Tender For Repair And Improvement Works At Type Iii Quaarters In Voc Port
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Aug 2026
7 days left
EMD
8.45 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tuticorin → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Improvement Works At Type Iii Quaarters In Voc Port
BOQ
| Sl. No. | Item Description |
| 1 | Taking out doors, wondows and ventilators etc., (wood or steel) shutters including chowkhats, architraves, holdfasts and other attachments and stacking them within a lead of 100m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers. |
| 2 | Dismantling and removal of Brick Masonry work (BW) in Cement Mortar above G.L. upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within a lead of 100 m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers. |
| 3 | Dismantling and removal of Reinforced Cement Concrete (RCC) above G.L. upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within a lead of 100 m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers. |
| 4 | Brick work in Cement Mortar 1:5 (M. Sand (Crushed Stone Sand)) (One cement, five M. Sand (Crushed Stone Sand)) using chamber burnt bricks for walls in all floors up to floor two level of the building including cost of all materials, labour, curing etc.,complete complying with AISS and as directed by the departmental officers. |
| 5 | Providing Half Brick Masonry wall using chamber burnt bricks in Cement Mortar 1:3 (M. Sand (Crushed Stone Sand)) (One cement, three M. Sand (Crushed Stone Sand)) for Partition walls etc., in all floors including cost of all materials, labour, scaffolding, etc., complete complying with AISS and as directed by the departmental officers. |
| 6 | Fabricating and placing in position of M.S / Tor steel grills for R.C.C works in all floors including cost of Steel, cutting, bending, binding with 16 Gauge GI Binding wire and placing in position etc., complete complying with AISS and as directed by the departmental officers. |
| 7 | Providing Form work for Sides of soffits, beams, landings, cantilever ridges and lintels not exceeding 1 m in depth in all floors upto full height of the building and removal of the same for in situ RCC work etc., complete complying with AISS and as directed by the departmental officers. |
| 8 | Providing and laying Reinforced Cement Concrete 1:1.5:3 (One part of cement, One and a half parts of M. Sand (Crushed Stone Sand) & Three Parts of graded stone aggregate (i.e.) 2 parts of 20mm nominal size graded metal & 1 part of 10mm nominal size graded metal) using 20 mm nominal size graded metal including mixing, laying, levelling, consolidation, finishing and curing etc., and excluding the cost of form work and reinforcement grills for all RCC works in all floors upto full height of the building etc., complete complying with AISS and as directed by the departmental officers. |
| 9 | Providing and fixing M.S.Round or Square bars with M.S. Flats at required spacings in wooden frames of windows and clerestory windows in all floors including cost of M.S. Round or Square bars, M.S. Flats and labour for finishing and applying one coat ofready mixed red oxide primer of approved quality etc., complete complying with AISS and as directed by the departmental officers. |
| 10 | Supplying and fixing UPVC WINDOWS( Un-Plasticized Polyvinyl Chloride) windows of casement type (open) from the profile the size of outer frame 60mm X 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles aremulti chambered sections with wall thick of 2mm.The EPDM rubber (black colour) covered with overall the edges of frame and shutter. The shutter will be provided with Espag multi power point locks and also it operates ashandle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work. The rate including cost of all materials, labour, tools & plants, conveyance, fixing in position etc., complete and as directed by the departmental officers. |
| 11 | Providing and fixing in Cement Mortar 1:3 (M. Sand (Crushed Stone Sand)), 6 mm thick of 30 x 30 cm wall tiles over the existing wall up to 2.50 m height by chipping the wall surfaces wherever required and fixing with approved colour and quality of tilesincluding all materials, labour, equipments etc., complete complying with AISS and as directed by the departmental officers. |
| 12 | Providing and laying approved colour and quality of Ceramic floor tiles 30 x 30 cm in Cement Mortar 1:4 (M. Sand (Crushed Stone Sand)), 12 mm thick. The rate inclusive of cost of tiles, all materials, labour, white cement,conveyance etc., complete complying with AISS and as directed by the departmental officers. |
| 13 | Providing and laying approved colour and quality of Stain Free Nano Polish Vitrified Tiles 600 x 600 x 8mm in Cement Mortar 1:4 (M. Sand (Crushed Stone Sand)), 20 mm thick. The rate inclusive of cost of tiles, all materials, labour, white cement, conveyance etc., complete complying with AISS and as directed by the departmental officers. |
| 14 | Providing and fixing granite slabs (jet black) of 20mm thick (super fine polished with nosing edges) on the steps area of building, in between urinals and wherever required in Cement Mortar 1:4 (M. Sand (Crushed Stone Sand)). The rate inclusive of costof granite slab, chemical component, white cement, labour charges & conveyance etc., complete and as directed by the departmental officers. |
| 15 | Providing and laying approved quality of Cuddapah stone of size 25mm thick over the brick wall and wherever required. The rate inclusive of cost of Cuddapah slab, all materials, labour charges & conveyance etc., complete and as directed by the departmental officers. |
| 16 | Plastering the Brick work 15 mm thick in Cement Mortar 1:3 (Plastering Sand (P-Sand)) (One cement, three Plastering Sand (P-Sand)) for all faces of walls (even and uneven) in all floors upto full height of the building including necessary scaffolding, racking of masonry joints, cleaning, curing etc., complete complying with AISS and as directed by the departmental officers. |
| 17 | Supplying and fixing 25mm dia. PVC pipe 10 kg. per cm2 working pressure in wall, ceiling and floor with necessary clamps and screws, making holes in the wall wherever necessary by drilling holes in the roofs and walls, packed the holes with necessary brick works or concrete wherever necessary plastering the surface smooth with required scaffolding including cost of pipe and special such as elbows, tee, union joints, reducer etc., cutting threading etc., complete complying with AISS and as directed by the departmental officers. |
| 18 | Supplying and fixing in position of best Indian make chinnaware water closet of European type (White) of double trap syphonic with fibre cover including all fittings and necessary lead pipe jointing the trap with C.I. pipe, the pipe connection being embedded below floor level in brick jelly concrete in lime mortar 1:2 including cost of fittings of low level flushing cistern with syphonic fitting tank of 12.5 litre capacity with inlet and over flow at bottom and connecting it with water supply pipe line and painting the pipe line with two coats of paint approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 19 | Supplying and fixing in position of Brass Chromium Plated Shower Rose - 100mm dia. including all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 20 | Supplying and fixing in position of 600 x 450 mm size Mirror of best make, first quality approved by the department including plywood back, plugs, screws etc., complete complying with AISS and as directed by the departmental officers. |
| 21 | Supplying and fixing in position Brass Chromium Plated Soap Tray of size 150mm x 100mm first quality approved by the department including plugs, screws, all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 22 | Supplying and fixing in position of Brass Chromium Plated Towel Rail 60cm long and 20mm dia. with Brackets first quality approved by the department including plugs, screws, all materials, labour etc.,complete complying with AISS and as directed by the departmental officers. |
| 23 | Supplying and fixing in position Stainless Steel Health Faucet first quality approved by the department including plugs, screws, all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 24 | Supplying and fixing in position of 100mm inlet and 75mm OD outlet PVC floor Nahini Trap of self cleaning design including necessary cement mortar should be provided wherever if required with necessary cement concrete 1:2:4 for embedding, curing, finishing including all materials, labour charges, & conveyance etc., complete and as directed by the departmental officers. |
| 25 | Supplying and fixing in position of Wooden panelled door single shutter including cost of hold fasts and applying one coat of wood primer of approved quality, fixing of first quality ISI standard furniture fittings with screws / bolt & nuts, the rate shall include cost of wood, labour for wrought and put up, etc., complete complying with AISS and as directed by the departmental officers. |
| 26 | Supplying and fixing in position wooden Ventilator of various size in all floor with hard kongu wood frames as per drawing including cost of hold fasts and applying one coat of wood primer of approved quality and including cost and fixing of first quality ISI standard furniture fittings with screws / bolt & nut, the rate shall include cost of wood, labour for wrought and putup, pin head 3mm thick pressed glass, furniture fittings, primer etc., complete complying with AISS and as directed by the departmental officers. |
| 27 | Supplying and fixing in position of chinnaware Wash Basin (White color) 550 mm x 400mm size with pedestal of approved quality with necessary fittings such as cast iron bracket, 1 no 15mm C.P heavy duty piller tap with pentagonal head, 32mm dia PVC wastewater pipe and 15mm dia nylon connection, 1 No 15 mm dia G.M. wheel valve and fixing it with the wall with necessary plugs, clamps and screws, and giving water supply connection and painting the exposed pipe connection with two coats of paint of approved colour, including all labour, materials etc., complete complying with AISS and as directed by the departmental officers. |
| 28 | Supplying and fixing in position of best Indian make heavy duty Gun Metal Gate Valve at 25mm dia. of approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 29 | Supplying and fixing in position of best Indian make heavy duty Gun Metal Gate Valve at 32mm dia. of approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 30 | Supplying and laying in trenches 110 mm dia. PVC inflow pipe line 6 Kg./CM2 with necessary pipe specials such as elbow, tee, union joint etc., and the joints being tightened including threading cost of pipe, specials etc., complete complying with AISS and as directed by the departmental officers. |
| 31 | Finishing the top of weathering course with one course of machine pressed tiles of size 23 cm X 23 cm X 2cm in Cement Mortar 1:3 including all materials, labour, etc., complete complying with AISS and as directed by the departmental officers. |
| 32 | Supplying and fixing 32mm dia. PVC pipe 10 kg. per cm2 working pressure in wall, ceiling and floor with necessary clamps and screws, making holes in the wall wherever necessary by drilling holes in the roofs and walls, packed the holes with necessary brick works or concrete wherever necessary plastering the surface smooth with required scaffolding including cost of pipe and special such as elbows, tee, union joints, reducer etc., cutting threading etc., complete complying with AISS and as directed by the departmental officers. |
| 33 | Supplying and fixing in position 15mm dia. SS Long lever water tap of approved quality including all materials, labour, fixing charges, etc., complete and as directed by the departmental officers. |
| 34 | Supplying and fixing of Stainless Steel sink using 304L Grade of size 600mm x 450mm x 200mm. with necessary fittings. The rate inclusive of Stainless Steel Sink, fabrication charges, conveyance charges, fixing charges, labour, necessary fittings Such as1 No. of 32mm dia. Waste Water pipe, 32mm dia. C.P. Waste Coupling etc., complete and as directed by the departmental officers. |
| 35 | Attending the repairs works in the existing door, window and ventilator with frame and shutters of various size at Residential Quarters using the available wooden planks / scantlings which will be issued by the department and same may be re-fixed at the original position. The cost inclusive of removing and re-fixing the existing door/window/ventilator with required fixtures, labour, tools & plants etc., complete and as directed by the departmental officers. |
| 36 | Applying Two coats of Synthetic Enamel paint (excluding priming coat) on New wood and wood based surfaces interior to give an even shade including cleaning of all dirt, dust and other foreign matter, sand papering and including cost of Synthetic EnamelPaint and labour charges etc., complete complying with AISS and as directed by the departmental officers. |
| 37 | Painting TWO coats with Plastic emulsion paint of approved brand and colour over New Wall surfaces including one coat of alkalin resistance primer of approved brand so as to give an even shade. Prior to applying the primer, the wall surfaces shall be thoroughly cleaned of all grease, dirt, loose pieces, scales and make the surface even by applying wall putty and make good of the surface with sand paper etc., The cost including preparing the surface, all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers. |
| 38 | Applying One coat of Alkali Resistant Primer and Two coats of APEX - Exterior Emulsion Paint of approved colour and quality over the New wall surface in all floors to give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand paperes smooth including all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers. |
| 39 | Supplying and fixing Solid Panel PVC door with frame - Supplying and fixing Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter etc., complete and as directed by the departmental officers. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender