Tender For Construction of Sub Divisonal Veterinary Hospital Building At Jeori In Tehsil R Ur Distt. Shimla H.P. (Sh:- Building Portion Including Site Development, Water Supply And Sanitary Installation)
Tender Value
55.50 Lakhs
Estimated cost
Bid Submission
19 Jul 2026
3 days left
EMD
1.11 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of Sub Divisonal Veterinary Hospital Building At Jeori In Tehsil R Ur Distt. Shimla H.P. (Sh:- Building Portion Including Site Development, Water Supply And Sanitary Installation)
BOQ
| Sl. No. | Item Description |
| 1 | Cutting in earth work in all heights and depths in all kinds of sil, including sturated soil comprising of pick work, jumper work and balsting work both in soft and hard rock with chiselling and wedging out of rocks (where blasting in probhited) and their intermediate classification of soils including, dewatering whereever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in-charge at site, according to the HPPWD specification 1990. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. All kinds of soil.including carriage of material through all modes of transportation with in all leads and lifts and as per direction of Engineer-in-charge |
| 3 | Filling in plinth with course sand under floor including, watering, ramming, consolidating and dressing complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of material through all modes of transportation with in all leads and lifts and as per direction of Engineer-in-charge |
| 4 | Providing and laying cement concrete 1:6:12 [One cement isto Six sand isto Twelve graded crushed hard stone aggregate 40 (Forty) millimeters nominal size] mechanically mixed and curing complete, excluding cost of form work in foundation and plinth, as per the direction of Engineer-in-Charge.and as per HP.PWD. Specification 1990 volume-I, including carriage of material through all modes of transportation with in all leads and lifts and as per direction of Engineer-in-charge |
| 5 | Providing form work with steel plates 3.15 (Three point One Five ) millimeters thick welded with angle iron in frame 30*30*5 (Thirty into Thirty into Five ) millimeters, so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden / steel battens and ballies in all heights of propping and centering below supporting floor to ceiling and removal of the same in-situ-reinforced concrete and plain concrete work as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I,including carriage of material through all modes of transportation with in all leads and lifts and as per direction of Engineer-in-chargeFoundation footings basis of columns etc. and mass concrete. |
| 6 | Beams, cantilever, girders and lintels:-sides and soffits of beams, beam haunchings cantilever, girders bressumers and lintels not exceeding 1 (one)meter in depth. |
| 7 | Columns pillars, posts and struts square rectangular or polygonal in plan. |
| 8 | Flat surfaces such as soffits of suspended floors roofs landings and the like floors etc. up to 200 mm (two hundred millimeter) in thickness. |
| 9 | Vertical surfaces such as walls(any thickness partitions and the like i/c attd. Buttresses, pilasters plinth and string courses and the like. |
| 10 | Stair cases with sloping or stepped soffits excluding landings. |
| 11 | Edges of slabs and breaks in floors and walls:-under 20 cm(twenty centimeter) wide. |
| 12 | Providing and laying cement concrete 1:1½:3 [ One cement isto One and half sand isto Three graded crushed hard stone aggregate 20 (Twenty) millimeters nominal size]mechanically mixed and vibrated and curing complete, excluding cost of form work and reinforcement for reinforced concrete work as per the entire satisfaction and direction of Engineer-in-Charge as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I,including carriage of material through all modes of transportation with in all leads and lifts and as per direction of Engineer-in-charge.Foundations, footings, basis of columns and the like and mass concrete |
| 13 | Column pillars post and struts up to floor all level. |
| 14 | Lintels, beams girders bressumers and cantilevers upto floor two level : |
| 15 | Suspended floors, roofs, landings, shelves and their supports balconies, beams, girders, bressumers and cantilevers up to floor all levels |
| 16 | Stair cases except spiral staircases excluding landing but including preparing of top surface and finishing of nosing up to floor all levels |
| 17 | Providing Tor Steel reinforcement for reinforced cement concrete work including bending binding and placing in position including cost of binding wire complete up to all floor levels/all heights Tor Steel/TMT. as per the entire satisfaction and direction of Engineer-in-Charge as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, iincluding carriage of material through all modes of transportation with in all leads and lifts and as per direction of Engineer-in-charge |
| 18 | Providing and laying cement concrete 1:2:4 (1 cement:2 Sand:4 crushed stone aggregate 20mm nominal size) and curing complete excluding cost of form work in Foundation and plinth including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 19 | Providing and laying upto all floor level reinforced cement concrete 1:1½:3 [ One cement isto One and half sand isto Three graded crushed hard stone aggregate 20 (Twenty) millimeters nominal size]mechanically mixed and vibrated to give a smooth and even surface including centring and shuttering etc. but excluding cost of reinforcement in :- Mouldings as in cornices windows sills etc. not exceeding 15cm(fifteen centimeter) in girth as per the entire satisfaction and direction of Engineer-in-Charge as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of material through all modes of transportation with in all leads and lifts and as per direction of Engineer-in-charge |
| 20 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:3:6 (1 cement : 3 coarse sand) : 6 graded stone aggregate 20mm nominal size) including carriage of material through all modes of transportation with in all leads and lifts and as per direction of Engineer-in-charge |
| 21 | Second class brick work using common burnt clay building bricks in super structure above plinth level in all floors up to all heights and levels in cement mortar 1:6(One cement isto Six sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 22 | Half brick masonry in 2nd (second) class common brunt clay building bricks in cement mortar 1:4 (1cement:4sand) in superstructure including carriage with in all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.up to floor all levels including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 23 | Boulder filling tightly hand packed under floor including watering, ramming, consolidating etc. complete incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 24 | Providing wood work in frames of doors,windows,clerestory windows and other frames wrought framed and fixed in posation with hold fast lugs or with dash fasteners of required dia & length (hold fast lungs or dash fastener shall be paid for separetely) including carriage of material through all modes of transportation with in all leads and lifts and as per direction of Engineer-in-charge |
| 25 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. (Note:- Butt hinges and necessary screws shall be paid separately) Deodar wood wood 35 mm thick shutters incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 26 | Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. 40 mm thick 2nd class deodar wood.incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 27 | Providing and fixing 19mm (nineteen millimeter) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 28 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 29 | Providing and fixing 1.00mm (one point zero millimeter) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 30 | Providing and fixing anodised aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other setions of approved make confirming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (minimum anodic coating of grade AC 15) fixed with rawl pluges and screws or with fixing clips, or with expansioin hold fastners including necessary filling up of gaps at junction, at top secton shall be smooth, straight, mitres and jointed mechanically where ever required including cleats angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screw as per Aechitectula drawings and as per HPPWD specifications of 1990 volume-I including carriage of materials, labour tool and plant through all modes of transportation withing all leads and lifts and as per direction of Engineer-in-charge. For frames of windows and ventilators and glazed partitions. |
| 31 | Providing and fixing anodised aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make confirming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (minimum anodic coating of grade AC 15) fixed with rawl pluges and screws or with fixing clips, or with expansioin hold fastners including necessary filling up of gaps at junctions, at top. section shall be smooth, straight, mitred and jointed mechanically where ever required including cleats angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws as per Architectural drawings and as per HPPWD specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation withing all leads and lifts and as per direction of Engineer-in -charge. For frames of windows and ventilators and glazed partitions. |
| 32 | Providing and fixing glazing with glass panes of 4mm (four milimere) thickness (weight not less than 10.00 kg/sqm.) iincluding carriage of material within all leads and lifts and as per direction of Engineer-in-Charge. |
| 33 | Providing and fixing 19mm(nineteen milimeter) thick commercial board water proof shutter for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge.. |
| 34 | Providing and fixing 1 mm (one milimetre) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc. complete, including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge.. |
| 35 | Providing and fixing powder coated aluminum sliding door bolts (Barrel type) anodized transparent or dyed to required colour and shade with bolts and nuts screws etc.completeincluding carriage of material within all leads and lifts and as per direction of Engineer-in-Charge. 300 x 16 mm (three hundred into sixteen millimeter). |
| 36 | 250 x 16 mm (two hundred fifty into sixteen millimeter). |
| 37 | Providing and fixing powder coated aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge.300 x 10 mm (Two hundred fifty into ten milimeter. |
| 38 | 250 x 10 mm (two hundred into ten millimeter) |
| 39 | 200 x 10 mm (one hundred fifty into ten millimeter) |
| 40 | 150 x 10 mm (one hundred into ten millimeter) |
| 41 | Providing and fixing powder coated aluminium handles anodized transparent or dyed to required colour or shade with necessary screws etc. complete including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge.125 mm (one hundred millimeter) |
| 42 | 100mm (seventy five milimeter). |
| 43 | 200mm(one hundred millimeter) |
| 44 | 150mm(one hundred millimeter) |
| 45 | Providing and fixing powder coated aluminium 100mm(one hundred milimeter) floor door stoper with rubber cushion screws etc. to suit shutter thickness complete including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge.. |
| 46 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge. |
| 47 | Providing and fixing over head hydraulic door closer of approved brand and manufacture (conforming to IS specification ISI marked) for door with screws complete including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge. |
| 48 | Providing and fixing 65x35mm(sixty five into thirty five milimeter) special quality bright finished brass cup board lock or wardrobe locks with six levers including necessary screws etc. complete including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge. |
| 49 | Providing and fixing 150mm (one hundred fifty milimeter) M.S. single acting spring hinges bright finished with necessary screws etc. complete. including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge. |
| 50 | Providing and fixing 150mm (one hundred fifty milimeter) M.S. double acting spring hinges bright finished with necessary screws etc. complete. including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge. |
| 51 | Providing and laying Ceramic glazed floor tiles of size 300x300x8 mm of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:3 (1 Cement : 3 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge. |
| 52 | Supplying and rooling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454-part-I and M.S. top cover of required thickness for rolling shutters, complete in all respect and as per direction and satisfication of Engineer-in-charge. |
| 53 | Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 20 mm thick. incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 54 | Providing and laying Kota stone slab (mirror polished) 25 mm (twenty five millimeter) thick in risers of steps,skirting dado and pillars laid on 12 mm (twelve millimeter) (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing completeincluding carriage of material within all leads and lifts and as per direction of Engineer-in-Charge. |
| 55 | Marble work gang saw cut (polished and machine cut) of thickness 20 mm for wall lining/Kit.top/flooring (veneer work), backing filled with a grout of average 20 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately).Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble./Baroda Green Marble/ Jaisalmare Marble incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 56 | Providing and laying Chequered tiles 22mm thick with graded marble chips of size upto 6mm in floors,jointed wit neat cement slurry mixed with pigmemt to match the shade of the tiles ,including rubbing and polishing complete on 20 mm thick bed of cement mortor 1:4 (1Cement ,4 sand) incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 57 | Providing and fixing 150mm(one hundred fifty milimeter) diameters pipe on wall face PVC (D-Plast)Rain water pipes of working pressure not less than 4.5kg/sqm.(four point five kilogramme per square meter including filling the joints with approved adhesive complete including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge. |
| 58 | PVC Plain bend 150mm (one hundred fifty millimeter) dia includingincluding carriage of material within all leads and lifts and as per direction of Engineer-in-Charge. |
| 59 | PVC shoe 150mm (one hundred fifty millimeter) dia including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge. |
| 60 | 150 mm I(one hundred fifty milimeter) dia PVC door Bend. |
| 61 | 150 mm I(one hundred fifty milimeter) dia PVC Collars.. |
| 62 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel angle sections of size 35x35x5mm, joints mitred and welded by angle iron 35x35x5mm or 35x5mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primar, all complete as per the directions of Engineer-in-charge. |
| 63 | Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size) incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 64 | Providing and fixing moulded hand rail of M.S. hollow pipe 50mm. dia welded in straight length over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be measured & paid separately) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 65 | Providing and fixing M.S. hollow pipe of approved size and section in vertical posts welded in straight length over M.S. flat at top of vertical balusters including one coat of red oxide priming coat completeasincluding carriage of material within all leads and lifts and as per direction of Engineer-in-Charge. |
| 66 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge. |
| 67 | Painting two coats (excluding priming coat on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all girt,dust and oher forgien matters Enamel white paint ,ncluding carriage of material within all leads and lifts and as per direction of Engineer-in-Charge. |
| 68 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 69 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour Two coats. incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 70 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 71 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 72 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture.Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 73 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture. incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 74 | 6mm thick cement plaster to ceiling in cement mortar 1:3 (1 cement :3 sand) upto all floor level including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge. |
| 75 | 15mm cement thick plaster in single coat on fair side of brick masonry/stone masonry/concrete walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (one cement: six sand) iincluding carriage of material within all leads and lifts and as per direction of Engineer-in-Charge. |
| 76 | 15mm cement thick plaster in single coat on rough side of brick masonry/stone masonry/concrete walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6.including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge. |
| 77 | Providing under layer for plinth protection of 75mm (seventy five milimetre) thick (un-consolidated) bed of dry brick/ stone aggregate 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground. including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge. |
| 78 | Providing and laying mechanically mixed and vibrated cement concrete 1:3;6(1cement :3sand :6 graded stone aggregate 40mm. nominal size) for surronding or encasting stone ware pipe of 300mm internal diametreincluding carriage of material within all leads and lifts and as per direction of Engineer-in-Charge. |
| 79 | Making Connection of galvanised steel distribution branch with galvanisedmild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete.incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 80 | Fixing water meter stop cock in galvanised mild steel tube including necessary fitting such as mild steel galvanised jam nut,sockets étc.cutting and making long screws complete (water meter and stop cock to be measured and paid for separately)a)15mm nominal bore incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 81 | Providing and fixing Orissa Pattern long pattern as per pattern No.20042. vitreous China wash down, water closet squatting pan (Indian type W.C pan) size 580mm (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge. |
| 82 | Providing and fixing wash basin with C.I. brackets, 15mm PTMT pillar cock, 32mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Circular wash basin size 550x400 mm with single 15 mm PTMT pillar cock. incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 83 | Providing and fixing PTMT Coloured / white high density polyethylene/poly propylene 10 litres capacity (full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40 mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 84 | Providing and fixing plastic seat (Solid/Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers:1 SOLID TYPE Black plastic seat and cover.ncluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 85 | Providing and fixing 32mm (Thiryt two millimetre)nominal bore C.P. Brass flush pipe /spreders for urinal with fittings such as unions ,clamps etc. (all in C.P. Brass) including cutting holes and making good the same. incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 86 | Providing and fixing wash basin with C.I. brackets, 15mm PTMT pillar cock, 32mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock.ncluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 87 | Providing and fixing waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 88 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 89 | Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws.ncluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 90 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern.ncluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 91 | Providing and fixing toilet paper holder : C.P. brass incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 92 | Providing and fixing C.P. brass bib tap of approved make with capstan head 15mm ( fifteen millimetres ) dia , incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 93 | Providing and fixing C.P. brass pillar tap of approved make capstan head 15mm ( fifteen millimetres ) dia, incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 94 | Providing and fixing C.P. stop cocks : of approved make 15mm ( fifteen millimetres ) dia , incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 95 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :- 15mm nominal bore , incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 96 | Providing and fixing waste pipe for sink or wash basin including waste fittings complete. Semi rigid pipe 32 mm dia , incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 97 | Providing and fixing brass full way valve of approved make, incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. 15 mm dia nominal bore |
| 98 | 20mm nominal bore. |
| 99 | Providing and fixing PVC water storage tank of ISI: 12701 marked, G.I. inlet and outlet connection, 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level:- 2000 litres net capacity tank.incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 100 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge.110mmx90mm |
| 101 | 110mmx75mm |
| 102 | Providing and fixing PTMT jet spray of approved quality and colour with 1.50 mtr. (one point five zero metre) Tube. incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 103 | Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahni trap, incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 104 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge.150 mm dia |
| 105 | 110 mm dia |
| 106 | Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimeter) thick bolts and nuts complete including fixing with approved adhesive etc. complete.incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge.150mm dia |
| 107 | 110mm dia |
| 108 | Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete.incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge.150mm dia |
| 109 | 110mm dia |
| 110 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete.incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge.150mm dia |
| 111 | 110mm dia |
| 112 | Providing and fixing PVC single equal branch plain bend ISI marked including fixing with approved adhesive etc. complete.incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge.150mm dia |
| 113 | 110mm dia |
| 114 | Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete.incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge.150mm dia |
| 115 | 110mm dia |
| 116 | Providing and fixing to wall ceiling and floor galvanised mild steel tubes (medium grade) tube fittings and clamps including making good the well ceiling and floor including carriage of materials in all leads and lifts as per direction of Engineer-in-charge complete 20mm nominal bore. |
| 117 | Providing and fixing Polytheline-Aluminium-Polythelene(PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black conforming to IS-15450-2004 water supply including clamp at one metre spacing, cutting,fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall. Internal work-Exposed on wall.incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge.1216 (16mm O.D. pipe) |
| 118 | Providing and fixing Composite end seal compression fittings as per IS-15450-2004 for old water supply e.g. tees elbows ,reducers ,connectors,couplers ,and clamps with jointing testing and fittings complete including cutting and making good and the wall etc.incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge.Eual tees1216 |
| 119 | Reducing tees1620xall branches |
| 120 | Female branch tee1216x1216x15mm thread |
| 121 | Female elbows1216x15mm thread |
| 122 | Male thread connector1216x15mm thread connector |
| 123 | Female thread connector1216x15mm thread connector 216 |
| 124 | Couplers 1216 |
| 125 | Reducers1620x1216 |
| 126 | Site Development Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 127 | Earthwork in excavation for structures as per drawing and technical specifications clause 305.1 upto 3 metres depth.incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 128 | Providing and laying cement concrete 1:5:10 (1 cement:5 sand : 10 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering.incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 129 | P/L Cement concrete 1:4:8 ( one cement : four sand : eight graded stone aggregate twenty five millimeter nominal size)for plain/ reinforced concrete work in open foundation complete as per drawing and technical specification Clauses 802,803,1202& 1203.incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 130 | Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7, incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 131 | Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification clause 1204.3.8 including carriage of material within all leads and lifts. incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 132 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level:- Mild steel and Medium Tensile steel bars,incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 133 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works,incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 134 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge.On steel work |
| 135 | Excavation in drain and channels in all heights and depths in all kinds of soil, including saturated soil comprising of pick work, jumper work and blasting work both in soft and hard rock with chiselling and wedging out of rocks (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in-Charge at site., |
| 136 | Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm,so as to give including centring, shuttring, strutting and propping etc. with wooden /steel battens and ballies, height of propping and centring below supporting floor to ceiling . Vertical surfaces sucha as walls pratitions and the like including attached pillasters buttresses, plinth and string courses and the like, incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. |
| 137 | Providing and laying reinforced cement concrete 1:1.5:3 ( 1 Cement: 1.5 sand: 3 graded stone aggregate 20mm nominal size compacting the concrete with mechanical mixure and vibrator and curing complete excluding cost of orm work and reinforcement for reinforce concrete work in: incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender