Tender For Repair/Maint Of Fencing At Installation Sub Station And Ac Plants At Afs Amla.
Tender Value
15 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
12 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Betul → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Fencing At Installation Sub Station And Ac Plants At Afs Amla.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as specified and directed. |
| 2 | M&L for brickwork with fly ash brick 75 kg/cmsq compressive strength old size, straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 3 | All as per item No 2 above but except brick complete all as specified and directed.Note: All type of bricks retrieved from item No 1 will be used. |
| 4 | Taking down cement plaster on brick wall including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 5 | M&L for rendering 15mm thick cement plaster, (10 mm thick backing coat in CM 1:6 and 5 mm thick in CM 1:4) on fair faces of brickwork or concrete surface complete all as specified and directed. |
| 6 | M & L 10mm thick rendering in cement mortar 1:4 on fair faces of brick wall finished even and smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk white primer complete all as specified and directed. |
| 8 | M&L for preparing newly plastered surfaces of walls and applying two coat of weather shield/weather proof acrylic exterior emulsion paint (Apex Ultima Luxury emulsion of asian or equivalent of approved make by GE by skiled labour and applying one coat of acrylic water based exterior grade primer @ 0.8 ltr (undiluted)/10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless soray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI or using smart periodical methodology complete all as specified and directed. Note: Shade and pattern of the colour will be approved by GE. |
| 9 | Material & labour for applying one coat of interior emulsion paint on wall by roller after preparation of old surface by washing, rubbing down and stopping of distempered and painted surfaces including crack filled with wall care putty complete all as specified and directed. |
| 10 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 11 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 12 | Demolition of plain cement concrete as in ground floor and paving not exceeding 15 cm thickness below or above ground level (unreinforced concrete) including disposing of debris off the premises complete all as specified and directed. |
| 13 | M&L for 100 mm thick; Plain Cement Concrete (PCC) 1:2:4 Type B-2 (using 40mm graded stone aggregate), as in top layer of the floor, pavings etc., including finishing the surface by spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed. |
| 14 | M&L for 75 mm thick; PCC 1:3:6 type C2 (using 40mm graded stone aggregate), as in plinth protection, including finishing the surface by spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green and making saucer drain complete all as specified and directed. |
| 15 | M&L for forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade A complete all as specified and directed. |
| 16 | Dismantling of Asbestos cement (corrugated or semi corrugated) sheets as in roof covering complete all as specified and directed. |
| 17 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength 550 Mpa as in roof covering /cladding to wall /roof covering fixed with self tapping screw as complete all as specified and directed. |
| 18 | S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed |
| 19 | M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base 75mm thick, finished fair & even complete all as specified and directed. |
| 20 | M&L for yellow/ Red colour pre-polished rubber moulded chequred cement concrete tile 300mm x 300mm x 20-22mm thick with anti skid properties set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 21 | M&L for preparation of new steel surfaces of any description ,over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of redoxide priming complete all as specified & directed. |
| 22 | Material and labour for preparation of old treated surfaces of steel of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed. |
| 23 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 24 | Dismantling fencing wire mesh,any type complete all as specified and directed |
| 25 | Supply only chain link MS galvanised fencing of size 4\\" x 4\\" and dia of wire 4mm or any size or type complete all as specified and directed. |
| 26 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, tightening complete all as specified and directed. |
| 27 | S&F in repair Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed |
| 28 | S&Fin repair Mild steel screw bolts (machine made) 11mm to 15mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends and screwed other end or screed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but exc 10 cm but n.exc 15 cm long.complete all as specified and directed. |
| 29 | Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender