Tender For maintenance of electrical installation And Fans, Compound Lights, repair maintenance Pump Sets & Maintenance Of Air Conditioners, Lifts, Dg Set, Ro Unit, Water Coolers, Stp Plant And Other E & M Services At Rajokari Institute Of Technology
Tender Value
18.25 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
1 days left
EMD
36507
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance of electrical installation And Fans, Compound Lights, repair maintenance Pump Sets & Maintenance Of Air Conditioners, Lifts, Dg Set, Ro Unit, Water Coolers, Stp Plant And Other E & M Services At Rajokari Institute Of Technology, Rajokari Under Emd South West During 2026-27. (Sh : electrical installation Work, Maintenance Of Air Conditioner & Pump Etc.).
BOQ
| Sl. No. | Item Description |
| 1 | Sub-Head-1(Maintenance of EI)Maintenance of light points, fan points, exhaust fan point, call bell point, light plugs, power plugs, circuit wiring, street light and flood light i/c DBs main boards and other electrical installation in the building during the month except Sundays & Holidays by providing following staff and as per terms & conditions attached:Staffs: |
| 2 | Wireman - 1 No. (General Shift) (8 AM to 4 PM) |
| 3 | Khallasi- 1 No. (General Shift) (8 AM to 4 PM) |
| 4 | SH-II ( Maintenance of Air Conditioners)Comprehensive & Routine maintenance of 2.0/2.5/3.0 TR Cassate type AC unit i/c attending day to day complaints from 8 AM to 4 PM and rectify the defects, supplying and replacement of wornout parts such as starting / running capacitors, starting relays, overload relay, tharmostat, selector switches, sleeves, knobes, connector etc which reqd to be replace during routine maintenance and monthly cleaning of filters etc. (Replacement of compressor, condensor unit, cooling coil unit, blower, fan blower motor, front grill, man leads, gas charging etc not covered under routine maintenance) complete as per terms & conditons and Engineer-in-Charge. (17 Nos. Machine for 6 Month) |
| 5 | Supplying & replacement of 2.5 / 3.0 TR capacity compressor in the existing outdoor unit Cassette type AC unit i/c making connection testing commission etc complete as required. (Dismantle Material Retained by contractor) |
| 6 | Leakage repairing, making copper pipe connection, , N2 pressure testing and vacuming of cassette unit AC etc complete as reqd. |
| 7 | Supplying & charging of R-410 A gas in the exising Cassate type of 2 TR unit i/c pressure testing, flushing the system & gas charging complete etc as reqd. |
| 8 | Supplying & laying of following size copper flexible FRLS PVC insulated PVC sheathed copper conductor cable unarmoured for making connection complete etc as reqd. |
| 9 | 4C x 4 sq.mm |
| 10 | SH- III (Supply of material)Following material /electrical accessories shall be supply by agency and fixing will be done by the existing man power existing for replacement on day to day maitenance works etc as required. (Labour already included in Item No. 1 & 2 Sub Head - I.) |
| 11 | 5 Amp Modular Switch |
| 12 | 5 Amp Modular Socket |
| 13 | 15/16 Amp Modular Switch |
| 14 | 15/16 Amp Modular Socket |
| 15 | 6 to 32 Amp c Curve SP MCB, \\"C\\" curve, 10 kA breaking capacity |
| 16 | 6 amps. to 32 amps. ratings , DP MCB, “C” curve, 10 KA breaking capacity |
| 17 | 6 amps. to 32 amps. ratings , SPN MCB, “C” curve, 10 KA breaking capacity |
| 18 | 6 amps. to 32 amps. ratings , TP MCB, “C” curve, 10 KA breaking capacity |
| 19 | 3 mm thick phenolic laminated sheet i/c cutting of suitable size & fixing on existing switch board with fixing of all existing switch/socket/ Fan regulator. |
| 20 | 63 amps., 4 pole isolator |
| 21 | 100 amps., 4 pole isolator |
| 22 | 1.5 Sq.mm FRLS Copper wire |
| 23 | 4 Sq.mm ISI marked FRLS copper wire |
| 24 | 6 Sq.mm FRLS Copper wire |
| 25 | 2.50 mfd fan capacitor |
| 26 | 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM / Min (Minimum) BLDC Fan |
| 27 | 1400mm, service value ≥ 6.0 CM/Min/Watt, air delivery 245 CM/ Min (Minimum) BLDC Fan |
| 28 | 300 mm sweep heavy duty exhaust fans |
| 29 | 380 mm sweep heavy duty exhaust fans |
| 30 | Call bell/ buzzer, single phase |
| 31 | Stepped type Modular Fan regulator (2 module) |
| 32 | Modular base & cover plate for 3 module |
| 33 | Modular base & cover plate for 6 module |
| 34 | Modular base & cover plate for 8 module |
| 35 | Modular base & cover plate for 12 module |
| 36 | 3 pole MCCB, 100A, 16kA |
| 37 | 3 pole MCCB, 125A, 16kA |
| 38 | 3 pole MCCB, 400A, 35kA |
| 39 | 18 watt LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt ) of following body materials. |
| 40 | 36 watt LED Panel light 2x2 ft. (System lumen efficacy ≥105 <120 lm/Watt) of following body materials. CRCA Sheet Body (Thickness > 0.50 mm) |
| 41 | 36 watt LED Batten light (System lumen efficacy ≥105 <120 lm/Watt) of following body materials. CRCA Sheet Body (Thickness > 0.50 mm) |
| 42 | 100 watt LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥105 <120 lm/Watt) of following body materials. |
| 43 | SH- IV-Pump Supplying, Installation, Testing & Commissioning of Borewell submersible Pump set of following capacity suitable for working on 3 phase,415 volts A.C. supply 50 Hz i/c lowering in the sump well with the help of chain pulley block and tripod stand, connecting with existing delivering pipe lines, connections etc complete as reqd. |
| 44 | Head 320-40 mtrs., discharg 0-105 LPM, 7.5 HP |
| 45 | Lowering of 3/5/7.5/10 H.P. Submersible/ Mono-submersible pump/Sewage Submersible pump /sets in the underground tank or Borewell along with existing GI Pipe submersible cable etc. With the help of tri-port and chain pully block including P/F nub bolts, rubber packing, including testing, commissioning etc as required. |
| 46 | Mono-Submersible Pump Set/Dewatering Pump Set. |
| 47 | Lifting of 3/5/7.5/10 H.P. Submersible/ Mono-submersible pump/Sewage Submersible pump /sets from the underground tank or Borewell with the help of tri-port and chain pully block along with existing GI pipe and submersible cable etc complete as required. |
| 48 | Mono-Submersible Pump Set/Dewatering Pump Set. |
| 49 | Rewinding of 7.5/5 HP Submersible pump sets of following rating including cutting the burnt winding wire including rewinding the same with high quality motor resistance PVC Insulated copper winding the wire and credit of dismantled material i/c testing commissioning complete etc. as reqd. |
| 50 | 7.5/5 HP Sbmersible Pump |
| 51 | Providing and fixing of following 7.5/5 HP Submersible spare parts in the above motor i/c credit of old dismantled material etc as reqd. |
| 52 | Rematling of shaft and Turning & Polishing of Rotor sleeve- 1 job |
| 53 | G.M. Bush - 4 Nos. |
| 54 | Rematling of Impeller and duffuser with Neck ring- 12 Nos. |
| 55 | Oil/Water Seal- 2 Nos. |
| 56 | Flat Cable 3X2.5 Sq.mm- 5 Mtr. |
| 57 | Thrust plate and Thrust Bearing- 1Set |
| 58 | Supplying & fixing PVC insulated PVC sheathed copper conductor submersible flat cable ISI Marked in existing metal/ HDPE / PVC/ pipe/ in bore well/ in sump including fixing the cable to GI/HDPE pipe with suitable cable tags of following sizes etc. complete as required. |
| 59 | 3 Core 4.0 Sq mm Flat Cable |
| 60 | Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. |
| 61 | 50 mm dia. |
| 62 | Providing & fixing of 8mm dia (N/S) stainless steel rope PVC coated with existing GI pipe to hole the clamp etc as required. |
| 63 | Supplying and Replacement of gun metal gate valve ISI marked including fixing in the existing pipe line etc as required. |
| 64 | 50 mm dia. |
| 65 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required. |
| 66 | 50 mm dia. |
| 67 | SH- V (Credit for old dismantle material as and where basis etc as reqd) |
| 68 | Old assorted copper/aluminium wire |
| 69 | Old assorted 6/16 Amp Switch & sockets |
| 70 | Old assorted light fitting |
| 71 | Old assorted 1200/1400 mm Ceiling Fan |
| 72 | Old assorted Exhaust Fan |
| 73 | Old assorted MCB (5-32 Amp) |
| 74 | Old assorted DP/TP (63/100Amp) |
| 75 | Old assorted size Submersibel pump |
| 76 | Old assorted GI Pipe |
| 77 | Assorted size LED batten, 2x2 panel, downlighter Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender