Tender For Construction Of Compound Wall Fencing (Length = 276.00 Meter) Including A Main Gate And A Security Post For The New Type-Iii & Iv Residential Quarter Complex At Rims, Imphal.
Tender Value
94.75 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
4 days left
EMD
1.89 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Imphal West → Manipur
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Compound Wall Fencing (Length = 276.00 Meter) Including A Main Gate And A Security Post For The New Type-Iii & Iv Residential Quarter Complex At Rims, Imphal.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil. |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 4 | Dry rubble Flooring |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - -All work upto plinth level: |
| 6 | i) 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 7 | ii) 1:1.5:3 (1 cem :1.5 c/sand :3 graded stone aggregate 20 mm nom size) |
| 8 | P/L in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level: |
| 9 | 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement : |
| 11 | 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases upto floor two level excluding the cost of centering, shuttering, finishing and re-inforcement. |
| 13 | 1:1.5:3 ( 1 cem : 1.5 c/sand : 3 graded stone aggregate 20 mm nom size ) |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 15 | a) Foundations, footings, bases of columns etc. and mass concrete |
| 16 | b) Lintels, beams, plinth beams, girders, bressumers and cantilevers, with water proof ply 12mm thick. |
| 17 | c) Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 18 | d) Suspended floors, roofs, landings, balconies andaccess, platform, with water proof ply 12mm thick. |
| 19 | Reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete upto and above plinth level |
| 20 | Thermo-Mechanically Treated bars |
| 21 | Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in |
| 22 | Cement mortar 1 : 3 (1 cement : 3 coarse sand) |
| 23 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required. |
| 24 | In grating, frames, guard bar, railing, brackets, gates and similar works. |
| 25 | Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS :15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement: 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete. |
| 26 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :-15622 (thickness to be specified by the manufacture of approved make in all colours; shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with-grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 27 | 12 mm cement plaster of mix: |
| 28 | 1:4(1 cem:4 fine sand) |
| 29 | 15 mm cement plaster on single or half brick wall of mix: |
| 30 | 1:4(1 cem:4 fine sand) |
| 31 | Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 32 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 33 | a) With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 34 | b) With ready mixed red oxide zinc chromate on steel/iron works having VOC content less than 250grams/litre |
| 35 | Finishing walls with Acrylic Smooth exterior paint of required shade : — |
| 36 | New work (Two or more coat applied @ 1.43 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). |
| 37 | Painting with synthetic enamel paint of approved brand and manufacture of required coulur to give an even shade: |
| 38 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 39 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 40 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings wjth one Step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 41 | Concealed work, including cutting chases and making good the wall etc. |
| 42 | 20 mm nominal outer dia Pipes |
| 43 | 25 mm nominal outer dia Pipes |
| 44 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stabijity for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with One step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 45 | External work |
| 46 | 32 mm nominal outer dia Pipes |
| 47 | Providing and fixing white vitreous, china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.l. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: |
| 48 | W.C. pan with ISI marked white solid plastic seat and lid. |
| 49 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fitting and brackets, cutting and making good the walls wherever required:- |
| 50 | (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass |
| 51 | Providing and fixing white vitreous china- pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 52 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 53 | Rectangular shape 1500x450 mm |
| 54 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 55 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing, not less than 190 gms. |
| 56 | Providing and fixing toilet paper, holder: |
| 57 | C.P. brass |
| 58 | Supplying and installation of PVC septic tank of approved quality including cost of laying, fittings and fixtures complete |
| 59 | 2000 ltrs |
| 60 | Providing and fixing aluminium work for doors, windows, ventilators and partitionswith extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass /stainless steelscrews, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately): |
| 61 | ii) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 62 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 63 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 64 | With float glass panes of 5.50 mm thickness |
| 65 | 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade -1, medium density flat pressed, three layer particle board FPT- I or graded wood particle board FPT- I, conforming to IS : 3087, bonded with BWP type synthetic resin adhesive as per IS : 848 and pre-laminated conforming to IS :12823, Grade 1, Type -II marked: |
| 66 | Providing and fixing Aluminium sliding bolts bright finished or black enamelled with nuts & screws etc. complete. |
| 67 | i)300 x 16 mm |
| 68 | Providing & fixing Aluminium handles with necessary screws etc. complete. |
| 69 | i) 125 mm |
| 70 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessaryscrews etc. complete: |
| 71 | 300x10 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender