Tender For Upgradation Renovation Of Tourist Guest House And Pc Block At Laach Langate Handwara.
Tender Value
15.96 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
7 days left
EMD
31920
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Renovation Of Tourist Guest House And Pc Block At Laach Langate Handwara.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling/Refixing/cleaning/Removal of soffit/Repairing of gazebo truss /scraping of walls/ floor for tiling etc/storing of items like Roofings,Wooden railing and concrete upto lead of 50m etc complete job |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 2.9.1 All kinds of soil : |
| 3 | P/L dry Stone Soling duly hand packed & consolidated with hand rammers incl.all carriage complete Job. |
| 4 | P/L in position cement concrete incl. all carraiges 1:4:8 mix using 40mm thick crushed stone aggregate. |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:nominal 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 6 | P/L in position cement concrete 1:2:4 mix using 20mm size crushed stone aggregate incl. carriages. |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 9 | Foundations, footings, bases of columns etc. for mass concrete. |
| 10 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 11 | 12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand) |
| 12 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete:2 mm thick |
| 13 | Wall Painting with acrylic emulsion paint of approved brand andmanufacture to give an even shade. Two or more coats on new work |
| 14 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing and moulding etc. all complete as specified and as directed by the Engineer-in-Charge: Polished Granite stone slab jet Black, Cherry Red, EliteBrown, Cat Eye or equivalent. |
| 15 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados including pointing in white cement mixed with pigment of matching shade complete. (Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (water based) conforming toIS:15477, in average 3mm thickness ) |
| 16 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, including grouting of joints.11.54.2 Size of tile 600x600 mm |
| 17 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. complete job. |
| 18 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 19 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 20 | Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931,(like jaguar ) |
| 21 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 22 | Providing and fixing 15 mm nominal bore C.P. brass basin mixer of approved make conforming to IS : 8931(like jaguar) |
| 23 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device , with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 24 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. (Brands like Kohler,jaguar) |
| 25 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. per liter capacity. |
| 26 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) |
| 27 | 20 mm nominal bore |
| 28 | 25 mm nominal bore |
| 29 | Providing and fixing PVC pipes of approved make ( B grade pipe of prince make or phnolex made) incl clamping etc all complete. |
| 30 | 100mm dia(incl collars and bends) |
| 31 | 75mm dia(incl collars and bends) |
| 32 | Door junction 100xx100x100 mm |
| 33 | Door junction 75x75x75mm |
| 34 | Floor trap 75mm |
| 35 | Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete |
| 36 | Construction of Brick Masionary main holes chambers 450mmx450mm deep including cover at top including all leads lifts cost & carriages of materials involved upto site of work complete |
| 37 | Supply / fixing and commissioning of electric items incl. MCB,PVC pipes/PVC channels in walls/ceiling of required dia,deep junction boxes, deep fan box, multistraund wires of required thickness and length, its fixtures, LED lamps, fan, switchs complete job in all respects. |
| 38 | lighting points |
| 39 | Heating points |
| 40 | fan point |
| 41 | Exhaust fan |
| 42 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board,610x510mm bowl depth 200mm |
| 43 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing,Oval shape 450x350mm (outer dimensions) |
| 44 | Providing and fixing toilet paper holder ,C.P. brass |
| 45 | Providing and fixing 100 mm sand cast iron grating for gully trap. |
| 46 | Providing and fixing 15 mm chrome-plated brass health faucet complete with all accessories, connections, and fittings as required (brands like hindware or jaguar) |
| 47 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106gms. |
| 48 | Providing and fixing countertop/wall-hung wash basin of approved make and size with vanity cabinet, CP mixer(like jaguar) ,waste coupling, bottle trap, angle cocks, flexible hoses, mirror, all accessories, water supply and waste pipe connections, including all labor, materials, tools, testing and commissioning, complete in all respects. |
| 49 | Providing and fixing 4mm thick glass panes in door/window frames with kail wooden beeding incl cost of wooden jaffri/mesh design nails etc complete job. |
| 50 | Providing and fixing 30mm glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges/pair of tower bolts/handles etc bright finished of required size with necessary screws: Second class Kail wood |
| 51 | Providing and fixing 30mm wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges/tower bolts/handles etc bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood |
| 52 | Providing and fixing factory-finished HDHMR (High Density High Moisture Resistant) door shutter of approved make, comprising HDHMR board of required thickness, edge-banded and finished with laminate/veneer /necessary DECO-painting /carvings on both faces, including necessary adhesives, hardware preparations, fittings(except latch and lock ), and all accessories complete as per drawings and specifications. |
| 53 | Providing and fixing bright finished brass 100 mm mortice latch with one deadbolt and a pair of lever handles of approved quality with necessary screws etc.complete. (Brands like Godrej) |
| 54 | Providing and fixing 12mm thick plyboard(water proof/marine plyboard including frame work ) for walls/ceilings /soffits in tile pattern in grooves including cost of nails & screws beading wherever necessary. |
| 55 | Providing and fixing of char Gul KHATAM BANDI ceiling of first class budloo/firwood excluding the cost of frame work which is to be paid separately.(including all fittings like beedings,cornices and polishing with two or more coats of French spirit polish with necessary fillers etc complete job) |
| 56 | Providing and fixing panelling Rait wood 12 mm thick (brick pattern for lower and upper beds and panneling tiles mid wall,ceiling in stepped pattern as suggested by engineer incharge)with skirting chair rails, and cornice with necessary screws, priming coat on unexposed surface etc., complete. Including superior quality spirit polish two or more coats to give an even shade . |
| 57 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work (incl scraping with sandpaper and priming complete job) |
| 58 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work/old work (including scraping with sandpaper and priming complete job) |
| 59 | Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete- welded(including painting) |
| 60 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with nuts, bolts and washers as required complete as per the direction of Engineerin charge Made of wire of dia 4 mm including two or more coats of Priming and painting all carriages (C.J.) Complete Job.(incl painting ) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender