Tender For Day To Day Maintenance Of Emergency Block Gmch Jammu For The Year 2026-27
Tender Value
4.74 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
6 days left
EMD
9480
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Maintenance Of Emergency Block Gmch Jammu For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 meters lead as per direction of Engineer incharge: 1:4:8 or leaner mix (i/c equivalent design mix) (Incl. carriages complete job) |
| 2 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead :Of area of 3 sqm. and below |
| 4 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead :Of area of 3 sqm. and below |
| 5 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 6 | Renewing glass panes, with putty and nails wherever necessary including raking out old putty : : |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: |
| 8 | 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 9 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 10 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 11 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 12 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for:Shelves (cast-in-situ) |
| 14 | Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 15 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Cold twisted bars |
| 17 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 18 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. |
| 19 | wall painig with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 21 | 15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand) |
| 22 | 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 coarse sand) |
| 23 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 24 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 25 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 1 mm thick |
| 26 | Providing and fixing PVC pipe including / jointing with seal ring (Finolex / Supreme) of pressure @ 4kg 110mm dia pipe |
| 27 | Providing and fixing PVC pipe including / jointing with seal ring (Finolex / Supreme) of pressure @ 5.5 kg/Cm2 |
| 28 | 110mm dia plain bend |
| 29 | 110mm dia door bend |
| 30 | 110mm dia door Tee |
| 31 | 110mm dia Tee junction |
| 32 | Providing and fixing PVC floor trap of Finolex / Supreme make |
| 33 | Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm |
| 34 | Providing and fixing white vitrous china pedestal type water closet (Hindware/Cera/Parryware make) (European type W.C Pan) with 100mm PVC P&S trap incl. cutting and making good the walls and floors wherever required |
| 35 | PVC connection for flushing cistern, wash basin, sinks etc |
| 36 | 450 mm long |
| 37 | 600 mm long |
| 38 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 39 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 40 | Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 |
| 41 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 42 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: |
| 43 | Semi rigid pipe 32 mm dia |
| 44 | Flexible pipe 32 mm dia |
| 45 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge |
| 46 | Providing and fixing aluminium fittings |
| 47 | handle 200mm |
| 48 | handle 150mm |
| 49 | tower bolt 150mm |
| 50 | tower bolt 100mm |
| 51 | hinges |
| 52 | Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick(minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips ofsize 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately).GI Metal Ceiling Lay in plain Tegular edge Global white colour tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. |
| 53 | Pviding and fixing PVC panelling in walls 8 to 10mm thick incl. all fittings and fixtures complete ( wall affair or any equilavent make) |
| 54 | Disposal of mulba uncluding loadind and unloading ll job complete |
| 55 | Engage Labour |
| 56 | Engage Plumber |
| 57 | Engage Welder with hire charges of welding set |
| 58 | Engage Sweeper |
| 59 | Engage carpenter 2nd Class |
| 60 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia.0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class deodar wood |
| 61 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete.With Galvanized M.S. Wire gauge with wire of dia 0.63 mm |
| 62 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 63 | For stutters of doors, windows and ventilators including providing and fixing hinges / pivots and m,aking provision for fixing of fittings whenever required including the cost of EPDM rubber / neoprene gasket required (fitting shall be paid for seprately.) Powder coated aluminium (minium thickness of powder coated 50 microns) |
| 64 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item. With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 65 | Providing and fixing ACP SHEET complete Job |
| 66 | Providing and laying double charge fullyVitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)Size of tile 600x600 mm |
| 67 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. 600x600 mm |
| 68 | Providing and laying Polished Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with whitecement slurry admixed with pigment of matching shade includingrubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, EliteBrown, Cat Eye or equivalent. |
| 69 | providing and fixing cup boards/Almirah frame and sutters with6 mm thick ply fixed over 19 mm thick ply of superior quality with decorative mica fixed on outer side of almirah of superior quality and plain mica of superior quality on inner side of almirah shutters complete including internal boxes/partitions with 19 mm thick ply of superior quality wherever required decorated with plain mica/enamel/emulsion complete wherever required including all fittings and fixtures as directed by Engineer-in-charge (complete job). |
| 70 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank of 1000ltr capacity |
| 71 | Providing and fixing 19mm thick water proof ply with all fixtures , fittings incl. leads lift carriages all job complete as per directions of engineer in charge{century/green |
| 72 | providing and fixing 6mm thick waterproof ply [century/green |
| 73 | providing and fixing wallnut/glossy mica with fevicol nails complete job: |
| 74 | Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 75 | P/F mesh size 50x50mm including strenghtening with 2mm dia wire or nuts bolts and washers as required complete job |
| 76 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: |
| 77 | Internal work-Exposed on wall 15 mm dia. nominal bore |
| 78 | 20 mm dia. nominal bore |
| 79 | 25 mm dia. nominal bore |
| 80 | 32 mm dia. nominal bore |
| 81 | 40 mm dia. nominal bore |
| 82 | 50 mm dia. nominal bore |
| 83 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work |
| 84 | 15 mm dia. nominal bore |
| 85 | 20 mm dia. nominal bore |
| 86 | 25 mm dia. nominal bore |
| 87 | 32 mm dia. nominal bore |
| 88 | 40 mm dia. nominal bore |
| 89 | 50 mm dia. nominal bore |
| 90 | providing and fixing roller blinds incl cost of fitting complete job |
| 91 | providing and fixing polycarbonate corrugated sheet complete job Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender