Tender For special repair To Road From Nh-6 To Rengalbeda Ch 0/000 To 2/900 Km In The District Of Sambalpur For The Year 2026-27
Tender Value
44.23 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
1 days left
EMD
44238
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sambalpur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special repair To Road From Nh-6 To Rengalbeda Ch 0/000 To 2/900 Km In The District Of Sambalpur For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in all kinds of soil with 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and compaction with PRR including hire and running charges of PRR etc. complete as per specification and direction of the Engineer-in-charge. |
| 2 | Providing, laying, spreading and compacting graded stone agregate to wet mix macadam specification including premixing the materials with water at OMC in mechanical mix plant, carriage of mixed materials by tipper to site, laying in uniform thickness with paver in sub base/ base course on the prepared surface and compacting with vibratory roller to achieve the desired compaction as per Clause 406 of MoSRT&H Specifications for Road & Bridge works. |
| 3 | Clearing the existing black topped surface with removal of forein materials with brooms or soft brushes and finally dusting with old gunny bags and/ or compressed air to receive bituminious treatment etc. complete. |
| 4 | Providing and applying Tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm. on the prepared bituminious/ granular surface cleaned with mechanical brooms as per clause 503 of MORTH & H specification for road and bridge works ( 4rth Revision ) etc. complete as per the direction of the Engineering in charge. |
| 5 | Providing and laying Semi Dense Bituminious Concrete with batch type hot mix plant using crushed aggregates of specified grading , premixed with bitumininious binder of 60/70 penetration grade of bitumen , transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade , level and allignment , rolling with smooth wheeled , vibratory and tandom rollers to achieve the desired compaction as per clause 508 of MOSRT & H Specificaion for road and bridge works ( 4rth Revision ) etc. complete as per specification and direction of the Engineering in charge |
| 6 | White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scrapping etc., as per MORD technical specifications Clause 1915. |
| 7 | Reinforced cement concrete M15 grade kilometer stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical specification Clause 1703 of MORD. |
| 8 | Providing fixing 200 Mtr. Stone as per approved drawing & specification including cost of all materials, T&P, labour, painting, figuring & fixing etc., complete as per direction of the Engineer-in-charge. |
| 9 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 (i) 600mm Circular |
| 10 | (ii) 800 mm x 600 mm Rectrangle |
| 11 | (iii)600MM EQILATERAL & TRIANGLE |
| 12 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including Reflectorising glass beds @ 250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender