Housing Urban and Rular Development Government Departments Closing in 8 days TDR #56439747

Tender For Development Of Playfield At Ganapora Langate.

Issued by Government Departments · Kupwara, Jammu and Kashmir
Tender Value
39.33 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
8 days left
EMD
78660
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Development Of Playfield At Ganapora Langate.

BOQ

Name of Work:- Development of Playfield at Ganapora Langate.
Sl. No. Item Description
1PART A (Steel Gate)
2Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of Soils
3Providing & laying of dry soling, hand packed, incl sand filling in voids in foundation including all leads , lifts and carriage head load etc upto site of work complete job.
4Providing and laying in position cement concrete of specified grade excluding the cost of Centering and shuttering all work up to plinth level 1:4:8 (1 cement: 4 course sand: 8 grade stone aggregate 20 mm nominal size(quarry) including all leads, lifts and carriage of material up to site of work)
5Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
6Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.
7Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc
8Reinforcement for RCC work including straigtening, cutting,bending,binding and placing all complete cold twisted bars of TMT( Thermo-Mechanically Treated bars of grade Fe-500D or more).Steel in positon. lincl carriage of all materials involved complete job.
9Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete.
10Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
11PART B (Pavillion Stand)
12Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of Soils
13Supply & laying of dry stone soling including hand packing and ramming including all leads lifts cost & carriages of materials involved upto site of work complete
14Providing & laying in position specified grade of cement concrete, including the cost of centering, shuttering, finishing. All work up to plinth level in 1: 4: 8 (1 cement: 4 coarse sand: 8 graded stone aggregate) 40mm nominal size Crushed, including all leds, lifts cost & carriages of materials upto site fo work complete.
15Providing & laying in position specified grade of cement concrete, including the cost of centering, shuttering, finishing. All work up to plinth level in 1: 3: 6 (1 cement: 3 coarse sand: 6 graded stone aggregate) 20mm nominal size Crushed, including all leds, lifts cost & carriages of materials upto site fo work complete.
16Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete.
17Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
18P/F of CGI sheets colour coated tile profile 0.50mm thick incl. all carriages complete job
19PART C (Change Room cum Toilet)
20Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of Soils
21P/L of dry stone soling duly hand packed including all carriages loading unloading complete job before laying of mud mate in trenches incl. all carriages of material involved & head load.
22P/L in position cement concrete of specified grade excl. the cost of centering and shuttering: 1:4:8 (1 cement 4: coarse sand 8 graded stone crushed agg.40mm nominal size). Incl all carraiges of material involved.
23Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 150, landings, balconies, shelnes, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases upto floor V level excluding cost of centering, shuttering, finishing and reinforcement with (M-20 Mix) 1:1.5:3 (1 Cement: 1.5 Coarse Sand: 3 graded stone aggregate 20mm nominal size- crushed.) Incl all carraiges of material involved.
24Raft, Plinth Band
25Slab, Lintel
26Providing/laying in position specified grade excluding the cost of centering & shuttering . (M-10 Mix) 1:3:6 (1 Cement: 3 Coarse Sand: 6 graded stone aggregate 20mm nominal size- crushed.) Incl all carraiges of material involved.
27Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete.
28Raft, Plinth Band, U/G, A/G, Steps
29Slab, Lintel
30Supply and filling of RBM under floors incl. water compacting and dressing all leads, lifts and carriage complete
31Reinforcement for RCC works including straightening cutting bending placing in position and binding all complete (Thermomechanically Treated Bars) Incl. carraige
32Brick work with FPS bricks of class designation 7.5 in foundation and plinth in cement mortar in 1:6 mix incl carraige of bricks upto site of work complete including extra upto floor v level including carraige and head load
33Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs of with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) KD wood.
34Providing and Fixing of vetrified floor tiles of required size and pattern 12mm thickness of approved make in all colours and shades laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) incl. grouting the jointing wiht white cement and matching pigments etc. complete
35Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with epoxy of approved shade, complete. Incl. all carriage complete job.
3612mm thick cement plaster on the rough side of single or half brick walls of mix 1:6 ( 1 cement :6 coarse sand)
3750mm cement concrete flooring in 1:2:4 (1 cement: 2coarse sand: 4 graded stone agg., 20mm nominal size finished with a floating coat of neat cement slurry all inclusive leads, lifts, loading, un-loading, head load, cost and carriage of materials from approved nearest sources to site of work complete.
38Providing and Placing on terrace polyethylene water storage tanks ISI 12701 marked indicating the BIS license no with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support
39Providing and fixing 03 Layer P.P.R. pipes SDR 7.4UV Staplised and antimicrobial fusion welded having thermal stability for hot and cold water complete with PPR. fittings and clamps , including cutting and making good the walls etc of 15mm to20MM medium.
40Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) \\"manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.
41Providing and fixing soil waste, vent pipes 100mm including tees bends all complete job
42Providing and fixing soil waste, vent pipes 75mm including bends all complete job
43Providing and fixing CI bib cocks 15 mm of approved make and desire
44Providing and fixing panelled or panelled and glazed shutters for doors, windows and celerestory windows including ISI mark black enamelled butt hinges with necessary screws incl panelling of door shutters and glazing of windows 35mm to 40 mm thick 2nd class kail wood thick including
45Painting with synthetic enamel paint two or more coats on wood work of approved brand and manufacture to give an even shade on wood work including a coat of primer
46Finishing of walls with waterproof excel of approved brand and manufacture of required colour two or more coats on walls to give an even shade.
47Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete
48Painting with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture
49Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 150x10 mm
50Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125mm
51Providing and fixing bright finished brass door latch with necessary screws etc. complete. : 250x16x5 mm
52P/F 15mm nominal bore CP brass angle valve for basin mixer and geyser points of approved make conforming to IS 1893
53providing and fixing of 100 mm sand cast iron grating for gully trap
54Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
55Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore
56Structural steel welded in built up sections in trusses rafrters purlis eaves chajja etc including welding cutting and a coat of primer all compplete job
57Providing ridges or hips of width 60cm overall width plain G.S sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I limpet and Bitumen washer complete 0.63mm thick with zinc coating
58Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2
59Supply and fixing of PVC rigid conduits
6025mm dia rigid conduits
61Fan point
62Lighting points
63PART D (Chain Link Fencing)
64Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of Soils
65Providing & laying of dry soling, hand packed, incl sand filling in voids in foundation including all leads , lifts and carriage head load etc upto site of work complete job.
66Providing and laying in position cement concrete of specified grade excluding the cost of Centering and shuttering all work up to plinth level 1:4:8 (1 cement: 4 course sand: 8 grade stone aggregate 20 mm nominal size(quarry) including all leads, lifts and carriage of material up to site of work)
67Providing and laying in position cement concrete of specified grade excluding the cost of Centering and shuttering all work up to plinth level 1:3:6 (1 cement: 3 course sand: 6 grade stone aggregate 20 mm nominal size(quarry) including all leads, lifts and carriage of material up to site of work)
68Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.
69Providing and laying of 12 mm thick Plaster in 1:4 mix on inner and outer walls lincl carriage of all materials involved etc complete job.
70Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
71Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm
72labour charges for constructing/fixing of available RR Stone Masonary wall
73Labour charges for Repairing of Available Fencing
74Providing and supplying 1.5 tonne manual pitch roller of approved brand and quality or as directed by engineer-in-charge
75Providing and supplying Cricketing pitch mat of approved brand and quality or as directed by engineer-in-charge
76Providing and supplying a pair of movable goal posts of approved brand and quality or as directed by engineer-in-charge
77PART E (Septic Tank)
78Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of Soils
79Providing and laying stone Soling including Carriage upto the site of work
80Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
81Brick work with FPS bricks of class designation 7.5 in foundation and plinth in cement mortar in 1:6 mix incl carraige of bricks upto site of work complete including extra upto floor v level including carraige and head load
82Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
83Centering and shuttering including strutting, propping etc. and removal of form for
84Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level:Thermo-Mechanically Treated bars of grade Fe-500D or more.
85Supplying and fixing C.I. cover without frame for manholes: 455x610mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg.
8612mm thick cement plaster on the rough side of single or half brick walls of mix 1:6 ( 1 cement :6 coarse sand)
8750mm cement concrete flooring in 1:2:4 (1 cement: 2coarse sand: 4 graded stone agg., 20mm nominal size finished with a floating coat of neat cement slurry all inclusive leads, lifts, loading, un-loading, head load, cost and carriage of materials from approved nearest sources to site of work complete.
88PART F (Soakage Pit)
89Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of Soils
90Dry random rubble masonry with hard stone in foundation and plinth: without Bond stone
91Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
92Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns etc.
93Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level:Thermo-Mechanically Treated bars of grade Fe-500D or more.
94Supplying and fixing C.I. cover without frame for manholes:455x610mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56439747
AUTHORITY Government Departments
TENDER VALUE 39.33 Lakhs
LAST DATE 21-07-2026
Authority
Authority Name Public Works Department
Work Description Tender for Development Of Playfield At Ganapora Langate.
Basic Detail
Tender No 16/1327-36/2026-27/RnB/Langate Dated 13/07/2026
Bidding Type Tender
Location
City Kupwara
State Jammu and Kashmir
Key Dates
Publish Date 13 Jul 2026
Submission Date 21 Jul 2026
Open Date 22 Jul 2026
Finance
Tender Value 39.33 Lakhs
Tender Fee 1100
EMD 78660
Exemption Not Available
Document List
7002d4c2-5eae-4179-8018-d54f00c8fc2d.html
BOQ_1026286.xls
Tendernotice_1 (10).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 13, 2026
11:30 IST

Tender Published

Tender notice published.

Today
Jul 21, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Jul 22, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

7002d4c2-5eae-4179-8018-d54f00c8fc2d.html

xls

BOQ_1026286.xls

pdf

Tendernotice_1 (10).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders