, AC, PVC or reinforced cement) set in cement mortar internal dia of pipe 100mm complete all as specified and directed. |
| 8 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed. |
| 9 | Taking down carefully cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as specified & directed. |
| 10 | M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 11 | S&F rolled MS Work section as in framing for door/window/vent /CB chowkats/kitchen cabinet supporting/window grill sunshade welded frame and the like fixed with angle cleat and connecting plates including welding of butt hinges and similar work confirming to Fe - 410-W(Gde E-250) quality 'A' cooler stand shall be fitted upto 2 storey height complete all as specified and directed. |
| 12 | M&L for powder coated aluminium ventilator, openable, top hung and bottom portion fixed type without sash bars with aluminium section of weight 0.55 kg/RM including glazing, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and top hung shutter fixed hook & eye minimum one no on each shutter, one no aluminium tower bolt 100mm long and 75mm long aluminium handle in each shutter etc. complete all as specified and directed. Note : glazing, wire mesh shall be measured and paid separately against respective items. |
| 13 | S&F powder coated (minimum thickness of powder coating 50 micron) aluminium sliding three track window, three shutter Series B (SHUTTER SECTION-18mm) with two glazed shutters each covering one half opening and one gauged shutter covering one half opening including self closing locking arrangement, stoppers and rubber beading gasket without sash bar aluminum section weighing 1.06 Kg/RM including necessary jointing cleats glazing clips rubber packing powder coated aluminum beading screws including fittings in each shutter with 5 mm thick tinted glass & also including stainless steel wire cloth of 0.36 mm dia and avg width of aperture 1.40 mm and EPDM, neoprene rubber, rollers, etc complete all as specified and directed.Note:- Three way track sliding window of frame size 92x31.75x1.5 mm and shutter size 40x18mm with 9mm interlocking leg x 1.45mm thick and weight not less than 0.607kg/RM. |
| 14 | S&F glazed skelton shutter 2nd class hard wood 35 mm thick rebated as in doors,and prepared to receive glass, gauge etc with sash bars edges of forming plain,chamfered or rounded fitted with mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I section 8,clause 8.24(a) etc.complete all as specified and directed. |
| 15 | S&F of stainless steel handles 125 mm size for kitchen cabinet shutters and bed room cub boards complete all as per specified and directed. Make: ( Hettich, Ebco, Prime, Inox or equivalent) |
| 16 | S&F 1.00 mm thick plain black mild steel sheeting as in door shutter covering including, welding or soldered joint complete all as specified and directed. |
| 17 | M&L for Cutting holes in brick walls in cement mortar for inserting hold fast and similar works etc. and making good to dismantled portion in CM 1:3 or cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) in wall exc half brick but n exc one brick thick complete all as specified and as directed. |
| 18 | M&L for Mild Steel work as in hold fasts confirming to FE-290 Gde E 165 complete all as specificed and directed |
| 19 | S&F 4mm thick Figured glass, pin head type and glazing with oil putty in sqr n exc 0.5 sqm in each pane fixed in bottom two pane in windows etc complete all as specified and directed. |
| 20 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia or wire and an average width aparture 1.18 mm and fixed with tinned tack or stainless steel wire staple complete all as specified and directed. |
| 21 | S&F 100 mm Stainless steel butt hinges medium weight cold rolled fixed to doors with SS screws complete all as specified and directed. |
| 22 | S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as specificed and directed. |
| 23 | S&F 75 mm butt hinges medium weight cold rolled mild steel for kitchen cabinet below slab complete all as specificed and directed. |
| 24 | S&F 150mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed. |
| 25 | S&F 125mm long aluminium handles cast type anodised ISI Marked complete all as specified and directed. |
| 26 | S&F 75mm overall length of aluminium alloy body Floor door stopper and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 27 | S&F 200mm, mild steel ordinary rat tail rod pattern springs includng roller and roller plate complete incl necessary welding if required complete all as specified and directed. |
| 28 | S&F 250mm long MS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 29 | S&F 200mm long Mild steel barrel tower bolt, stove enamelled black, with bright bolt. All as specified and directed. |
| 30 | M&L Formwork to soffits of suspended slabs such as kitchen slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat rough finished surfaces of concerete all as specified and directed. |
| 31 | M&L for reinforced cement concrete Nominal Mix using type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like concerete all as specified and directed. (Note :- Steel reinforcement bars shall be measured and paid separately under relevant items) |
| 32 | M&L for mild steel TMT bars upto 10mm dia and over cut to length,bent to shape required including cranking, biniding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 33 | M&L for 18-20mm thick black granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms and like in including 15mm thick CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl polishing and making hole in the platform for gas connection complete and incl nosing of the edges half round complete all as specified and directed. |
| 34 | Supply and apply a glass fibre reinforced acrylic modified cementitious coating system.Prepration of surface of sunken portion and M & L for glass fibre reinforced acrylic modified cementitious coating system as Top coat: SikaTop® Seal-107 @ 1.5 kg/m2 over reinforcement: Sika® Fab-1 over base coat: SikaTop® Seal-107 @ 1.5 kg/m2 etc including Supply and apply a protection plaster (12 – 15 mm) admixed with appropriate integral waterproofing compound Sika® Plastocrete Plus @0.10 kg per bag of cement. The product should conforms to IS 2645. all as specified and directed. System should have compressive strength: 20 N/mm2; bond strength: 2.0 N/mm2. |
| 35 | M&L for PCC 1:5:10 type E-2 (40 mm graded crushed stone agg) as in sunken floors complete all as specified and directed. |
| 36 | S&F tubes Galvanised Steel 40 mm bore medium grade galvanised in spout in sunken with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 37 | S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern' size 580 x 440 mm white with integral foot rests (excluding flushing cistern), including flush pipe of polyethylene of low or high density, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete trap set in concrete and including S&F 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed. |
| 38 | Supply only 100mm bore cast iron 'P' Traps complete all as specified & directed. |
| 39 | S&F in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket all as specified & directed. |
| 40 | S&F in repairs PVC Connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 41 | S&F 15mm bore bib taps chromium plated fancy type cast copper, screwed down, screwed for iron pipe or for brass ferrule & fixed for GI / CPVC pipe including taking down of existing PVC bib tap.complete all as specified and directed. |
| 42 | S&F in repairs chromium plated brass overhead shower rose 125 mm size swivel type with long chromium plated arm rod including fixing to steel pipe or union complete all as specified and directed |
| 43 | S&F stainless steel plate rack Gde 304 made of 0.80mm thick sheet of size 750x750x250mm fixed to wall with suitable rawl plug complete all as specified and directed. |
| 44 | S&F in replacement sinks made of stainless steel 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 45 | S&F in replacement countersunk oval shape vitreous china wash hand basin of size 550X460mm/550X430mm complete all as specified and directred. |
| 46 | S&F in repair 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed. |
| 47 | S&F in repair 32mm dia and 90 cm long PVC waste pipe complete all as specified and directed. |
| 48 | S&F in repair 15mm dia Brass wall mixer with conversion bend 2 in 1 chromium plated brass fancy type with all connection slieves, Capstain head, screwed down complete all as specified and directed. |
| 49 | S&F in repair 15mm dia Brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe including all necessary arrangement etc, complete all as specified. |
| 50 | S&F in repair 15mm dia Brass CP sink mixer for mixing hot & cold water screwed down for iron pipe including all necessary arrangement etc, complete all as specified. |
| 51 | S&F in repair 15mm bore dia stop valves cast copper alloys, screwed down high pressure but fancy type chromium plated (stop valve/angle valve) with crutch, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 52 | S&F in repairs 75mm bore cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 53 | M&L in replacement looking mirror size 600x450mm bevelled edge mirror of selected quality mounted on 6mm commercial plywood and fixed with brass screw and cup washer complete all as specified and directed. |
| 54 | S&F 20mm bore gun matel globe or gate valves with iron wheel, screwed both ends for iron pipes fixed complete in all respect as specified. |
| 55 | S&F CP soap dish fixed to wall with brass screw complete all as specified and directed. |
| 56 | S&F tubular towel rails 20mm dia, D type 60cm long between flanges of brass chromium plated.complete all as specified and directed. |
| 57 | Dismantling water tank exc 250 but n exc 500 ltr and removing, including float valve & necessary tank fittings etc complete all as specified & directed. |
| 58 | S&F 500 ltrs capacity rotational molded polyethylene water storage tanks (4 layers ) (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 59 | S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia complete all as specified and directred. |
| 60 | S&F 20mm GI tank nipple suitable for HDPE water tank complete all as specified and directed. |
| 61 | M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortea1:3 to ends or edges of cills, shelves lintel etc and cutting chases for concealed water tubing and making good ,cutting girth exc10 cm but nexc 20 cms.complete all as specified and directed. |
| 62 | S&F Supplying and laying of CPVC 20 mm pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all special fittings (Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor etc), Unions, Ball valves, Flange and tank adaptor complete in all respect as specified. |
| 63 | S&F Supplying and laying of CPVC 25 mm pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all special fittings (Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor etc), Unions, Ball valves, Flange and tank adaptor complete in all respect as specified. |
| 64 | S&F 25 mm outer dia CPVC gate valve for CPVC pipe complete all as specified and directed. |
| 65 | S&F in repair 20 mm dia stainless steel tube for curtain rod including pair of suitable S.S brackets and fancy type SS Gde 304 finals approved by GE including taking down old pelmet boxes with curtain rods complete all as specified and directed. |
| 66 | M&L 75mm thick PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in floors/pavings /plinth protection etc, finished even and fair with using extra cement grooves filled with bitumen mastic filling of mix (1:2) (bitumen and sand) complete all as specified and directed. |
| 67 | M&L for sunken treatment as following over it complete all as specified and as directed:-(a) Rendering 10 mm thiick in CM 1:4,(b) Two coats of tapecrete mixed (1:2) with cement slurry @ 3Kg/sqm per sqm or as per manufactures's instruction, surface finished even and smooth(c) Applying a coat of bitumen primer @ 0.70 kg /sqm, applying one coat of hot bitumen 85/25 gde @ 2.6 kg/sqm (d) Applying one layer of 0.5 mm thick fibre tissue/APP membrane |
| 68 | Supply only Liquid water proofing compound, complete all as specified and directed. |
| 69 | M&L Glazed ceramic tiles coloured joint free tiles 350 x 250 x x7mm /450x350x7mm thick in vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including rendering 10mm thick backing coat in CM 1:3 including dismantling of existing tiles or terrazo finish including cement mortar bedding of any thickness complete all as specified and directed. |
| 70 | M&L Non skid ceramic coloured joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15mm thick in cement mortar (1:4) laying floor finish including dismantling of existing tiles or terrazo finish /roughening surface of old concrete floor including cement mortar bedding of any thickness complete all as specified and directed. |
| 71 | M&L painting two coats of synthetic enamel paints over and including a coat of red oxide primer on new steel surfaces exc 10cm girth including preparation of surfaces complete all as specified and directed. |
| 72 | M&L painting two coats of synthetic enamel paints over and including a coat of pink primer on wooden surfaces of girth exc 10 cm including preparation of surfaces. complete all as specified and directed. |
| 73 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length including mild steel stack clamps fixed in cement concrete 1:2:4 blocks with rubber ring joints fixed to walls complete all as specified and directed. |
| 74 | S&F 110mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed. |
| 75 | S&F cast iron spun pipe soil, waste and vent pipes 100mm bore sand cast in any length with or without ears, with lead joints, laid in trenches or in floors including disamntling of existing PVC/SWG pipe and jointing to GT and Manholes pipes complete all as directed. |
| 76 | S&F cast iron spun pipe soil, waste and vent pipes 100mm bore CI Pipe in any length with or without ears, with lead joints, laid in vertical surfaces including dismantling of existing PVC pipes complete all as directed. |
| 77 | S&F cast iron spun pipe soil, waste and vent pipes 75 mm bore CI Pipe in any length with or without ears, with lead joints, laid in trenches or in floors including dismantling of existing pipe and jointing to GT and Manholes pipes complete all as directed. |
| 78 | S&F cast iron spun pipe soil, waste and vent pipes 75mm bore CI Pipe in any length with or without ears, with lead joints, laid in vertical surfaces including dismantling of existing PVC pipes complete all as directed. |
| 79 | S&F 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 80 | S&F 100mm bore cast iron double branch peace Y with oval access doors complete all as specified and directed. |
| 81 | S&F 100mm bore cast iron branch pieces,T bend single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel brenches oval access doors complete all as specified and directed. |
| 82 | S&F 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 83 | S&F 75mm bore cast iron bends with oval access doors(any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 84 | Supply only lead joint material for 100mm bore cast iron pipe and fittings etc complete all as specified and directed. |
| 85 | Supply only lead joint material for 75mm bore cast iron pipe and fittings etc complete all as specified and directed. |
| 86 | S&F 100mm MS clamp 50 x 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts including securing to wall in PCC (1:2:4) and making good in cement mortar (1:3), complete all as specified and directed. |
| 87 | S&F 75mm MS clamp 40 x 6 mm flat iron and 12 mm dia round iron stays including bolts and nuts including securing to wall in PCC (1:2:4) and making good in cement mortar (1:3), complete all as specified and directed. |
| 88 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed. |
| 89 | M&L Brick work with sub class 'B' brick staight or curved on plan to any radius in half brick thick wall built in CM 1:4 etc complete all as specificed and directed. |
| 90 | M&L 10 mm thick rendering 1:6 of cement mortar on wall external/internal surface finished fair even and smooth without using extra cement as whole or in patch complete all as specificed and directed. |
| 91 | M&L 5mm thick rendering of cement mortar of approved make (having ratio equivalent to CM 1:3) of ceiling surface finished fair even and smooth without using extra cement as whole or in patch complete all as specificed and directed. |
| 92 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over and including a coat of primer complete all as specified and directed. (Note: Work be done through applicator approved). |
| 93 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash all as specified and directed. |
| 94 | Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section, in cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate, smooth finished and reforming benching as required for 150mm bore of pipe. complete all as specified and directed. |
| 95 | S&F in repairs salt glazed stone ware gully traps 150 x 150mm square mouth `P' type complete all as specified and directed. |
| 96 | Dismantling loose concrete cover of RCC coloums, beams slabs, Chajjas, and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including dusting of steel reinforcement, providing fabric mild steel wire mesh 75 mm x 75 mm of 2 mm dia as reinforcement to concrete surfaces, applying adhesive/admixture over steel mesh and providing 25 mm thick (average thickness) guniting mix (using 1 part of ordinary portland cement 53 grade and 2 parts of Badarpur sand mixed with adhesive/admixture at the rate as per manufacturers instruction or 2% by wt of cement all as directed with a pressure of 2 to 2.5 kgs per sqm by guniting machine and surfaces finished even and fair, including plaster in CM 1:4 of required thickness, to make proper Geographic shape as per site requirement, necessary padding, steel scaffolding and shuttering for working platformm/formwork etc complete all as directed. Please Enable Macros to View BoQ information |
| 97 | Dismantling loose concrete cover of RCC coloums, beams slabs, Chajjas, and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including dusting of steel reinforcement, providing fabric mild steel wire mesh 75 mm x 75 mm of 2 mm dia as reinforcement to concrete surfaces, applying adhesive/admixture over steel mesh and providing 25 mm thick (average thickness) guniting mix (using 1 part of ordinary portland cement 53 grade and 2 parts of Badarpur sand mixed with adhesive/admixture at the rate as per manufacturers instruction or 2% by wt of cement all as directed with a pressure of 2 to 2.5 kgs per sqm by guniting machine and surfaces finished even and fair, including plaster in CM 1:4 of required thickness, to make proper Geographic shape as per site requirement, necessary padding, steel scaffolding and shuttering for working platformm/formwork etc complete all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender